Lampshade For A Bath (40 Photos): Plafonds Made Of Himalayan Salt And Corner Models, How To Choose And Install Lighting In A Steam Room

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

A modern bath is not just a place to wash. Many come here to relax, relieve fatigue or cope with stress. This is achieved not only by the contrast of temperatures, but also by soft, dim lighting, which does not irritate the eyes and does not affect the nerves. Special lampshades and shades made according to certain technologies will help in this.

How to choose?

The bathhouse has several premises. If the recreation room does not put forward special requirements for lighting devices, then the steam room (due to its functions) must be equipped with special lamps.

The plafonds in the steam room must meet the following requirements:

1. Moisture resistance. This is achieved due to the tightness of the product: a special gasket is located between the body and the glass. The security index according to the international system should be equal to IP54 and more.
2. Heat resistance. It is important that the sauna light source can withstand temperatures in excess of 100 ° C.
3. The light should be dim, diffused, soft.
4. Safety: the product must not burst.
5. Fire resistance.

It is very important to choose the right material for protection, because it is he who provides all of the above functions:

• Wood: natural material, environmentally friendly. Well suited for bathrooms.
• Plastic: must be heat-resistant, withstand temperatures over 100 °.

• Aluminum: it must also be heat-resistant. Particularly noteworthy is the thin aluminum shade with reflector. It allows you to qualitatively distribute the light flux and protect your eyes from bright light.
• Glass: Matte material with anti-fog effect is used. It can be of various shapes; metal parts give a special effect. Due to the sealed housing, incandescent lamps can be used in such shades.

Himalayan salt: it is not only beautiful, but also useful, since such lampshades have a healing effect. When heated, salt releases useful substances into the atmosphere, ionizes the air, kills bacteria, and neutralizes allergens. Salt lamps are very useful in the fight against diseases of the respiratory system, skin.

They normalize the nervous system and help cope with stress.

By shape, rectangular, cylindrical shades, products in the form of a ball, and other geometric shapes are distinguished. There are also triangular products. They are usually placed in the corners of a room to save space. In addition, it is quite convenient, since such a space is rarely used for any purpose. Such plafonds look very impressive and beautiful.

As for the location of the lamps in the bath in general, it is not recommended to place them next to the stove.

Even the most heat-resistant lighting devices are unable to cope with the hot air that comes from it.

Do not hang the plafond on the ceiling. As you know, warm air is concentrated at the top, and condensation will collect on the lamp. It is better to install it on the wall - closer to the ceiling, but not on the ceiling itself. And most importantly: this structure must be positioned so that it does not interfere with the rest.

What are the best bulbs to use?

Considering that the bath is a specific place (in terms of humidity and temperature), not all lamps can be used in it. For example, an incandescent light bulb must be used with caution, as it can burst if exposed to water. It is suitable for sealed shades - for example, glass. The protection class must correspond to IP56.

But it’s better not to risk it. After all, there are many more modern options for lighting elements:

1. Halogen lamps: quite a good option for a steam room. They are not afraid of high temperatures, since a reflector is inserted into them, and they themselves can heat up to temperatures above 300 ° C. Among the advantages of this element is protection against moisture and mechanical stress. The power of such lamps is 30W.
2. Fluorescent lamps: they are also heat-resistant, plus all - and energy-saving elements. By connecting a dimmer to such a lamp, you can adjust the brightness of the light and create interesting lighting in the room.
3. Optical fiber: it is a wire made of glass or acrylic, through which the luminous flux, regulated by the projector, passes. It is preferable to use acrylic as it is lighter. This material has all the properties that a bath lamp should have. With its help, you can create various lighting options - in the form of decorative lighting. It all depends on where the fiber is located.
4. LEDs: today it is perhaps the most economical and long-term option. With their help, you can create lighting in a wide variety of colors. The only drawback is that they are not too heat-resistant, which is why they should be placed closer to the floor.

In simple terms, this is a fence that covers the lamp.

It serves several functions:

• Protective: if suddenly the plafond or the light bulb bursts, all the fragments will end up in the lampshade, and not on the head.
• Prevention of burns - thanks to light diffusion.
• Decorative.

Bath lampshades come in various shapes:

Lattice: it consists of elongated slats fastened together. Such a lattice can be rectangular, triangular, trapezoidal. There are also semicircular models that frame the lamp from almost all sides. Reiki can be located strictly parallel to each other, be crossed, or you can show imagination and give them a special shape.

As a screen: it is a thin canvas with holes for light to pass through. Such products are cut in the form of a variety of patterns: leaves, flowers, African motifs. Screens are angular and wall-mounted.

For the manufacture of such protective products, I use the following materials:

• clay;
• glass;
• plastic;
• ceramics;
• silk.

Still, the most suitable and most frequently used raw material is wood.

Of the tree species, the following options are used:

• Linden: moisture resistant material. Delivers a subtle scent. An important advantage is the affordable price.
• Cedar, abash: they are heat and moisture resistant. Their fiber has a beautiful and unusual structure. These tree species are distinguished by a higher price.
• Vine, birch bark: these products are perfect for those who decide to make a lampshade with their own hands. They are easy to process and are not afraid of water.
• Products that combine several types of wood look very impressive.

It is worth noting a few more features of wood materials. Representatives of conifers are not suitable for a bath. When heated, they release a resin that can cause burns. Larch and cedar give the room a very pleasant aroma.

Features of protective fences

Consider the following:

1. Since the lampshade is a protective device, it must be strong and durable.
2. A construction made of environmentally friendly material should be used so that when heated it does not release toxic compounds.
3. The product must have good light transmittance and scatter light rays gently, without causing burns and pain in the eyes.
4. Resistance to fire and moisture: do not use products made of paper and fabric materials.

How to do it yourself?

To make a lattice wooden lampshade with your own hands, you need the following:

1. Before starting work, you should draw a sketch of the model.
2. Preparing the frame according to the sketch. It must accommodate a lamp shade.
3. Now you need to correct the wall. To do this, put foil on it at the place where the lampshade is attached. It will serve as a reflector. Thanks to the foil, the light will be uniform and the shadows from the gratings will not be projected onto the walls.
4. Modeling the lattice. What form its components will be depends on your imagination. The main thing is that they look harmonious and do not lose their properties. The wood should be sanded so that the planks are smooth and uniform.
5. To fix the lattice elements together, use glue or hardware. The latter are attached from the inside of the product so that they are not noticeable. The slats can be joined straight or tilted to give them a diamond shape.
6. A hole must be made at the base of the frame to access the light bulb.

The product is ready for use.

There is also an option for making a lampshade structure from willow branches - by weaving. This is a rather difficult method, but such products look subtle and very interesting:

1. Willow branches should be steamed before starting work so that they become more flexible and elastic.
2. After drying, you need to take 3 rods and connect them in an upright position. This is the basis of the product.
3. Then you should braid the base with the help of the remaining branches, starting each for all three of its rods. You need to continue working until you reach the top of the vertical structure.
4. Such a lampshade is attached to the plafond with the help of wooden slats.

There are a lot of lighting elements for a bath. Adhering to all the recommendations, you will find the right option for yourself and ensure a pleasant and safe rest for yourself and those around you.