2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
If the doors of a kitchen unit or wardrobe do not close well, you need to take a screwdriver and start an inspection. It is possible to adjust the awnings without special skills, it does not take much time - it is enough to have tools at hand and follow certain rules. Let's dwell on some of the intricacies of this case and consider individual cases, since there are several methods for adjusting canopies.
When is adjustment needed?
Adjusting the hinges, first of all, may be necessary immediately after purchasing the cabinet.
After installing it, you should check the strength of the hinges, whether the doors are evenly fixed, whether they close correctly, and if defects are detected, immediately correct them.
The same procedure is carried out after moving from one place of residence to another. During transportation, deformation of the doors may occur, they may loosen, therefore, after transporting the furniture, it may be necessary to adjust the hinges.
Well, at home, you periodically need to check how well the lockers close, whether the doors are loose: a malfunction of the canopies can be associated with sudden changes in temperature, constant humidity or improper actions during operation.
What is required?
The main tools for adjusting door hinges are a screwdriver and a Phillips screwdriver. Sometimes you may need a plumb line or a level for construction work, with the help of which you have to find out how evenly the structures are exposed.
Distortions may be due to the fact that the cabinet was assembled incorrectly or placed on an uneven surface.
For such cases, a plumb line is needed - it will help the master determine the geometry of the structure and, if necessary, put it on a level. As a rule, after such manipulations, there is no need to adjust the loops, the curvature is eliminated, everything falls into place.
Further work will require an understanding of what to do . First, you need to identify the scale of the problem and decide on the method of adjustment. When inspecting the awnings, a weakened fastening may be found - in this case, we are not talking about adjusting, you just need to tighten the screws more tightly.
It is necessary to consider the place of formation of the gap, estimate the size, radius of displacement and designate the area of the toe . These are the must-have rules to follow before you get down to business. They will help you understand by what method to make the adjustment: in width (when an uneven gap between the canvases is visible), in depth or in height (when one blade is located lower or higher relative to the other).
How to setup?
It is worth starting with the vertical adjustment of the canopy: they find the upper and lower hinges on it, remove the plugs, if any. Then loosen the screws with a screwdriver and fix the cabinet doors to the desired position, raising or lowering them to the desired position.
The bolts are tightened, holding the blade at an optimal level . After the door leaves have been adjusted vertically, they begin to work in depth and horizontally. If you go from the opposite, you still have to return to this sequence, so there is no need to waste time.
To adjust the height of the cabinet doors on the hinges and eliminate the friction of the canvases on the lower slats, it is necessary to loosen the screws set on the two oblong lugs with a screwdriver and make sure that the door is not skewed.
If necessary, raise the front door and tighten the screws: use the screwdriver carefully, feeling the thread so as not to break it.
The hinges are adjusted inward when one of the canvases moves away or the doors diverge in opposite directions . For such work a cross screwdriver is required. Tighten the adjusting screw in relation to yourself until the door is completely aligned: if 2-3 mm is not enough, the action is continued.
In this case, this adjusting screw is turned well, it is pressed in harder than the others, since it supports the main part of the structure. The main thing is to prevent the formation of gaps and gaps between the canvases.
This work requires patience. Perhaps, for the desired result, you will have to try on the sash several times, but this should not annoy you - the experience will come with time.
Regardless of the method, there are general rules that must be followed when adjusting the cabinet door
- Act clearly and consistently - this way you will be able to do everything faster and make fewer mistakes. First, the height adjustment is carried out, and then in relation to other canvases.
- Make sure the structure is level. If there is a bias in geometry, they correct this moment at the beginning in order to understand: you need to work further or the problem has disappeared as a result of the correct installation of the furniture.
- It is worth considering such a moment as excessive clogging of the wardrobe (typical for a wardrobe) - in this case, the gap between the door leaves will increase. But there is a permissible norm - the size of the gap should not be more than 5 millimeters.
- There are cases when you first need to adjust the hinges, and only then start adjusting the doors. In this case, check the facade additive under the cup or reveal it during inspection.
How to care?
In order not to go around constantly with a screwdriver and not only engage in setting up cabinet doors, a number of care measures are recommended
- After collecting and installing furniture structures 2-3 times a year, a preventive tightening of the bolts on the door hinges is carried out. This is the case when the cabinet is used infrequently. With intensive use, for example, of a kitchen set, this is done at least once a month.
- Regularly, it is necessary to inspect the structures for detecting distortions, various defects, departures, and so on. Eliminate all problems in time.
- The adjusting mechanism needs to be lubricated - this way it will work better and longer. For lubrication, take engine oil or another suitable agent. After the procedure, the door must be shaken back and forth (close-open) so that the lubricant penetrates deeper into the device. If you lubricate the hinges at least once a year, the door will not creak or make other noises.
- You can protect the canopy with an oil closer, which completely closes the adjustment mechanism, and under such a cap, the bolts will loosen less.
Metal hinges are quite reliable, with proper operation they can last up to 15 or even more years.
There is one "ailment" in the awnings of kitchen sets, especially cabinets located near gas stoves or hobs . A viscous tar-like substance is deposited on them - a product of gas combustion. From this, the hinges stick, preventing the doors from opening normally. Such places require increased attention, you should clean them as often as possible.
It is possible to maintain the appearance of furniture facades in an attractive form without much work and effort. To cope with the distortions of door structures, it will not take much time, and it will take even less time for inspections and prevention.
Recommended:
Walls For A TV (73 Photos): A TV Cabinet In The Living Room And Bedroom, A Corner Model With A Cabinet And A Niche, Small Options With A Cabinet And A Workplace
Walls under the TV allow you to conveniently place equipment and help to create an original interior. How to choose a TV cabinet for living room and bedroom? Where does a corner model with a wardrobe and a niche look better?
Glossy Wardrobe: Hinged Corner Models With Hinged Doors And A Glossy Facade, Options In Black In The Interior Of The Bedroom And Hallway
The glossy wardrobe will brighten up any interior. What are the materials of glossy coatings, what are their advantages and disadvantages? What is the difference between hinged corner models with swing doors and a glossy facade from sliding structures? How does their capacity and convenience differ?
Doors For A Sanitary Cabinet In The Toilet: A Door For A Cabinet Behind The Toilet, Doors For Shelves On The Wall, 600 X 1900 Mm And Other Sizes
The doors for the sanitary cabinet in the toilet serve as a decorative and protective function for the structure and communications inside. What is the best way to make the door of the cabinet behind the toilet with your own hands? What types of doors are there for shelves on the wall in the toilet?
Cabinet Handle Profile: For Sliding Doors And Swing Doors, 10 And 16 Mm, Other Sizes, For Upper Hinged And Lower Cabinets For Chipboard, Others
Handle profile for swing wardrobes, for sliding wardrobes, what is it? Models 10 and 16 mm, what other sizes can such furniture fittings have? Profile handle manufacturers, what is the difference between the products of each individual brand?
Tool Cabinet: Drawings And Diagrams Of A Tool Cabinet For Storage With Your Own Hands, We Make A Wall-mounted Wooden Cabinet In An Apartment
To organize work equipment in the garage or in the country, you need a cabinet for tools. How to draw up blueprints and diagrams of a storage tool cabinet? How to make it yourself? What is the system for assembling and arranging the instruments?