2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
Televisions have evolved from huge boxes to ultra-thin models with the designer name “sheet of glass”. If the technique of the past could be put on a table or a curbstone without any support, then modern products, with their fragile sophisticated form, need support. Manufacturers of equipment from different companies independently develop stands for their devices, and today they are produced as many as the TVs themselves. The article will focus on desktop support options for modern television technology.
Pros and cons
Flat-panel TVs come in a wide variety of screen sizes, and for many of them you have to order tables.
But the advantage of modern electronics is its relatively low weight, which allows even impressive models to be installed, for example, on glass stands.
The most convenient devices for supporting TVs today are recognized stands on brackets, since they have a lot of undeniable advantages:
- brackets securely fix the electronics on the table, it cannot be moved and broken;
- their big plus is lightness, compactness but at the same time strength and reliability;
- coasters do not spoil the surface of the furniture , since they are most often fixed to the tabletop using clamps (clamps);
- table stand with brackets allows you to install the TV at any angle convenient for viewing;
- she is so invisible , which does not interfere with the correct introduction of electronics into the interior;
- deliver special comfort rotary stands with rotary functions , with their help, the TV can be deployed to any part of the room;
- often the stand has cable channel for the convenience of laying the wire;
- price of such products is available to everyone.
The disadvantages of desktop designs are not so significant, but they are still available:
- you can install the stands only near power outlets;
- miniature brackets hide well behind the TV screen , but the wires most often spoil the aesthetics, for them you have to come up with camouflage boxes;
- over time, the elements of the stand under the load of the TV can bend .
Views
All table stands can be roughly divided into two types:
- decorative, decorating not only the table, but also participating in the creation of the design of the room;
- stands with brackets.
To make it easier to understand the difference, we will describe each species separately and give examples.
Decorative
Whatever material the products are made from, they look great. Glass creates the effect of the TV floating in the air. Metal emphasizes the modern spirit of the interior. Wood brings warmth and comfort to the environment.
Combined products can be flexibly integrated into any design.
Decorative stands are most often made fixed, being located on them, the TV is unable to change its position . But sometimes the manufacturer installs a rotating circle under the platform, then the electronics can rotate around its axis. This device is convenient for large rooms with a central location of the TV, when the screen can be turned to the viewer in any direction.
Glass
These stands are made of heavy-duty tempered glass and can withstand TVs with the weight indicated in the instructions with confidence. Products most often have a black, matte or transparent surface. The designs are equipped with small chrome legs or have a flat base. They often consist of one or more shelves. A wide variety of glass coasters can be seen in the examples.
Bunk stand with chrome legs
The simplest example of a glass table stand. It is used when they do not want to focus on a similar piece of furniture, or when it is necessary to add airiness and light to the interior
An elegant piece with black glass and chrome details
A small plasma display stand with three transparent shelves and a mesh rack
Minimalist curved black glass stand
Three-tiered model made of glass and metal
Unusual TV stand made entirely of glass
Metallic
Aluminum and steel are most often used to create products with brackets. But they can also turn out to be open elegant shelves for electronics.
- Table stand under a metal TV with stationery accessories. A compact, useful and versatile piece of furniture.
- Aluminum stand Fellowes Smart Suites.
- White openwork decorative product made of metal.
Wooden
Wood stands are quite beautiful and fit into many interior styles:
stand-organizer made of natural bamboo
simple laconic solid wood product
environmentally friendly rack made of natural material
TV model with drawers
multifunctional wood stand
decorative TV shelf, beautiful and practical
smooth curved lines will suit the interior in the modern style
beautiful wave from bent wood
Stands with brackets
The second, even more numerous, group includes stands with brackets. They are made from durable metal that can support the weight of even the largest plasma product . Holders in the interior are invisible, as they hide behind the TV screen. They do not focus on themselves, leaving beautiful modern technology to play a dominant role.
But the big advantage of brackets is that they can "feed" the display at the angle desired by the viewer, raise it to the required height, and rotate it in the chosen direction.
Some tabletop products, with a slight transformation, turn into wall-mounted ones - this expands the possibilities of using the structures. All products on brackets can be fixed or movable, which, in turn, are divided into several types.
Fixed
The product is a stable platform with a stand on which the frame is located with a minimum number of brackets. They fix the TV tightly to the frame.
Such a device does not allow the technician to make any movements without the participation of the platform - that is, the TV can be turned only with the stand.
Movable
Further we will talk about movable brackets, they are more expensive, but there is more demand for them, since the mounts make it possible to install the TV in an optimal position for the viewer.
Movable mounts are of different types
Inclined . Models can change the angle of inclination. They are simpler than pan / tilt but can handle heavy loads such as 70-inch TVs.
Swivel-tilt … The swing-arm stand is the most popular because it offers more options. With this model, the TV can be positioned ideally in relation to the viewer, choosing a convenient angle of inclination and turning the screen up to 180 degrees. Such mobility makes it possible, if necessary, to quickly change the position of the display and direct it to the other side. Swivel-tilt brackets make it possible to install the TV in the corner area.
You can choose brackets that can independently change the location of the electronics under the control of the remote control. But the cost of such products will be high. The disadvantages of the tilt-and-turn design are the weight limit of the TV and the inability to move the stand close to the wall.
Swing-out … Such stands have the maximum level of freedom, which makes it possible to adjust the location of the TV at the discretion of the owner. The swivel bracket has a retractable design that allows you not only to twist and tilt the display, but also to move it in different directions. The device, for example, will help turn the screen in the opposite direction from the window, thereby stopping the glare from entering.
The disadvantage of such a stand is electronics size limitation - TV displays that the sliding structure can support must not exceed 40 inches.
How to choose?
Going to buy a tabletop TV stand, you need to have a clear idea of the type of model: it will be a spectacular decorative item that supports the overall design of the room, or a convenient functional design on brackets.
When choosing a decorative stand, you should pay attention to a number of criteria
- The shape, color and material must match the style of the room . To do this, it should be remembered that metal is suitable for high-tech, loft, minimalism; glass - fusion; plastic - modern interiors; the tree is universal.
- Can choose stationary or rotating version .
- If there are small children in the house, it is better to prefer stand with clip . Rigid fixation will protect the equipment from falling.
- For a TV that is installed on a desktop, it is advisable to pay attention to stand with shelves for office supplies or computer supplies, organizer stand . Such a choice will increase the functionality of the table and help to tidy up the little things.
- There are stands with channels and special fasteners for wires . Such options significantly improve the appearance of countertops containing appliances.
- The most important selection criterion is stability, reliability and compliance with the weight of the electronic device . You should ask the seller about the load that the stand is capable of taking, comparing it with the weight of your TV.
When it comes to choosing a table stand with brackets, you should also take into account certain nuances
- It is better to prefer the swing-out or swing-out version … This will move the screen in the desired direction. But keep in mind the limitations - the display diagonal should not exceed 40 inches.
- If the TV is fixed in one position, don't overpay - you can get the simplest fixed brackets .
- Those who love comfort and are willing to pay for it should pay attention on the model of self-adjusting fasteners on the control panel .
- Necessarily needed check the mounting capabilities with the weight of your TV .
- Do not purchase holders with plastic elements .
- On the market of technology you can find a lot of fakes and the coasters are no exception. But they will have to keep the expensive electronics. It is better to choose products from trusted brands. Or ask the seller for a safety certificate: if the bracket meets modern requirements, it will be TUV marked.
When choosing a TV stand, remember that the presentation of the technique to the viewer is very important . An inconveniently positioned screen can make it impossible to enjoy watching your favorite movie. And yet, the stand must be 100% reliable, especially if small children live in the house.
Recommended:
TV Stands (79 Photos): Modern Glass And Plasterboard Models, Universal And Angular, On The Table And Floor, Swivel And Others
How to choose the right TV stands - what to look for? What should modern glass and plasterboard, universal and corner TV stands look like?
Floor TV Stands: Mobile Stands On Wheels And Modern Glass Floor Stands, Swivel And Other Models
What are TV floor stands? What functions can they perform? What materials do manufacturers use to create them? What to consider when choosing a TV cabinet or stand? Does the interior style of the room influence the choice of design?
Ceiling Brackets For TVs (28 Photos): Swivel And Retractable Ceiling Mounts. How To Hang A TV On A Bracket?
What are TV ceiling mounts? In addition to pivoting and retractable ceiling mounts, what are the different types of ceiling mounts? What should be considered when choosing this or that option, how to hang the bracket?
Stands For Studio Monitors: Table Stands, Floor Stands And Others. How To Choose A Speaker Stand? Tips & Tricks
Key features of studio monitor stands. Their varieties: wall, floor and table stands. Prices, quality and other points to pay attention to when choosing racks
Swivel Vise: Steel Articulated Swivel, Swivel In Two Planes, Swivel And With A Three-swivel Base
What is a swivel vise? What is the difference between steel pivot and rotary vise in two planes? Which manufacturers' products can you trust and what subtleties should you pay attention to when choosing?