Swimming Pool Conservation For The Winter (24 Photos): How To Properly Clean The Pool? How To Fold It And Prepare It For Storage According To The Instructions?

Table of contents:

Video: Swimming Pool Conservation For The Winter (24 Photos): How To Properly Clean The Pool? How To Fold It And Prepare It For Storage According To The Instructions?

Video: Swimming Pool Conservation For The Winter (24 Photos): How To Properly Clean The Pool? How To Fold It And Prepare It For Storage According To The Instructions?
Video: Pool Care for Beginners- How to clean and maintain your pool- Filmed in 4k 2024, March
Swimming Pool Conservation For The Winter (24 Photos): How To Properly Clean The Pool? How To Fold It And Prepare It For Storage According To The Instructions?
Swimming Pool Conservation For The Winter (24 Photos): How To Properly Clean The Pool? How To Fold It And Prepare It For Storage According To The Instructions?
Anonim

The presence of a pool will delight any owner, while preparing this structure for the winter can cause many problems. Consider the options for preparing stationary and frame structures for winter storage.

Image
Image

Why do you need to prepare for the winter?

An indoor pool can please the owner all year round, but outdoor options will require special preparation for storage during the winter period. It is necessary to remove seasonal structures in the country and prepare stationary pools for winter before the onset of cold weather.

Image
Image

Improper preparation for the cold season or storage in unsuitable conditions can damage the structure of the pool or disable it, so some nuances should be taken into account.

Image
Image

Outdoor pools can be of several types:

stationary (plastic, composite materials, concrete) models that are installed in a certain area for many years;

Image
Image
Image
Image

portable (frame, inflatable, inflatable with frame) models - they will need to be cleaned for every winter.

Image
Image
Image
Image

Each variety requires its own procedure in preparation for the cold season.

Methods for preserving stationary structures

There are two types of preservation of stationary models - with and without water. It is generally accepted that preservation with water is more favorable for the surface of the pool itself (under the influence of freezing soil, pressure is formed on the walls of the pool, which is successfully neutralized by frozen water) and its lining. therefore leave the water in the pool or not - you need to decide for yourself.

At the same time, keep in mind that if the walls of the pool are in contact with the ground, and your winters are so severe that the ground will freeze, then the pool must be filled with water for the winter.

Image
Image

With water

To leave a bowl filled with water for the winter, you need:

  • clean the auto-chlorinator of disinfectant, then flush the system for half an hour with running water;
  • clean the pool structure with soft brushes from accumulated dirt (for a surface made of tiles, mosaics, films or plastic, special means are required, household chemicals will not work);
  • rinse the filter;
  • drain the water from the bowl;
  • remove lighting fixtures, insulate wires and bring them over the sides;
  • all recesses from the lamps and nozzles are closed with foam plugs;
  • close drain pipes with special plugs;
  • fill the bowl with water with the addition of a preservative;
  • install pressure compensators;
  • cover the pool with a special cloth.
Image
Image

Pressure compensators are used to to reduce the water pressure on the pool walls when it freezes . These can be plastic bottles located around the perimeter of the pool, or foam plates. Any material that can compress, up to old rubber tires, will do. For shelter, an awning made of tarpaulin or PVC, bubble coating is usually used.

Image
Image

Dry

The dry system is used for those pools which are located in the foundation of the building, on the roof . Also this method is used for shallow ponds in latitude with non-freezing soil, if the pool bowl is made of plastic.

If the walls of the pool are located above the ground, and the bottom is at its level, then it should also be left dry for the winter, that is, without water.

Image
Image

How to clean a collapsible or inflatable pool?

Wireframes are of two types. Frost-resistant ones can be left to winter at the location, demi-season structures are disassembled and brought into a warm room. You can clarify this information in the pool passport or operating instructions. In order to assemble a pool with your own hands, you must:

  • clean it with mild cleaning agents;
  • drain the water;
  • remove and process the filtration system;
  • dry the structure;
  • disassemble the equipment;
  • transport the pool to a warm place for storage.

To prepare the inflatable pool, you must perform the same steps, except for operations with the filter system.

Image
Image
Image
Image

How to fold?

The dismantled pool bowl made of PVC materials needs to be dried and rolled up, avoiding a large number of creases. If inside the structure is located special cable then it follows remove before folding . The walls of round pools are folded inward, then the product is folded in half, and then in the shape of a triangle. The oblong models are folded in half to form a compact convolution.

When folding the pool, the formation of tight bends and tight rolls should be avoided - this can provoke damage to the material.

Image
Image

Inflatable models will require deflation . Before folding, such a product can be treated with talcum powder - this will help get rid of moisture residues and prevent the surfaces from sticking together upon contact.

Image
Image

How to store it correctly in winter?

All removable elements, including the frame and the film, must be stored in a dry place, wrapped in a separate bag. It is not recommended to put foreign objects on the part of the pool or on the PVC sheet itself. Eliminate the proximity of the structure with sharp objects . During storage, avoid heating the elements or covering them with ice. Same try to avoid sudden changes in temperature.

Image
Image

Useful Tips

Time the work correctly . Cleaning the pool surface will take a whole day, while drying and dismantling will take a second. It makes sense to have the help of a second person to save time. Make sure bad weather conditions will not interfere with the work. The air temperature must be above 15 degrees Celsius. Precipitation should also be excluded.

Image
Image

The use of special brushes and rags for the pool will greatly facilitate the cleaning process … Fill the container with water in the filter backwash mode. The pump will need to be turned off at this moment. In order to avoid the appearance of bacteria and deposits on the walls, water treatment will be required. The run of water with a preservative is carried out for several hours. Special cleaning products must be purchased from the installer of the pool, or they must recommend a specific brand. Cleaning agents must not come into contact with the soil and groundwater.

All cleaning work is best done in compliance with safety precautions - you need to work in a rubberized suit, goggles and a respirator.

After washing the pool, the water will need to be drained or wiped out without residue . Pool cleaning and equipment removal should take place when the facility is completely de-energized.

Image
Image

The filter valve must be switched over with the pump off, otherwise it may jam . After completion of the backwash, the valve is placed in seal mode and normal filtration mode. After adding a standard preservative liquid, a chemical must be added to the water to prevent salt build-up on the pool walls. Also, this solution contributes to faster cleaning of pipes in the spring.

Image
Image

Water should be poured 10 centimeters below the level of the nozzles - this will help keep them when the ice freezes . If there are drain gutters, the water level is lowered by 20 cm, and the Roman staircase will oblige to raise the water level no higher than its second stage. Compensators are recessed at a distance of 10 centimeters from the bottom, for this it is better to use sandbags. They should be placed crosswise or along the center line. An ordinary rope or wire will help with this. This will help prevent the bowl from breaking as the ice expands.

Image
Image

The pipes must be blown out or removed . You will also need to remove the heat exchanger, filter, circulation pump, counter-flow elements. The soil under the pool should also be free of foreign objects or plants. It is highly discouraged to postpone this process until the spring. Some owners prefer to dismantle the pool and leave it in the garden or at their summer cottage, simply covering it with a film or crushing it with something heavy. This storage method can hardly be called correct. The bowl and structural elements can be damaged by weather conditions or by pets and rodents.

Image
Image

During wintering, you should not roll on the surface of the ice on the bowl or try to break it . The resulting snowdrift will need to be carefully removed. When melting ice, do not use salt or any means to speed up the process.

Image
Image

Correctly executed fall dismantling and spring assembly will contribute to a long service life of your pool.

Recommended: