Slab Tables (85 Photos): Slab And Epoxy Resin Coffee Table Tops, Dining Tables And Desks, Other Options

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

The table is a necessary piece of furniture in every home. Such products can be made from different materials, have different shapes and sizes. Slab tables are an excellent option for making original furniture that will decorate your own home or workplace.

Advantages and disadvantages

The worktop is an important part of kitchen furniture, it is designed to take the brunt of housekeeping. In this regard, it must be resistant to mechanical damage, have high strength, but remain attractive. Wood is a wonderful material capable of embodying the voiced qualities. This applies specifically to natural wood, and not furniture made of chipboard, MDF, veneer.

Slabs are slabs made of wood. Cuts are used in the production of unique and original furniture. Pieces of wood cut horizontally or vertically are suitable for this.

For furniture, a solid saw cut from trees with solid wood and a beautiful cut pattern is often used . Longitudinal cuts highlight the natural beauty of the material. At the same time, boards with beautiful color transitions, as well as with natural defects in the form of knots and wormholes, are preferable.

Synonyms for "slab" can be the words "slices", "cuts", "array " … Although these are similar concepts, experts prefer to use this unfamiliar term. The word "slab" is used more when naming longitudinal logs, and for a cross cut, the term "saw cut" is used. For cuts, the lower part of the trunk is often taken, this allows you to get a thicker slab up to 15 cm. For the production of seats, chairs or tabletops, a cross section can be used. The choice of furniture from a saw cut is not accidental. These products have a lot of advantages, so you should dwell on them in more detail.

The advantages of such products include such moments

• Uniqueness … Any wood used for the production of furniture has a unique structure, so the result is products that are different in their appearance. Even from one trunk it is impossible to cut two identical tabletops.
• Natural beauty . Models made of slab retain all their natural beauty along with knots and cracks. Their presence allows the finished products to look more original and unusual.
• Such products are very popular . Many designers use these materials in the production of furniture to decorate rooms made in a particular style. Such furniture will decorate the room, made in modern style, loft, classic.
• The ability of such furniture to enhance any space . Solid wood products are used in both residential and commercial premises.
• Low price and availability . Although cut furniture is not very cheap, it is quite affordable. In addition, if you wish, you can make it yourself, having the necessary materials and tools.
• Such products are of high quality . It is not for nothing that models made from tree trunks are considered high-quality products.

The slab can act as the base of the product, or as a decoration. The final result of the work will depend on the choice of the material itself, its processing and design. The beauty of products directly depends on the choice of wood, its texture and pattern.

Species overview

The most popular cut pieces of furniture are these

Tables … This can be a small coffee or computer table, a large round convertible kitchen or dining option, a classic slab writing desk, or a small coffee table.

Furniture for offices and offices , negotiation models.

Benches .

Window sills .

Bar racks.

Corner and traditional pedestals under the sink to the bathroom.

Headboards bed .

Lamps, lamps .

Copyright crafts .

Also, original wall reproductions and other design products are made from the slab.

The size of the table can be very different and depend on the size of the room, as well as on the available material that will be prepared for milling and further processing.

What slab is used for manufacturing?

For the manufacture of such furniture, cuts of various trees can be used. When choosing a material for the manufacture of furniture, it is necessary to take into account the characteristics of each of them. Experts recommend working with oak, maple, cedar. Also, good products are obtained from ash, poplar, alder and walnut.

Since ancient times, elm (elm) has been popular in the production of wood products. Its wood has a bright and juicy color, good texture and shine, this material is resistant to moisture. Many craftsmen recommend choosing exactly elm for work, since it is even better than cedar or oak.

Products made from elm are durable, reliable and practical

• Oak is a durable material that is resistant to decay. It has a beautiful noble texture.
• Elm (elm) is a representative of a hard breed, this material is malleable, it is easy to work with it. It also has disadvantages, consisting in a tendency to decay and deformation when drying out.
• Larch they are more durable and resistant to deformation and to the decay process, but they can crack. Based on this, they are not recommended for rooms with frequent temperature changes.
• Birch is a durable and deformation-resistant material, but at high humidity, birch products can begin to rot. This deficiency can be neutralized with the help of antiseptics and special compounds with which the tree is treated.
• From pine trees you can also make furniture. This pliable material in work, soft and light, may deform a little. It is recommended to impregnate the wood well with an antiseptic composition.
• Spruce has a less even texture in comparison with the previous version, there are more knots. In processing, the tree is more capricious, it is less impregnated with an antiseptic.

Aspen is considered a less suitable option. The wood has a less expressive texture and faded color. Due to its softness, it is easy to work with the material, but with mechanical stress, traces remain on the finished product. For outdoor furniture, it is impractical to use fir. This breed does not tolerate high humidity, and will quickly begin to rot.

In order for the finished product to turn out beautiful, of high quality and to be able to serve for a long time, it is necessary to use suitable wood for this. The array must be dry enough . Cloth drying technology is a whole industry in woodworking.

Drying in natural conditions can take a long time, sometimes several years. That is why the production of slabs is impossible without special types of equipment responsible for drying wood.

In production, it is dried in a large autoclave, where the cut is left to dry at a temperature of 180-250 degrees. Drying time can range from several hours to several days. Dried wood after processing changes color, it becomes brighter and more juicy … Often, wood is baked until the color becomes very dark, almost black, while all the properties of the material are preserved.

After drying, the cuts are leveled with a milling machine, then the surface is treated with a grinding belt machine. If there are irregularities or bark around the edges, they are left and not evened out. Such natural curvature will make the finished product more original, emphasizing naturalness, which is important when decorating rooms, for example, in a loft style. After drying and processing, the boards are fixed using legs, for example, made of glass.

Then the slab is processed using a grinder, changing the nozzles with varying degrees of granularity. Usually, work begins by choosing an abrasive with the number 150, then gradually changing the nozzles, moving from numbers 240, 260 to nozzles up to 1000, 1500 or even 3000. Polishing work is carried out at the final stage, for this they use a special polishing paste and a felt disc or foam rubber.

How to do it yourself?

Most often, slabs are created at enterprises with special equipment, or at sawmills. Often, the production of such products is established directly in the forest. For work, they select trunks with a diameter of about a meter. Oak, aspen and birch are used more often, they have a peculiar texture with a beautiful pattern . Elm, poplar, larch, and pine also remain popular. Modern sawmills have special equipment that allows you to make a longitudinal cut. At home, making the right beautiful saw cut without tools is difficult and costly.

If you have good material and equipment, you can make a cut yourself.

The workflow looks like this

• At the initial stage, preparation of the material and its processing . Be sure to make sure the material is dry. The canvas must be processed by removing unnecessary elements and sanding the surface.
• Then produced cutting the blade into cuts . Such work must be carried out with the utmost care and precision.
• Every saw cut is necessary view and make sure it is dry . If necessary, sanding and removal of unnecessary parts is carried out. The optimum thickness for cuts is considered to be 1 cm.
• At this stage, fixing elements with wood glue … Parts are left to dry.
• To facilitate the workflow, install sides … If the table top is rectangular, the sides can be made of plywood. For models of a different shape, a flexible sheet is more suitable. You can fix the sides in any suitable way.
• Necessary prepare epoxy . To give the products an interesting shade, you can use special fillers in the form of bronze powder or soot, cement or chalk.
• Emptiness poured with resin .
• At this stage, grinding products that are made using emery wheels.
• The final stage of the work is varnishing products. Experts recommend in this case to give preference to polyurethane varnish, which has resistance and durability.

These are the basics for making your own table slab. If you wish, you can add or change something, come up with a more unusual and unique design.

Tools and materials

Making slab furniture is impossible without the use of certain tools and materials. A master in the manufacture of such products cannot do without such tools.

• Circular saw … It is advisable to choose a submersible model, the cutting depth of which would be sufficient for sawing the blade without chips per pass.
• Routers and cutters . For milling, a tool with a power of at least 1, 4 kW is more suitable.
• It will be needed in work and Sander . During processing, eccentric and rotary models can be used.

At the final stage, the master cannot do without special products designed for covering and care. These means include tinted oils that will not clog the pores, but will be absorbed into the material itself. Natural oils will perfectly show the natural texture of wood, they can be used to cover and tint products in a variety of shades, and give the material protective properties.

Technology

Tables made of solid wood with epoxy are the most demanded materials for craftsmen engaged in the manufacture of designer furniture, exclusive products. They can be conditionally divided into two categories.

• The first option assumes applying epoxy resin to the base .
• In another version, the base is missing , the integrity of the entire structure depends on the strength of the solidified material.

The technology of the process consists in preparing the material, grinding it, pouring it with epoxy resin and further finishing. An important point is the preparation of the epoxy. The components must be mixed in the proportions indicated in the instructions. This will create a bubble-free layer. Be sure to use clean dishes when kneading. The two-component compound must be mixed thoroughly to achieve a good end result.

When applying epoxy, it is necessary to allow the mass to be evenly distributed over the surface, filling all the irregularities. When greasing the ends, it is advisable to help distribute the mass with a hair dryer or burner.

It is impossible for the epoxy layer to overheat by more than 40 degrees.

Pouring into the box is done very carefully, slowly, avoiding the formation of bubbles. Carefully distribute the mass over the surface. If it is necessary to fill in large volumes, it is better to fill the mass in layers of 1-1.5 cm. After that, the surface is treated with a flame. This will allow the epoxy mass to spread evenly over the surface and lead to the removal of the formed bubbles.

After hardening, the box is disassembled with a scraping knife. And the sidewalls are separated with a spatula and a nail puller. At the final stage, re-milling is carried out, then the tabletop is cleaned of dust, a finishing layer is applied. If desired, you can install the backlight, this will give the finished product more originality, instantly transform it.

Beautiful examples in the interior

Furniture made from slabs of wood has recently become very popular. Such products are used to decorate private homes, various companies, retail outlets, offices.

A massive table with similar wooden shelves will take its rightful place in a cabinet made in a certain style.

An epoxy resin river table with rounded metal legs with chairs is the perfect choice for a country house veranda.

By its appearance, such a tabletop imitates the river bed, which slowly slides through the sand. Dim backlighting from below will allow such furniture to look more interesting, especially in the evening.

A worktop for a kitchen table made of a similar material will take pride of place in a loft-style kitchen.

Slab kitchen set is stylish, reliable and durable.

A stylish rounded table on an original base-leg will be an excellent replacement for office options.

A mini-model with a "decorative lake" in the middle will become a real highlight of the room.

Loft-style designer furniture completely transforms the room in which it is located.

Filling a table or other objects in an interior made of slab and epoxy resin with leaves, shells, flowers or other decor, you can achieve greater uniqueness of products and expressiveness.

The bar counter will be the perfect solution to show the beauty of the tree, its texture.

A slab cabinet in the bathroom looks original and minimalistic.

According to the designers, slab furniture used for interiors should be simple, no frills. The drawing of the tree itself is quite beautiful, so it does not require any addition.