Do-it-yourself Air Cleaning: Homemade Sink From CDs. How To Make A Filter? Manufacturing Features

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

In a city apartment, dust control is an important task for housewives. It appears in dry air, which adversely affects the health of indoor people and pets. In addition, furniture and musical instruments also suffer from excessive dryness. Therefore, air sinks appear in rooms more and more often.

How to humidify the air in the house?

In winter, heating systems in houses and apartments start operating at full capacity. During this period, cold air, heating to a certain level, loses moisture and becomes very dry. This can be considered a real problem, since the humidity rate ranges from 40 to 60 percent, and deviations from these limits can threaten with not very pleasant consequences … This is especially true for rooms where small children live. The fact is that their immunity is not yet fully formed, respectively, dry and unpurified air causes a number of health problems.

Important! If the air in the room is too dry, it is necessary to constantly evaporate the water there. The most convenient way to do this is with devices specially designed for humidification. You can not only buy an air wash in a store, but also do it yourself.

Folk ways

So, the main task of air washing is to ensure a comfortable level of humidity. However, in some cases, you can still use other methods. In this situation, the main thing is not to overdo it, because an excessively damp room is also not the best option, so the use of all methods at once is not recommended.

• After water procedures, the door to the bathroom should be left open whenever possible. And also there is no need to rush to drain hot water from the bathroom, evaporation will increase the humidity in the room.
• Many people prefer to hang things after washing on the balcony or loggia. However, if possible, it is better to do this inside the apartment. Items can be hung directly on the batteries, if their characteristics allow it.
• A great way to humidify the air is to evaporate the water. For this, any suitable container is placed on the stove in which liquid can be boiled. After boiling, the container is removed on the table, and the vapors continue to fill the room.
• You can simply leave the pan on a low heat for a long time, which will ensure that the liquid evaporates. This procedure can be done all the time while cooking. It does not hurt to add a little eucalyptus or tea tree oil to the water, they have a beneficial effect on the body, contribute to an overall improvement in well-being, prevent the spread of viruses and infections, and also fill the room with a pleasant aroma. You can also add cinnamon sticks or other aromatic spices.

Important! There is often controversy about adding essential oils to a moisturizer. Experts say that this action will not cause any harm.

However, the device will need to be thoroughly rinsed after each use

• Another way is to place containers with water throughout the apartment. You can use any container: both ordinary basins and beautifully designed vases. It is best to place them near heaters, so the evaporation process will go more actively. It should be borne in mind that contamination will gradually accumulate in containers, so they will need to be washed regularly and the water changed.
• Houseplants are no doubt not only beautiful but also provide tangible benefits. The microclimate of the room is significantly improved. With their help, not only the air is humidified, but also disinfected and cleaned. Among plants, such as nephrolepis, ficus, hibiscus, and so on are especially popular.
• It is useful to install aquariums in the apartment. If you don't want to look after the fish, you can get by with ordinary indoor fountains. Despite the fact that they are decorative elements, the amount of moisture is sufficient for the air to be optimally humidified. In addition, experts believe that these devices have a positive effect on the nervous system, relax and calm down.

Important! The apartment must be regularly ventilated. Optimally 2-3 times daily. Wet cleaning will save you from dust, it must be done constantly.

Materials and manufacturing

If you want to facilitate the task of humidifying the air, making a homemade sink will not be difficult. Besides, you can purchase the desired device in the store, on the shelves of which they are presented in a wide range … However, in this case, you need to be ready to spend a decent amount, since there are no particularly budget options yet. Home making will not be too expensive, since most of the materials at hand will be used in the work.

A device made of plastic containers and a fan

The simplest humidifier can be made from a polyethylene container with a volume of 5–6 liters. You will also need a computer fan, wire, phone charger, a sharp knife, a soldering iron, a marker and microfiber napkins that will absorb moisture. If you have all of the above parts, you can make an air sink with your own hands.

The manufacturing process includes several steps

1. On the side of the container, it is necessary to mark the places where the cooler will be mounted. You will need a knife to cut a hole for the fan. And also it is worth making notes for the slots for humidified air and recesses for napkins. According to these marks, the necessary holes are burned out with a soldering iron. It should be noted that it is better to carry out work in the open air, since toxic vapors will be released from the contact of the container with heating elements, which can significantly harm health.
2. A loop is made on the wire, after which the fan is fixed with its help. After that, it is threaded through the holes at the bottom, through the fasteners and bent as needed. A cooler is attached, along with a power supply.
3. Next, you need to prepare napkins. On them on the sides you need to make small holes for ventilation. The container is filled up to the middle with water, after which napkins are placed there. This liquid level must be constant, if necessary, it is topped up. For the best possible functioning of the device, the water should be changed daily, and the container and napkins should be rinsed.

It should be noted that it is the napkins that increase the amount of evaporated moisture. However, if desired, the device can be made without using them.

And also in the case when dust settles on the inserts, air washing also plays the role of a purifier. For better cleaning, you can place a charcoal filter in the cloth.

CD device

Another popular option is to create a humidifier from CDs. The main condition in this case is that the width of the surface from which moisture evaporates will depend on the number of elements . And also the advantage is that the dust abundantly settles on the discs, after which it is washed off into the pan with water, respectively, the air becomes cleaner. If desired, you can add a few drops of essential oil to create a scent, but the sink will need to be rinsed thoroughly after use.

To create such a device, 50–80 disks are required . The exact amount will depend on the size of the water tank. A plastic or metal axle will serve for mounting discs, and a regular threaded stud with a diameter of 10 millimeters will do. You will need a supply of plastic washers, 2 bearings and nuts. After all the materials are prepared, you can start creating the device.

There are several steps to follow

1. Remove the top shiny layer from the discs. This is done with ordinary sandpaper or a grinding wheel. The surface will then become porous, it will easily get wet from water, and will not repel dust.
2. Then the discs are put on the stud, and the gaps between them are provided by the washers. Fastening at the ends of the axle is done with nuts.
3. If a plastic tube is used, the discs can be secured with a glue gun or a plastic washer. The bearings are fixed along the edges of the axle, from one of which a pulley is organized, made of 3 CDs, among them the lateral ones are slightly larger than the average. A thin rubber band is put on it, a bank one is quite suitable.
4. In this case, it should be noted that the axis must be larger in size than the container in which it will be located. This is to ensure that the bearings remain outside the device. The pulley is fixed against the motor, which will ensure reliable fixation of the belt, which will not slip. And also it will not be superfluous to fix the computer fan.