Electric Dies: An Overview Of Die-cutting Dies For Threading Pipes, The Best Models, Tips For Choosing

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

In stores, you can find a large number of different models of klupp, which differ in the country of origin, material and dimensional step. The article discusses the varieties of electric threading die.

Species overview

Previously, round dies were used for threading pipes. Then the first simple hand-held klupps appeared on the market. A little later, ratchets appeared in the kit. And just recently, with the emergence of a great demand for construction, electric klupy appeared.

Electric plugs have the same principle of operation as manual ones, only electricity is used instead of manual labor

Electric thread-cutting dies are not usually subdivided into stationary and portable. They are all labeled as professional equipment, and therefore are used both at the enterprise and at home. The main difference may be power.

The set includes nozzles with metric threads (calculated in millimeters, and the angle of notches is 60 degrees) or inch (the calculation is carried out in inches, and the angle of notches is 55 degrees).

The principle of operation of the device is quite simple . A pipe is inserted into the nozzle of the required size. The tool is connected to the network, and when you press the "Start" button, the machine independently applies the thread. No extra effort needed.

This device is ideal for hard-to-reach places (of course, if the size of the device itself allows it). The diameter of pipes or other tips does not matter, since the kit includes different-sized nozzles that can be changed very easily.

The main advantage, which is most often noted by experts, is the possibility of restoring the old thread, when the previous one has completely worn out, or it needs to be extended (if, for example, a part of the pipe is replaced or cut off).

Among the disadvantages, it is noted that the tool is heavy and heavy due to the motor . The more power, the heavier the engine will be. And also the unit takes up more space, even while in the box. Many people compare the electric klupp with a grinder - they strongly resemble each other in appearance.

Electricity for this device is both a plus and a minus . The disadvantage is that the klupps constantly need food.

It is undesirable to carry out work in rainy or damp weather.

Top Models

Among any model range, there is always a rating of popular models that are in great demand among buyers. They have similar characteristics, so many do not know which device is better to choose. Most often, they choose the tool that they recommend, or it somehow fits into the acceptable price segment. Below are the popular models of electrical plugs.

ZIT-KY-50 . Country of origin - China. A budget option for professional activities. Carries out any amount of work on the application of threads up to 2 inches in diameter. The set includes a plastic case, an oiler and 6 interchangeable heads. The functional range has a reverse (reverse). Small size model. Among the reviews, it is noted that the device is ideal for home use. With too much use, it starts to warm up, and the attachments gradually become dull.

• Voll V-Matic B2 . Manufactured in China. It differs from the previous tool in higher performance and power of 1350 W. The set includes an oiler, another clamp-clamp, an adapter for the heads and the replaceable nozzles themselves. The tool has good reviews. Suitable for construction and home. Among the minuses, there are small problems with chip jamming, but this can be easily solved by disconnecting the tool from the mains and blowing it through.

VIRAX 1 / 2-1.1 / 4 ″ BSPT 138021 . Made in France. Belongs to the class of professional equipment. The direction of the thread is both right-handed and left-handed. The set consists of 4 heads and a vice-clamp. The entire tool is made of high-strength steel, which makes it highly wear-resistant. The speed is 20 rpm. Suitable for permanent and active work. Most often purchased by plumbers or construction sites. For one-time home use, the purchase will be impractical, since the price segment is quite high.

• RIDGID 690-I 11-R 1 / 2-2 BSPT . Country of origin - USA. Suitable for professional work. It has a strong motor and 6 interchangeable nozzles. Carries out high-quality threading. The body has a special button that protects against accidental activation. The body material is metal and fiberglass reinforced, which increases wear resistance and strength. The handle is made of special silicone that prevents slipping.

There is an additional button that releases the device after completion of work.

REMS Amigo 2 540020 . Made in Germany. Clean threading. The head has special outlets for chips, so the work is carried out many times faster. The clamp adheres well to the surface, which gives extra grip. The set contains 6 hardened steel heads. Everything is packed in a portable metal case. Has both right and left travel.

700 RIDGID 12651 . Made in the USA. The model is designed for heavy work. The weight of the product is 14 kg, the number of heads is 6. Power is 1100 watts. Equipped with a reverse and additional power reserve. The body is made of die-cast aluminum alloy. Threads pipes 1”and up. You can purchase an adapter and use heads of a different diameter.

Selection Tips

Before buying, you need to study all the characteristics of the model in order to better understand the principle of subsequent work. And you can also make a small list of requirements for klupps. When buying a tool, you should rely on the following criteria.

• Weight . It is necessary to understand that each device differs in weight. There are models weighing 0, 65 kg, and some are weighing up to 14 kg and more. Therefore, before buying, you should hold the instrument in your hands for a while in order to listen to your feelings.
• Power . The speed of the work performed depends on this characteristic. But the cost of the appliances is also starting to vary. The more engine power, the higher the price tag.
• Number and size range of nozzles . The most common size range is considered, where there are heads of 1, 1/2, 1/4 and 3/4 inches. It is better to select models in which the subsequent replacement of nozzles is possible (that is, buying a specific head, and not a whole set). Some klupps go without the possibility of changing the cutter, that is, after the cutting edge is erased from the nozzle, it will not work to replace it. In this case, you will have to purchase a new tool. This is considered a tricky marketing ploy, most often found in budget models.
• Dimensions and material . There are small models that are convenient to work with, but they do not come with a handle. This means that it will take time to develop dexterity. The material of manufacture in this case is also responsible for the service life.

After compiling such a list, you can go to any store and start trying on the tool . There are a large number of electrical plugs of both Russian and foreign production on the market. Many people point out that the imported assembly is of better quality.

It is necessary to purchase any tool in specialized stores that have product certification.

Application

The scope of application of electro-lugs is quite large: from threading various pipes to using in the assembly of volumetric structures (for example, stairs or greenhouses).