When And How Are Birch Brooms Prepared? How Are They Collected And Prepared For The Bath? How Do They Knit? What Time Can Birch Brooms Be Prepared?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

A broom is not just an attribute of a sauna, but also a "tool" that increases the efficiency of vaping . With its help, massage is done, increased blood and lymph flow is stimulated. The beneficial substances released when the broom is heated have a positive effect on the atmosphere of the bath. True, these statements are true only if the broom is properly prepared and used.

When can you pick branches?

According to an old custom, birch brooms are harvested on Trinity, on the 50th day after Easter . Beginning from that day and 2 more weeks after it, brooms were knitted in Russia. If we talk about the calendar dates, then this is the beginning or the middle of July. Sometimes the collection time shifts to the second or third decade of the second summer month.

Our ancestors believed that the plants collected in the Trinity have magical powers and bestow healing . There is some truth in this - from a botanical point of view, this season is the heyday of nature. Plants are full of biologically active juices, and the hot summer sun has not yet scorched them. During this period, the leaves retain their tenderness and softness, the twigs - elasticity (as if they adhere to the skin while steaming, but at the same time do not cause pain).

Finally, it is during this period that the leaves contain the maximum amount of useful esters.

Professionals recommend navigating to the stages of life of the plant itself - it is necessary to chop branches for a broom before the earrings appeared on the birch . You should also pay attention to the condition of the birch leaves - it is important to have time to prepare the branches before the upper part of the birch leaf is roughened. It should remain soft velvety. In this case, the leaf itself should be firmly attached to the branch, not fly off it.

The leaves should be young, strong and fresh, and exude a light aroma . In this case, the broom will last a long time and will release useful substances during the steaming process.

Popular belief recommended to lick the top of the sheet. If it is rough, then the deadline for harvesting brooms was late. The soft and delicate surface of the leaf indicates that now is the time to cut the branches.

However, you should not rush into the process too much - young leaves are weakly attached to the branches . Such a broom will quickly become "naked", it will be inconvenient to use it, and the effectiveness of bath procedures will decrease.

To check how firmly the leaves are attached to the branches, a simple test will help: you need to pull the tip of the leaf - only a piece of it should come off, and not the whole leaf. Otherwise, you are probably late with the preparation of brooms.

It is fair to say that for different regions of the country, the timing of harvesting brooms can be shifted. For example, in the Urals it may be earlier than in Siberia. There are sources indicating that in some regions they store brooms for the winter starting from Petrov's day (July 12).

As already mentioned, it is more correct to focus on the biological cycle of birch and have time to collect it in the interval after the flowering of the birch, but before the appearance of catkins on it.

The next point is to choose the right day for harvesting. It must be a dry, sunny day … If you cut off wet branches, then soon the leaves will turn black, and the broom will acquire an unpleasant musty smell. Therefore, they start cutting when the dew dries.

DIY preparation instructions

The quality of the broom, which means that the effectiveness of its use largely depends on how correctly the branches are cut, dried and tied. A product prepared in accordance with all the rules is always strong and in a special aromatic way. The size of this bath accessory can vary, but in general it reaches half a meter in length.

Manufacturing products cannot be called difficult … The main mistakes are associated with the wrong choice of time for cutting branches, their wrong drying. Brooms are prepared on the basis that one product is enough for 2-3 steams.

Selection and cutting of branches

The first rule is to choose trees that grow in ecologically safe regions. Avoid plants near factories and plants, roads, sewage treatment plants.

Branches of weeping and curly birches are considered the best for brooms . Such grows near rivers and reservoirs, in shady lowlands. Bars from birch trees, on which earrings have not yet appeared, are used.

The best option is to cut off young branches growing at the bottom of the tree . The branches should be cut with a garden pruner, giving preference to the lateral leaves. Those who simply break and tear branches can damage the plant and even provoke its death. Know when to stop - cutting off a large number of branches, you doom the tree to death.

For convenience, you can climb the desired branch, tilt it and fix it by tying it to a neighboring tree. After that, go down and cut the required number of branches. After finishing cutting, untie the tree. Birch branches are elastic, so such manipulations will not be harmful.

Standard - a broom with a rod length of 50-60 cm . They should all be straight, outwardly about the same. However, you can focus on your preferences - it is more convenient for someone to use a broom 40-50 cm long, for others the best option would be a product 70-80 cm in length.

Knitting

It is a mistake to think that the branches are simply tied with twine or rope. Knitting is carried out using a special technology, thanks to which the inner branches are protected by the outer ones. This saves the broom.

Beforehand, it is recommended to “dry up” the branches in a dry and warm place during the day. In no case should the branches be exposed to direct sunlight .… From this, the leaves will quickly curl up and become brittle, their healing aroma will evaporate. Such blanks are not suitable. However, like those that were dried in a damp or too dark place, in a draft.

You do not need to rinse the broom - you remember that the leaves will turn black in this case.

The branches can be either unfolded or hung to dry. If prepared correctly, then in dried form, the blanks have an emerald green tint of leaves and a delicate pleasant balsamic aroma.

Before knitting, withered branches are laid out on a sacking, after which you need to remove the leaves and twigs in the place of the future handle of the broom. It is convenient when the handle is 1/3 of the entire length of the product (as a rule, it is 15 cm).

For a broom, usually take 2-3 strong branches with forks … Thicker branches should be on the inside and thinner ones on the outside. In this case, it is necessary to protect the latter from breaking, so they seem to be tucked inside. Correctly weaving a broom is not lush, in the shape of a bouquet, but flat. You can also compare a correctly knitted product with a fan - all the leaves of the broom should be directed in one direction.

There should be a lot of leaves on the branches, you need to make sure that all the rods are on the same level - nothing sticks out . For aroma, you can put currant leaves or mint twigs in the middle of the broom. Some specialists also insert coniferous branches. However, they should be "hidden" inward, as they can damage the skin when vaping.

The thickness of the broom handle should be no more than 5 cm … First, we wrap the end with twine, after which the first winding is done closer to the end of the handle. After that, the handle is divided into 2 parts, around each twine makes a full turn. Now it remains to fix the twine in a few more places.

Don't pull the branches too tight , this will prevent the broom from drying properly. Do not use wire for wrapping - it can scratch your hand, and besides, it gets very hot in the bath. The best option is considered nylon thread.

Usually, after drying, the broom handle is trimmed with a hatchet, and its end is wrapped with something for more convenient operation of the product.

Drying

The final stage of harvesting birch brooms is drying them. The best place for this would be a well-ventilated, dry attic or shed with hay . If the broom is drying in a city apartment, then it should first be packed in a paper bag, and then hung on the balcony or mezzanine.

Exposure to direct sunlight on the bundles is unacceptable - from this, the leaves will instantly curl and become fragile.

It is not necessary to hang the bundle . You can lay a broom on a pile of meadow hay, and cover it with a layer of the same hay on top. The top layer of hay should be laid loosely, while maintaining gaps. Recommended daily turn the product over.

Professionals recommend holding the broom under light pressure for 1-2 days and only after that start drying. This will make the product stronger.

On average, the drying process takes a week. Ready-made brooms are stored in the dressing room or in the attic . The first option is considered optimal. The brooms can be stacked on top of each other - so they will slightly crumple, which will allow you to get the shape of a fan. It is traditional to hang products in pairs on a perch; medicinal herbs can also be dried between them.

For storage in the attic, it is better to build a pillow of hay under the brooms, and then lay the products on them. By analogy, brooms are stored in the hayloft, laying them out directly on a haystack and covering them with a “blanket” of the same hay.

If the brooms will be stored in a city apartment, a glazed balcony will do. You can wrap the brooms in a craft bag or put them in cardboard boxes to preserve the flavor. When using boxes, holes should be made in them so that the brooms can "breathe". When choosing a storage location, make sure it is cool and well ventilated.

If the broom is planned to be stored for more than 2 years, or there is a task to keep the leaves bright green, then the product should be sprinkled with salt crystals

Recommendations

It is not enough to properly prepare a broom, you also need to be able to steam it. If a young, recently prepared bath attribute is used, it is enough to rinse it in warm water. Then you can use it.

Brooms harvested in a month or more must be steamed … The golden mean should be observed, since insufficient steaming in time will cause a brittle broom - leaves will quickly fly off it, thin twigs will break off. If you exceed the timing, the leaves will absorb too much moisture, and the broom itself will acquire a sour smell.

Professionals recommend steaming the product in several stages . First, it is soaked for several minutes at home (that is, at room temperature) in cold water. Then the product is dipped in water with a pen and left for a few more minutes. This is necessary so that the handle also absorbs moisture.

After these manipulations, the broom can be taken to the bathhouse. Sometimes this preparation can be considered complete. In the bath, the broom is first brought into the steam room for 5-7 minutes (a couple of runs), after which it is used for its intended purpose.

If you carried a steamed broom in the cold, then let it "warm up" a little, first in the dressing room, and then in the steam room.

If you haven't prepared your broom beforehand, use an alternative soak . To do this, the product must be dipped in boiling water for a quarter of an hour, and then placed in the same water with a pen for another 20 minutes.

Finally, if no preliminary preparation has been made, and time is running out, you can use another method. The broom should be lowered into a bowl of warm water, and then put the container on a hot stove. The steam from it will rise, gradually and delicately warming up the product. On average, it takes 2-3 minutes to prepare a broom.

After use, the broom should be rinsed with warm water and then dried thoroughly. As a rule, a quality product is enough for 3-4 visits to the bath. However, the durability of the bundles also depends on how intensely you steam.

Below you can watch a detailed video about harvesting birch brooms.