2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
Modern TV models differ markedly from their predecessors. In addition to improving the picture quality and signal reception, the body of the devices has undergone significant changes. Previously, the filling of the TV was rather cumbersome, therefore, to install it, a special cabinet was needed, which had to be moved 20 cm away from the wall. Today's flat-shaped TVs are increasingly being mounted on a wall or ceiling. This installation method helps to get rid of the clutter of unnecessary furniture. And the design of the brackets allows you to turn the TV exactly as it is convenient for users.
Training
The process of attaching the bracket to the wall and installing the TV on it is described in detail in the instructions for the mounting device. In the event of repairs, moving, breakdowns or buying a new TV, it becomes necessary to remove this household device from the bracket. Before that, you should perform a series of steps that will greatly simplify the whole process.
- Prepare the required tool . Most often, the holder plate is attached to the body of the TV receiver with 4 screws, so you only need a Phillips screwdriver to remove the TV.
- And also you need to prepare in advance a place where you can put the TV removed from the holder . To do this, a soft cloth should be spread on the floor or table area, taking into account its size, so that later it would be enough to completely cover the device. This will protect your device's screen from scratches and damage.
After the preparatory measures, you can proceed directly to the dismantling process itself.
Dismantling
Detaching the TV from the bracket will not be difficult. Anyone who knows how to hold a screwdriver can do this job. The TV will be removed from the wall mount by following the steps below in sequence.
- Turn off the working TV.
- Disconnect the unit from the power supply.
- Remove the plug that connects the device to the antenna.
- Disconnect other existing wires and additional devices (players, speakers, set-top boxes).
- Pull the wall mount bar forward as far as possible to access the rear panel.
- Find a rectangular strip with 4 screws on the back of the TV.
- Unscrew each fixing bolt in turn with a screwdriver.
- Hold the TV underneath and lift it up slightly to remove it from the mounts. It is more convenient to do this work together, especially in cases of oversized equipment.
- Hold the device and place it in a prepared place.
This completes the dismantling of the LCD panel from the bracket. If there is a need to remove the bracket, then for this you will need to unscrew 4 more self-tapping screws that attach it to the wall.
Precautions
Plasma or LCD panels placed on a wall usually have a wide diagonal. Therefore, the weight of such a television device will be quite high. In addition, the device is connected to a voltage source of 220 V. Therefore, when disassembling, all precautions must be taken. Before starting manipulations, you must:
- make sure the TV is de-energized - this will help to avoid electric shock;
- make sure that all existing wires are removed from their respective sockets , located on the back or side panel, otherwise the connector or connecting wire may be damaged by sudden movement;
- Before removing the TV from the bracket, you need to make sure that it can be carried alone , otherwise, you will need an assistant - this will protect the device from possible damage to the case or screen during transfer.
After removing the TV, you need to protect the screen from scratches and other mechanical damage. Do not leave the panel on the floor, place it on a window sill or narrow shelf.
The nuisance of pet claws should also be avoided . Small children should also not have access to the device. They can scratch the screen with a pencil or other sharp object.
Tips & Tricks
The TV, securely attached to the wall, is protected from being dropped by someone's negligence, and is also protected from damage by children or animals. But if there is a need to temporarily remove the TV panel from the wall, you need to try to put it back in place as soon as possible. If this is not possible, the best way to store the removed device would be to find it in its original packaging. If the packaging has not been preserved, then a protective film must be glued to the screen, and the entire body must be wrapped in a soft cloth.
Removing the TV with the bracket will leave visible holes on the wall. If it is no longer planned to install the fastening in this place, it is recommended to fill these holes with mortar and then carry out the planned wall decoration.
Recommended:
Wall Mountable Folding Tables: Wall Mount Table, Bracket And Wall Mechanism Features, Popular Models From Ikea
Wall-mounted folding tables are a functional option for home furniture. How to choose a wall mount table? What should you pay attention to? What materials are they made of? What premises are they used for?
Dismantling The Split System: How To Remove The Indoor And Outdoor Unit Of The Air Conditioner While Preserving Freon? How To Properly Remove The Air Conditioner From The Wall For Wallpapering And During Repairs?
Dismantling the split system: how to remove the indoor and outdoor units of the air conditioner while preserving freon? Step-by-step instructions, proven professional advice
Do-it-yourself TV Bracket (38 Photos): How To Make A Wall Mount? DIY Wall Mount Drawings
Is it realistic to make a TV bracket with your own hands? How and from what to independently make a mount for a TV receiver on the wall? About this in our article
Sony Lenses: E-mount And A-mount, Sony FE And Alpha, E Mount 18-135 Mm And Other Models
How are modern Sony lenses different? What models are included in the E-mount and A-mount lines? What models are available for Sony FE and Alpha, E-mount 18-135 mm and other models? How do you pick a good option? What kind of feedback do customers leave?
How To Remove Paint From A Concrete Wall? How To Remove And How To Remove An Old Oil Coating, Removal Of Paint And Varnish Material, How To Quickly Clean The Surface
For most people, removing old paint from concrete walls seems like a daunting task, but it is not. How can paint be removed from a concrete wall? What tools should you use? How to remove and how to remove the old oil coating?