How To Install A Floor-standing Air Conditioner? DIY Installation Rules In An Apartment. How To Properly Lead The Pipe Through A Plastic Window?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

A modern, well-installed air conditioner not only maintains optimal temperature parameters in the room, but also regulates the humidity and purity of the air, cleaning it from unwanted particles and dust. Floor-standing, mobile models are attractive in that they can be placed anywhere, in addition, they are quite simple to install on their own, without resorting to the services of specialists.

Which air conditioner can I install myself?

Range of modern climatic equipment includes 2 types of devices - split systems and monoblock air conditioners . The principle of their work is the same and consists in transferring excess heat from the airspace of the house to the street. Wherein air circulation occurs due to the operation of a fan unit equipped with an electric motor.

A certain amount of air mass moves through a heat exchanger, which is part of a closed circuit with refrigerant - freon, and works according to the evaporator scheme. The heated air, passing through the pipes, is cooled, blown by a fan, and then the heat is removed from the apartment through an air duct.

The main difference between these types of equipment is that in a monoblock the fan is located directly in the case, and in a split system - in a separate, outdoor unit . However, in both cases, to remove heat, you need access to the street, so there is a need to remove the air duct and drainage pipes outside the apartment.

Anyway it is easier to install the floor air conditioner yourself , after all, all work, not counting the output of the pipe, is reduced to connecting the unit to the power supply.

There is no need to engage in the installation of an outdoor unit, which has its own subtleties and difficulties and should be entrusted to professional craftsmen.

Installation rules in the apartment

When installing the air conditioner with your own hands, despite the fact that it is a relatively simple workflow, it is important to study the general requirements for its implementation in a residential area:

• the first important rule concerns the location of the unit - it is allowed to be located 50 cm from any interior items, in addition, unhindered access should be left to the unit;
• the connection should be made only to a grounded outlet without the use of an extension cord or special adapter;
• equipment must not be grounded using heating pipes or gas mains;
• you can not place the floor structure outside the dwelling, including the bathroom;
• when the panel of the indoor unit and the protective grill are removed, the air conditioner cannot be turned on;
• It is not recommended to install a fuse on the grounding cable or to bring it to the neutral position - this may cause a short circuit.

Of course, it is easier to install mobile equipment, but only if the technical conditions are met, you can achieve its uninterrupted operation and eliminate malfunctions.

Features of the installation of a mobile system

The installation does not require prior approval from the communication services, so it can be carried out even in rented housing . In addition to connecting the portable air conditioner to the electrical network, it will be necessary to bring the air duct pipe outside. This can be done in several ways - through an ajar door, through a wall, a transom, or lead a pipe through a plastic window.

The last method is the most convenient and less expensive. If a set consisting of an insert for a window, a special clamping ring and glue is not included in the kit with the structure, then you will have to prepare plexiglass, adhesive masking tape, scissors for hard materials, an awl, an electric mixer, metal corners for work.

It is also worth thinking about where to mount the equipment. The area near the window is best suited for this. The most important thing is that there are no objects and things near the device that impede normal circulation, and the air duct pipe, if possible, does not have significant bends.

Installation of a floor-standing air conditioner

Perhaps the most difficult thing in the process of installing a floor-standing air conditioner is this is the installation of the window insert , after all, it is important not only to ensure high-quality output of warm air, but also to preserve the aesthetic appearance of the glass unit. In some cases, you have to make an insert on the glass with your own hands. Let's figure out how this part is installed correctly.

This can be done by adhering to the following algorithm

• You can use a mosquito net for plastic windows. You need to remove it, insert the thermoplastic, remove the seal.
• You will need to make measurements of the window opening and the diameter of the duct hose.
• With an awl, markings are applied to organic glass, the result should be an insert in the shape of a rectangle. The cutting is done on both sides, after which the sheet can be broken off and the sections can be sanded with emery.
• A round contour for a pipe with an air duct is cut in the same way. It is best to do this with a universal electric blower. The inner sections of the cuts are carefully cleaned.
• For better adhesion to the frame, the sheet must be roughened with a coarse sandpaper. After that, it should be wiped with a degreaser and dried.
• You can glue on silicone sealant for exterior decoration. Having applied plexiglass, it should be pressed firmly and a suitable press should be put on it.
• After drying, you need to remove the mesh and rubber, carefully inserting it into place, while it is advisable to replace the plastic handles with new, more reliable ones. This is necessary because the structure has a more impressive weight.
• Having installed the structure on the frame, it is better to fix it with corners, then the air duct is connected.

For best sealing it is wiser to use self-adhesive rubber seals , because the insert will become the only barrier that protects from wind and precipitation outside the windows of the home. It is important that the window is fixed open during installation.

The final stage:

• insert the drainage tube into the corrugation of the air duct;
• connect it to the exhaust outlet of the climatic equipment installed in a suitable place;
• connect the system to the mains.

Before switching on the floor-standing air conditioner, it is important that it stands in its normal, upright (working) condition for about 2-3 hours … In addition, experts recommend, when installing a floor structure, create additional wiring with a separate automatic switch for the shield, a copper wire with a cross section of 1.5 square meters and a grounded outlet located next to the equipment location. This will help prevent such troubles as short circuits, significant overloads and even the risk of fire.

Thus, with consistent and competent installation work at home, an outdoor air conditioning system is connected . Of course, it is always better if the owner has certain construction skills that will help to cope with the installation better and faster.

Installation of a mobile window air conditioner is presented below.