2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Today, a pool in the country or in a country house is no longer a luxury, many can afford it. It is a great opportunity to cool off on a hot summer day, and can be used by both children and adults. However, rubber tanks have disadvantages, one of which is the possibility of punctures and gaps. However, today this is not a reason to get rid of the product - it is enough to simply fix it without even draining the water.
How can you glue?
As for inflatable pools, their undeniable advantages are affordable cost, light weight and ease of use … However, despite the fact that rather strong polymers are used for their manufacture, products easy enough to pierce with sharp objects or, for example, with the claws of pets. The situation can be remedied by having the necessary materials on hand.
Scotch
It is a good alternative to repair kit or waterproof glue, but it can only be used in emergency cases, and its effect is short-lived. In order to repair a pool with tape, you must follow a certain pattern.
First of all the area of damage is determined, on which a hole is marked with a felt-tip pen . The puncture site is thoroughly cleaned, after which it is properly dried. This is a must, as the tape will not stick on a damp surface. It is best to finish the preparatory work by degreasing. The tape is glued directly over the hole . You can also use a patch instead. However, experts remind that this measure is extremely urgent.
The result cannot be called qualitative, since the use of scotch tape occurs in conditions of high humidity. The effect may last for 1-2 days.
Waterproof glue
Waterproof glue must be in the arsenal of every pool owner. In order to build a reliable patch, you can use it in combination with a piece of PVC . The material is easy to find; if necessary, it can be cut out of an inflatable toy or circle. It should be borne in mind that scotch tape and electrical tape in this case are strongly discouraged. Almost any glue that has a waterproof effect and is suitable in this case will do, you can use polyurethane or cyanoacrylate.
On store shelves, there is a special glue for eliminating leaks called "Liquid patch".
It contains PVC and active reagents … The composition is optimal for the repair of swimming pools and other rubber products. In the process of exposure, the components dissolve the upper layer of PVC, and then mix with it, forming a single solid surface.
It should be noted that the use of such a material is much more expedient than the use of scotch tape . The result is much more durable. Special vinyl adhesives have an affordable cost, tolerate high humidity well, harden quickly enough and are not afraid of even strong mechanical stress. They are calm about stretching and compressing, thanks to which the pool can be inflated and stored.
Before use, you should carefully read the instructions, since each process may have its own nuances.
A two-component waterproof compound for PVC is popular with consumers . It consists of two parts, which are mixed immediately before use. Only then is the glue applied to the damaged area.
Sealant
A special sealant can be used if the pool has small cracks or minor damage . It is quite simple to use. It is necessary to apply the composition to the damaged area, let it dry, and then repeat the procedure . The sealant will polymerize when it comes into contact with air. It can be used for both tap and seawater pools, but the composition types may vary. It is used in combination with any materials without harming them and successfully eliminating leaks.
Repair kit
These kits are sold in specialized stores, and sometimes come with a pool. Experts recommend that you definitely have one at home . Contains waterproof glue and vinyl patch. You can choose patches of the required size and color . When it comes to a volumetric frame pool, it is recommended to pay attention to the flaps made of reinforced material.
They are able to withstand even severe pressure from large amounts of water.
Self-adhesive patch
These products are also purchased from specialized retail outlets. The material for their manufacture is rubber, and one of the sides has an adhesive base. Such a film can be glued both on a dry and pre-treated surface, and directly under water. Efficiency is not particularly different from the repair method.
Leak repair process
If your PVC pool suddenly starts to deflate, it's time to take action. The first step is to find the hole . It can be one or several. Several methods can be used for detection. You can try to inflate the rings one by one, submerging them in water one after another. If there is a puncture, air will escape through it, causing bubbles to appear on the surface.
If the tank is large enough, you can do it easier. A thick soapy foam is whipped, which must be slowly applied to the tightly inflated rings. The escaping air will also form bubbles.
Defects found are marked on the surface with a bright marker to make them easier to find when repairing … After that, you can start working. A patch is put in place of the leak and outlined with a felt-tip pen. After that, the area must be carefully processed. To do this, it is cleaned, wiped dry and processed with fine sandpaper. Next, degreasing is performed using a solvent, for example, alcohol or gasoline.
After that, it's time to move on to sealing the hole. Glue is applied to the damaged area, and a patch is placed on top. For a more secure adhesion after 5-10 minutes, it must be pressed tightly to the surface . You can roll the place with an ordinary glass bottle.
The glue dries for a long time: according to various instructions - from 2 to 12 hours.
The use of liquid patches is based on a different principle . It is applied to the puncture site with a very thick layer and left for 1-2 days. If the hole is large enough, more than 3 centimeters, it must be sewn with PVC threads before processing. This will help improve the connection.
Modern materials allow even a pool filled with water to be glued from the inside . If the drain is taking a long time and summer is in full swing, temporary repairs can be made. In this situation, the only thing that can be done is to patch both sides of the tank. You can buy repair kits in sports stores, they are presented there in a fairly wide range. Such patches represent tape having an adhesive layer on one side . To repair the pool wall, you will need to cut off a patch of the required size, remove the protective coating and place it on the puncture site, first from the inside and then from the outside of the pool.
Even under water, the tape will hold perfectly, which will eliminate the leak.
The scheme for working with a number of glue mixtures and patches is slightly different from the usual one . It is necessary to apply glue to a piece of special oilcloth, after which it is doubled for a couple of minutes. The patches are also glued to both sides of the puncture. However, the option when the pool is repaired without draining the water, experts urge to consider it temporary. After the end of the season, more serious renovation work is required.
Preventive measures
Preventing a problem is much easier than fixing it. Therefore, experts recommend paying attention to simple preventive measures that will make it possible to postpone the issue of sealing the pool as much as possible. First of all, it should be noted that when opening the package, it is strictly forbidden to use sharp objects . This is especially true for inflatable PVC pools. The fact is that during the opening process there is a risk of damage to the new product even before it is installed.
When placing the pool, it should be borne in mind that it is better to place it away from bushes and trees . They have sufficiently strong branches that can pierce the surface.
It is also worthwhile to separately talk about pumping up circles . Many people think that the tighter they are, the better, but this is not entirely true. From overvoltage, the material can simply burst or diverge along the seam. In addition, if you leave the pumped product in the sun, the air will heat up and, as a result, its expansion. This will increase the internal pressure. therefore when placing the pool in an open place, it is better not to be zealous with pumping it up.
Do not forget that on the surface on which the pool is installed, there may be sharp objects, stones or branches, which can also lead to cuts and punctures. To avoid this, it is worth thinking about the underlay.
Specialists do not recommend using PVC tanks for bathing pets , as they can accidentally damage the product with sharp claws. It is not recommended to jump on inflatable products, as they can simply burst.
Also, any pool you need clean regularly . Dirt over time can lead to material deterioration.
As you can see safety rules are not particularly difficult . If you take good care of the product and take good care of it in a timely manner, it will be able to serve for a long time, and the question of sealing defects will not arise very soon.
Recommended:
Feature Of Pool Repair: PVC Adhesive Tape For Pool Repair In Water, How To Seal It With A Special Tape With Your Own Hands? Repair Kit For Counterflow
Features of the repair of different types of pools: concrete, fiberglass, PVC inflatable. Water-adhesive PVC pool renovation tape. What is included in the repair kit and what is it for? In what cases is it better to contact a specialist? Preventive measures for the safety of swimming pools
How And With What To Glue The Intex Pool? How To Glue A Frame And An Inflatable Pool At Home With Glue Without Patches?
How to diagnose a frame or inflatable pool if water is leaving it? How and with what to seal the intex pool: materials and tools? Step-by-step instructions for fixing. Swimming pool recommendations
How To Glue Plastic To Metal? Waterproof And Other Glue For Gluing Tightly At Home. How To Glue Correctly? Choosing The Best Powerful Adhesive
How can you quickly and easily glue plastic to metal? Waterproof and other glue for firmly gluing plastic and metal at home. What types are there on the market today? How to use this glue correctly?
How To Glue PVC Panels In The Bathroom? How To Glue Plastic Structures, How To Glue It Correctly, How To Glue Sheet Options, How To Glue A Room
How to glue PVC panels in the bathroom yourself? How to glue plastic structures yourself at home? How to properly glue PVC panels in the bathroom with your own hands?
Roofing Material Glue: How To Glue To Concrete And Glue Together? We Glue On The Roof To The Slate And Without Heating, The Choice Of Mastic
When choosing a ready-made glue for roofing material, preference should be given to ready-made domestic compositions. The article will tell you how to glue the roofing material to concrete and glue its sheets together with high quality, what bituminous glue on the roof to glue the roofing material to the slate and without heating, and how best to dilute the thickened adhesive composition