LED Strip With Remote Control: Colored Strips On The Ceiling In The Room, Other Uses. How Do I Open The Battery Operated Remote Control And How Do I Use It?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Nowadays, the ceiling space is designed in a variety of ways within the framework of a variety of design solutions. In accordance with current statistics, very often LED strips with a control panel are used. Thanks to lighting effects, it is possible to maximally emphasize individual elements of the interior, as well as create the necessary atmosphere in the room. It should be noted that such tapes, taking into account their functionality, efficiency and durability, are used not only for home decoration . Such universal LED devices can be seen in salesrooms, shop windows, catering establishments and many other commercial real estate objects.

Peculiarities

In fact, a diode tape of the same color or multi-colored is a flexible strip . Its width can vary from 5 to 50 mm, and its length is 5, 10, 15 or 20 meters (customization is possible). On one side of the tape there are LED resistors, which are connected in a circuit with special conductors. On the opposite surface, as a rule, there is a self-adhesive element. With its help, strips can be easily and quickly installed on the ceiling and any other surface.

It is important to consider that on the LED strip with a control panel, a different number of diodes can be located, the sizes and characteristics of which vary significantly . Often, in order to obtain the most saturated effect and brightness of the lighting, additional rows are soldered.

For those who need RGB (Red, Green, Blue) tape, it is important to remember that such devices are multicolor. Such a tape works due to the fact that in each of its modules there are 3 colored diodes at once.

By changing the brightness of each of the colors, the desired effect is achieved with the dominance of one or another element of the visible spectrum. At the same time, outwardly, the multicolor LED strip and the RGB strip differ from each other in the number of pins. In the second case, there will be 4 of them, three of which correspond to the colors and one common (plus). It should be noted that there are also models with 5 pins . Such tapes are marked LED RGB W , where the last letter stands for White light.

One of the key features and benefits of color systems is the ability to control parameters … Special controllers are responsible for this, which work in tandem with remote controls. In principle, it is possible to control the operation of any LED strip that will be connected to the said device from the remote control. But the delivery set for single-color ribbons does not include controllers and control panels, since this is unprofitable from an economic point of view.

The list of the main advantages of the described devices includes the following important points:

• maximum ease of installation;
• long service life, especially in comparison with conventional incandescent lamps - as a rule, LEDs provide up to 50 thousand hours of continuous operation of tapes;
• compactness and ease of use;
• the ability to implement any design ideas, provided due to the lightness and flexibility of the material, as well as a fairly wide range of lighting effects;
• operational safety.

Of course, there are also certain negative aspects. So, the most significant disadvantages include:

• relatively low moisture resistance, however, this indicator can be significantly improved by purchasing a tape with a silicone shell;
• lack of effective protection against mechanical damage;
• relatively low color rendering index, due to which multicolor ribbons are inferior to white LEDs.

Taking into account all of the above, we can safely say that the highlighted advantages fully compensate for the disadvantages. In this case, the latter can be minimized by adapting certain characteristics to the operating conditions.

Types of remotes

At the moment on sale you can find two types of remote controls - push-button and touch … By the way, with different designs, both of these categories have identical functionality and purpose. Also, devices are divided into types based on the signal used. In this case, we will talk about the features of the operation of the consoles. So, for example, when using infrared options, the controller sensor must be in the field of view.

Radio waves make it possible to control the lighting system even from the next room and at considerable distances (up to 30 m). It is important to remember that all radios operate at a certain frequency, and therefore the loss of the device will lead to a reinstallation of the controller .… Another category of control systems operates on the basis of a Wi-Fi module. In such situations, you can control the backlight using your smartphone.

In terms of nutrition, usually Remote controls operate on different batteries … Another important point is functionality of the device.

According to statistics, sensory models are more popular today.

Push-button

The simplest modifications of control panels with buttons can still be found in various designs . Most often, they look like remote controls for TVs or music centers. In the vast majority of cases, such gadgets have a set of multi-colored keys. Each of them is responsible for activating a specific operating mode of the LED strip. For example, pressing the red button will turn on the corresponding color.

The control itself in such situations is implemented via a radio channel created by infrared radiation. Using the function buttons, the user can adjust the light intensity, turn the ribbon on and off, and control the effects. We are talking, in particular, about the so-called dance of flowers. As practice shows, one of the most popular options is the regulation of the radiation intensity. It allows you to set the required level of glow in the room to create the most comfortable atmosphere.

In this case, there are the following main modes of tape operation:

• maximum brightness;
• night light mode (blue light);
• "Meditation" - green glow.

Remote keypad allows you to adjust the intensity of the glow, flicker and many other parameters … As a rule, the functionality is determined by the model and features of the remote control itself. But it is worth considering that its cost directly depends on the capabilities of the device.

Sensory

Simplicity of design has become one of the main competitive advantages of this category of control devices . So, to change the color, it is enough to touch the special touch ring on the remote control. To activate the mode of smooth transition between colors, you must hold down the corresponding button for 3 seconds. It is important that with extended functionality, touch remote controls have only one button.

The key advantages of such devices include, first of all:

• ease of activation and use;
• the ability to adjust the brightness of the diode glow in the range from 10 to 100 percent;
• complete absence of any sounds during the operation of the gadget.

How to connect a ribbon?

Before making the connection according to the manufacturer's instructions you should decide on the location of the tape … At the same time, at the preparation stage, attention is paid to the installation of boxes and projections, if any are provided for by the project. As already noted, in the overwhelming majority of cases there is a self-adhesive layer. It allows you to quickly fix LED strips on almost any surface.

After the completion of the installation work, they step directly into the connection of the tape. By the way, taking into account the simplicity of execution, such manipulations can be performed with minimal skills and experience.

However, if there is the slightest doubt, it is strongly recommended to entrust the work to specialists.

LED systems include:

• BP;
• controller or sensor;
• Remote control;
• the semiconductor tape itself.

The connection process involves three main stages, namely:

• a wire and a plug are connected to the power supply;
• the controller's contacts are connected to the power supply unit - such a manipulation is relevant if an RGB backlighting system is used;
• contact cables are connected to the controller.

There are situations when a controller is already installed in the room to be equipped (designed), designed for a backlight strip of a certain length. If it needs to be reconfigured to accommodate more LEDs involved, then an amplifier will likely need to be installed. In this case, it will be important to take into account the features of the wiring. The power supply is connected to both the amplifier and one of the ends of the tape. Another element of the backlight system is connected from the opposite side to reduce the load.

When performing all the work stipulated by the instructions it is important to observe the polarity . At the same time, attention should be paid to the correspondence of the voltage of the controller and the power supply to the light elements themselves. Semiconductor strips cannot be connected in series, since this approach to installation leads to overheating and melting of the plastic base.

Most often, LED strips are sold in coils of 5 meters. During the installation and connection process, the excess can be easily disposed of with ordinary scissors. If a longer segment is required, then the strips will be connected using a low power soldering iron.

An alternative option for extending tapes involves the use of special connectors. These miniature devices complete the electrical circuit when they click into place.

When performing work on connecting the considered backlight systems, the following errors are most common

• Connection over 5 meters LED strip in series.
• Using twists instead of connectors and solders.
• Violation of the connection diagram , which provides for a certain location of all involved elements (power supply unit - controller - tape - amplifier - tape).
• Installation of a power supply unit without power reserve (end-to-end) . It is recommended to choose devices that are 20-25% more powerful than required.
• Inclusion of an unnecessarily powerful controller in the circuit … From a technical point of view, there will be no problems, but such an acquisition will be associated with an unjustified overpayment.
• Installation of powerful backlight strips without heat sinks . As a rule, the latter is played by an aluminum profile. If you do not provide heat removal during the operation of the system, the diodes will quickly lose power and fail.

How to use the remote control?

There is nothing difficult in controlling the backlighting, since the user will have to take a minimum of steps to configure the desired mode of operation of the tapes. At the same time, the use of remote controls has a number of important features. The main area of application of the described systems is the design of interiors of various premises. They are also widely used for advertising purposes by those who decide to open a retail outlet or entertainment establishment. But most often, LED strips with remote controls can be found in houses and apartments.

To create a special atmosphere by highlighting the ceiling, cornice and any other part of the interior, it will be enough to install an RGB controller with a remote control. In the overwhelming majority of cases, such systems are equipped with standard consoles.

On them you can see multi-colored buttons that allow you to customize the modes of operation of RGB strips. Each key is responsible for its own color, which greatly simplifies the entire process of controlling the lighting system.

One of the key options of the consoles in question is to change the brightness of the glow . As a rule, adjustment is carried out using the white buttons located in the top row. The left one increases the specified parameter, and the right one decreases it. Manufacturers have taken care of the most comfortable operation of tapes and remote controls. As a result, you can change modes with the movement of one finger. The following options are available.

" Bright lighting " - the main operating mode of the lighting system, in which only white light with maximum brightness is used.

" Night light " - a light blue glow is set at low brightness.

" Meditation " - using the remote control, the green light turns on. The user adjusts its intensity at his own discretion, taking into account, in particular, the musical accompaniment used.

" Romance Mode " - in this case we are talking about a light red background and muted brightness, which will create an appropriate atmosphere. Only three buttons on the remote control (color and brightness) will be used for configuration.

" Dance " - the mode of operation of a multicolor tape, providing for the use of light dynamics. When activated, you can adjust the intensity of the blinking depending on what kind of atmosphere and for what reason you want to create. Naturally, we are not talking about light music.

To summarize, two main points should be highlighted. A controller is required to control any multi-color LED strip … Outwardly, it is a small box that connects to the power supply and is located in a ceiling recess or any other place. The second important element of the backlight system is the remote control . At the moment, even the simplest tapes are equipped with such gadgets.