How Do I Clean My TV Remote? How To Wash The Inside? Proper Cleaning Of The Remote Control At Home. How Can I Clean My Contacts?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Proper cleaning of your remote control at home will keep this TV accessory in good working order for a long time. But few people know how to do it correctly. Recommendations on how to clean the remote control from the TV, how to wash it inside and process it in the contact area, will help to cope with the task without damaging the electrical appliance.

Why do you need cleaning?

Regular cleaning of the surface of the remote control - necessary security measure … The TV control panel contacts the hands of all households every day. Sweat traces, dust, animal hair, and other pollution settle on it. Under certain conditions, bacterial microflora can penetrate into the housing, damage contacts, and provoke oxidation processes. The more dirt accumulates inside, the more often the "sticking" of the buttons occurs, the signals do not pass. If the batteries are untimely replaced, their contents can also leak out, contaminating the internal space of the remote control.

The remote control is not the cleanest item in the interior of a house or apartment .… If there are small children in the house, contact with the accumulation of bacteria on the surface of the remote control can be extremely dangerous for them. It will become a "time bomb" for allergy sufferers or people with reduced immune defenses.

In addition, improper care can lead to the fact that the remote control will simply fail. In the case of older models, it will not be easy to buy a replacement.

Choice of funds

The most commonly used home remedy for cleaning the remote control is alcohol. The higher their strength, the better. Vodka will work, but rubbing alcohol is best. Perfume and cosmetic compositions should not be chosen for such purposes because of the oil impurities they contain. If there are several remotes in the house, you can visit the department of radio goods and buy a special liquid for cleaning contacts.

The inner surfaces of the console, the board cannot be treated with water-based products … Condensation that collects and direct contact with moisture will oxidize the contacts. The surface of the buttons can be free from contamination with abrasives or acid-based compounds. Cleaning can be done with a toothbrush. As a composition for processing, suitable tons of toothpaste, natural vinegar, citric acid . The composition is collected on the surface of the bristle, the buttons are rubbed with it, then the excess is erased with a swab or napkin.

How to clean the outside?

Cleaning the TV remote control at home is not complete without external treatment of its surface. Perform work after removing the batteries from the battery compartment . After that, you can prepare the necessary cleaning kit: you will need a toothpick, cotton swab or sticks, alcohol composition. Cotton cosmetic pads that can be moistened are also suitable. in with pirte.

Mechanical processing is performed first … With the help of a toothpick, grooves, corners, joints are cleaned. After that, with an alcohol solution, all surfaces are treated several times until the cotton swab remains clean. There is no need to try to carry out the treatment using wet wipes for household or cosmetic purposes, a cloth moistened with water.

If water enters the case, it can oxidize the board contacts.

Ready-made compositions for cleaning consumer electronics are available. Among the most popular are the following.

1. PARITY . The kit comes in the form of a spray bottle and microfiber cloth. The composition is intended for use as a cleaning agent for a computer keyboard, but it can also be used for caring for a remote control. The ingredients contain degreasing, stain-removing agents.
2. Deluxe Digital set clean . Another cleaning kit that dissolves grease and dirt quickly. The composition is also well suited for removing stains on light-colored panels.
3. WD-40 . Classic mixture for cleaning contacts. It is used for deep degreasing, removing traces of dirt, carbon deposits. The contact ability of the electrical board after such a withdrawal will be fully restored. Spray release for ease of application.

How to clean the inside?

Correctly wash the inner surface of the case, you can clean the contacts only after dismantling the back cover. The procedure will be as follows.

1. Open the battery compartment. Remove the batteries.
2. There should be a fastening screw inside the compartment. It needs to be unscrewed, then the same is done with the rest of the fixing elements.
3. After removing all the screws, you need to separate the parts of the console. If the lid does not lend itself well, you can pry it off with a thin knife blade or the end of a screwdriver.
4. Separate the top of the case, take out the elastic insert with buttons.
5. After gaining access to the board, you can proceed to cleaning. It is better to lay a cloth or paper on the table that will not slip.

Some remote controls come with special latches . To separate the individual panels of the case, you must first pry them at the joint, and then pull them with force. Having carefully detached the parts, you can proceed to processing contacts. The surface of the board is covered with a cleaning liquid (sprayed as a spray). The alcohol solution is applied using a swab. Next, you need to wait about 10 seconds, then arm yourself with a cotton swab and remove dirt from all surfaces. The procedure is repeated, until the board is clean . The battery compartment also carries out contact processing.

The inside of the case must be carefully processed in the area of fastening the buttons . The holes cut out for them are wiped with a cotton swab and alcohol. The rubber pad in the form of a solid sheet can be washed with soap and a brush or treated with a paste, and then the part should be washed and dried thoroughly.

It is important not to leave the remnants of cotton wool inside - it breaks the conductivity of the contacts.

Prevention of contamination

Of course, no one does the daily cleaning of the console, but keeping it in order requires a systematic approach to business. It is recommended to carry out processing outside, including for disinfection purposes, at least 2 times a month. AND From the grooves around the buttons, dirt is cleaned out with a toothpick. If sticky substances or food residues get on the surface, they must be removed immediately.

As a preventive measure, you can use plastic wrap . It is wrapped around the surface of the remote control and left. The packaging is changed periodically, and there is no need to clean it, since dust and dirt do not penetrate inside. Such a measure does not add aesthetics, but ensures the long-term preservation of the accessory's performance.