Electric Tile Cutter: Manual And Professional Electric Cutter. Which Is Better? Diamond Tile Cutter 1200mm And Other Models

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

A tile cutter is a special tool that is used to cut cladding materials . The device is distinguished by its safe operation and long service life. Today, manufacturers of electric tile cutters offer consumers a large selection of units, and it is not always possible to immediately choose the right tool.

It is worth taking a closer look at what should be considered when buying and what is the difference between the models

Features, advantages and disadvantages

Electric cutter - a tool equipped with an electric drive and a diamond-coated disc. Among the main characteristics of the device:

• straight cut line;
• minimum chips;
• the ability to cut material at an angle;
• high security.

With a tile cutter, you can also provide grooves

Varieties

The construction machinery market has a large selection of electric tile cutters from different manufacturers, from table-top to floor-standing. All tools can be divided into several categories.

Floor-standing household

Most of the tile cutters are included in this group . The frame structure is electrically driven. In the upper part there is a working surface in the form of a table, in which a special slot is provided, where the cutting element rotates. Part of the part in the process of work passes through water, which is poured into a cuvette. This solution allows you to quickly cool the disc and reduce the amount of dust.

The pluses of floor-standing household tile cutters include:

• compact size;
• affordable price;
• light weight;
• the ability to cut any tile material.

The equipment is suitable for use with small volumes, where the tiles can be held by hand.

Bridge with the upper engine position

A group of professional tools providing high cutting quality . Tile cutters are distinguished by their complicated design and high cost, and are more suitable for use in production or large enterprises. The peculiarity of bridge tile cutters is that during the cutting process it is necessary to move the working disc relative to the platform. Among the pluses:

• the ability to control the cut and its angle;
• fast disk cooling due to the pump pump;
• even cut without chips.

The system is equipped with convenient clamps that hold the tiles in the desired position.

Cantilever with the location of the motor on top and a movable bed

One of the popular groups of tile cutters used by builders . Tools in this category are distinguished by a massive frame, which is mounted on an electric motor. Also, the design provides for:

• cutting wheel;
• platform;
• guiding elements.

The key advantage of the cantilever tile cutter is the ability to cut tiles of all sizes . The tool will provide high cutting accuracy. This does not require a compressor to cool the cutting blade. The only drawback is the high price.

Manual pruning

The simplest type of electric cutting tool that is suitable for both professional and home use … In terms of functionality, the tile cutter resembles a standard grinder. Among the features are the following factors.

• Versatility … The units provide a smoother and more high-quality cut compared to angle grinders.
• Comfortable handle . No effort is required to operate the tool.
• Good fixing of the cutting disc to the tile . During use, the equipment does not jump off and does not change the cutting trajectory. In this case, the operator can adjust the immersion depth.
• Possibility of connecting additional equipment . Some models of tile cutters can be connected to a vacuum cleaner or water supply system to cool the disc and ceramic.

Some handheld models have a replaceable battery for mobile use. The compact size of the device makes it easy to cut in almost any conditions. The thrust platform does not allow the disc to play, as it happens when working with a grinder.

Review of popular models

The construction machinery market is represented by a large selection of electric tile cutters. When choosing a reliable tool, you should give preference to models from trusted manufacturers - Italian, Swedish, German and Russian.

Husqvarna TS 66 R

The peculiarity of the model is in the water cooling system, which prolongs the life of the device and prevents excessive heating of the cutting element, facing material. The tile cutter design includes:

• frame;
• cutting wheel;
• motor;
• pump.

The latter is responsible for the water supply. The Husqvarna TS 66 R attracts operators with a comfortable grip, reliable performance and high cut quality. For the evenness of the saw cut, experts advise using a ruler.

Elitech pe 600

Well suited for high volume applications. The maximum power of the tool reaches 0.6 kW, and the size of the cutting wheel is 18 cm. This design makes it possible to cut tile and porcelain stoneware material. Peculiarities :

• galvanized frame construction, resistant to corrosion;
• water supply without a pump;
• no restrictions on the cut length of 1200 mm;
• the convenience of use.

Among the disadvantages are the high cost and massiveness of the equipment

Diam sp 200 0 8 600030

Tile cutting machine for professional use. Advantages:

• high power;
• adjustment of the inclined angle of the cutting element;
• stability;
• long service life.

If necessary, the operator can adjust the level of water that is supplied to cool the disc. The tile cutter is absolutely safe to use. The disadvantages include the noisy operation of the unit and its high cost.

Rubi nd 180 bl

Automatic tool for cutting tile material. The motor power is 0.55 kW and the cutting wheel diameter is 18 cm. Features of the model:

• a fixed work surface that can be installed at an angle;
• excellent engine performance, which practically does not make noise during operation;
• simplified stop for easy cutting.

The liquid supplied to the cutting element is not splattered, which increases the safety of the tool . Operators consider the disadvantages of a thin working surface and poor quality of discs. But at the same time, the tool has a reasonable price.

Fubag pk 30 m

An expensive model for professional use . Large dimensions and high power allow you to work with increased volumes of facing material. The diameter of the sawing wheel is 30 cm, and the speed of the disc exceeds 2800 rpm. Peculiarities:

• galvanized work surface;
• long service life;
• cutting any tile material.

The downside is the high price . However, the model does an excellent job with any task and is popular in enterprises.

"Practice" 1872

The tile cutter of a domestic manufacturer is suitable for both professional and home use . The compact medium power tool cuts up to 2 cm deep. Pros of the model:

• the convenience of use;
• light weight;
• affordable price.

Among the disadvantages is the lack of a cooling system . To prevent overheating of the disc, the tool will need to be submerged in water during use.

DeWALT D24000

Tile cutter of the American brand . The power of the device reaches 1.6 kW, which is suitable for working with large volumes of plates from different materials. Features of the model:

• stationary location of the cutting disc;
• movable platform on 6 rollers;
• splash guard to prevent overheating of the disc;
• stops for cutting at 45 degrees;
• high spindle speed.

The device provides a high quality cut. The construction of the tile cutter is coated with special compounds that are resistant to corrosion. This decision by the manufacturer will extend the life of the equipment.

FUBAG Masterline 6 Star - 660

The tile cutter of the German manufacturer has a power of 800 watts . The cutting element provides a cutting depth of up to 40 mm at right angles, with a maximum length of 660 mm. The advantages of the model include:

• the ability to cut marble, tiles, mosaic tiles and granite;
• lack of noise and extraneous sounds during operation;
• long service life;
• adjustment of the motor along the axis.

Among the minuses, there is a low side of the platform, behind which water is poured.

RUBI DU-200 EVO 55903

The tile cutter was created by a famous Swedish manufacturer. The maximum cutting length is 660 mm and the cutting depth reaches 40 mm. The tool is suitable for cutting:

• ceramics;
• stone;
• tiles.

The model provides a system for changing the angle of the bracket. Other features:

• smooth cut without an edge;
• stable construction;
• smooth start of the motor.

The disadvantages include the inconvenient location of the power button, which was placed on the body, and not on the handle.

Selection Tips

The choice of an electric tile cutter should be approached carefully. Professionals advise taking into account all the nuances when buying an instrument.

• Tile cutter type … Among the wide variety of tools, several categories are distinguished, which were discussed in detail above. In turn, all devices can be classified into two groups: with the bottom and the top of the disk. The former are compact in size, the latter are more suitable for working with large volumes of facing material.
• Power … Makes it clear what kind of material the tool is suitable for. The higher the power, the wider the possibilities of the model. So, for example, for cutting ceramic tiles, an aggregate with a power of up to 1.5 kW will be enough, and for working with a finishing stone, preference should be given to models with a power of 2 kW or more.
• Disk size . Directly proportional to power. The higher it is, the larger the cutting disc and the dimensions of the tile cutter. It is better to buy large units if you plan to cut large and heavy materials.
• Length and depth of cut . The standard indicator is from 40 to 110 mm. When working with marble and granite, it is better to choose devices with a cutting depth of 135 mm. These are models with a disc with a diameter of 350 mm.

Taking into account the listed criteria will allow you to choose a tool depending on the operating conditions. Avoid buying an expensive, high-power multifunctional model if you are cutting simple materials in a small amount.

Additionally, you can pay attention to the functionality of the tool. Some models are equipped with a laser, others provide dry cut access.

Application nuances

Before you start cutting the facing material with a special tool, you should understand the features of its use. Recommendations for the operation of an electric tile cutter.

• Before starting work, it is worth placing a film under the device, additionally wrapping it around . This is to prevent splashing of liquid during cutting.
• The work is worth doing in goggles, gloves and other personal protective equipment depending on the degree of danger of cutting.
• Inexperienced operators are better off first practice on damaged material , to achieve a clean cut.
• Before cutting markup should be done regardless of whether the cut is straight or diagonal. Then it will be possible to make it as even as possible.
• Recommended tiles fix tightly on the working surface of the table to prevent unnecessary vibration.
• When the disc enters the tile no need to press too much , so that no cracks or chips appear.

You can learn how to work with a tile cutter from a master who understands the features of the operation of the equipment.