Panel From Wood Cuts (20 Photos): How To Make A Panel From Wooden Saw Cuts And Timber With Your Own Hands On The Wall?

Table of contents:

Video: Panel From Wood Cuts (20 Photos): How To Make A Panel From Wooden Saw Cuts And Timber With Your Own Hands On The Wall?

Video: Panel From Wood Cuts (20 Photos): How To Make A Panel From Wooden Saw Cuts And Timber With Your Own Hands On The Wall?
Video: How to Make a DIY Word Light Sign Out of Wood - FULL TUTORIAL - Thrift Diving 2024, March
Panel From Wood Cuts (20 Photos): How To Make A Panel From Wooden Saw Cuts And Timber With Your Own Hands On The Wall?
Panel From Wood Cuts (20 Photos): How To Make A Panel From Wooden Saw Cuts And Timber With Your Own Hands On The Wall?
Anonim

Panel from wooden cuts fits perfectly into the interior, decorated in country or scandi styles. This design looks quite original and enhances the feeling of home comfort. Making it is not at all difficult even with your own hands.

Image
Image
Image
Image
Image
Image
Image
Image

What is required?

To create a panel from cuts, you must initially choose the right tree … In principle, any varieties are suitable for work, including soft rocks, since no mechanical effect will be exerted on the product.

but it is extremely important to pre-treat the material with antiseptic solutions to prevent the appearance of rot … In the case when the cuts are made independently, it is recommended to boil the workpiece for about an hour in a concentrated salt solution, and then you can clean them from the skin. To dry completely, the wooden pieces must first stay at room temperature for a couple of weeks, and then in a warm oven.

Image
Image
Image
Image
Image
Image

Finished cuts, if necessary, are sanded and treated with a special antibacterial impregnation.

As for the breed, it will be interesting to look at a pine covered with dark bold lines, or cedar with a lighter shade. Bright larch will perfectly revive the monochrome interior, and the yellowish aspen fits perfectly into the interior, decorated in warm pastel colors. Apple cuts They are distinguished by an unusual pattern with a dark core and a light border. Pear it lends itself well to processing, and therefore is often used for a budget imitation of mahogany. Other suitable wood types include linden, walnut and juniper.

Image
Image
Image
Image
Image
Image

It is important to remember that in cases where the room does not differ in size and good lighting, it is necessary to use cuts of light rocks of medium or small size.

As a basis for a panel made of cuts, it is perfect plywood board … However, you can also use any flat workpiece, from a sturdy box lid to a lined picture frame. It is most convenient to fix individual elements with a hot gun.

Image
Image

Manufacturing technology

It is quite simple to make a panel on a wall from wood cuts with your own hands

The pieces of wood should not be too thick . For rounds of large diameter, you can leave a thickness of 10 to 15 millimeters, and the thickness of small pieces is allowed to be made even less - up to 1 centimeter. It is better to saw cuts with a hacksaw for metal or a jigsaw. If a chain saw is selected for work, then the workpieces will need to be sanded afterwards. The bark is removed when it looks too rough, or does not fit into the interior of the room.

Image
Image

A frame for a wooden panel can be made from a bar … It is recommended to select for this purpose other breeds that will create a contrast in comparison with the composition itself. Needed immediately prepare fasteners for the base of the design. For example, if it is hung in a bathhouse, and therefore fixed on a wooden wall, ordinary self-tapping screws will do. For concrete and brick, it is better to use an anchor.

Image
Image

The work begins with the fact that the composition of cuts is made on any flat surface to create a specific pattern and transitions. When using a large number of elements, it is recommended to mark the order on the back of the cuts. It should also be added that at this point workpieces should be treated with linseed oil, and after drying - with varnish . Each saw cut is fixed to the base with hot glue. For a better adhesion, it is recommended to pre-grind one side of it. The composition can be supplemented with unusual driftwood, twigs or other natural elements. The decision to apply a pattern to the surface with the help of grated stone chips looks very unusual. The gaps between the individual parts are either painted over or varnished.

Image
Image

Beautiful examples

By picking up cuts of different shapes and sizes and cleaning them from rough bark, you can make laconic rectangular panel . As a basis, an ordinary plywood board of a rather large size is used, which makes it possible to decorate the entire dining area with this decorative element. Separate cuts are located in such a way that the large ones seem to create accent points, and the small ones fill in the gaps between them.

Image
Image

In a country house, if space permits, in the form of a panel made of saw cuts, you can arrange a whole wall . The composition is limited by a frame of varnished branches, and at the very bottom there is even a place for rosettes. An interesting design solution is the illumination of the panel, the bulbs of which are hidden behind the spreading branches.

Image
Image

Looks very original combining saw cuts with other natural materials . Branches and large cones are also used to decorate such a composition. The cuts themselves are located not only on the front, but also on the side. In addition, they are cut into separate triangles. All options for natural decor are fixed in layers, usually running horizontally or vertically. The finished work is framed in an artificially aged frame.

Image
Image

Of course, it is worth mentioning the possibility of making wooden panel not only rectangular, but also round … To design such a composition, you will need to select blanks of more or less the same size - at least equal rounds should be used for the edge of the circle. An interesting solution would be to additionally circle with a marker or ink the natural patterns located on the surface of the cuts.

Image
Image

Finally, it is worth recalling that even from the cuts it turns out to create simplified drawings . Alternatively, the panel can be a kind of landscape of several trees. Crowns in this case are collected from wooden circles, and thin branches are used as trunks. A rough frame of a dark shade is used to frame the work.

Recommended: