Refilling Laser Printer Cartridges: What And How To Refill A Color Printer With Refillable Cartridges?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Today, there are a small number of people who have never needed to use a printer or print any text. As you know, there are inkjet and laser printers. The former allow you to print not only text, but also color photographs and images, while the second category initially allowed you to print only black and white texts and images. But today color printing has also become available to laser printers. From time to time, refueling of laser printer cartridges is required, and inkjet ones too, because the toner and ink in them are not infinite. Let's try to figure out how to do a simple refueling of a laser printer cartridge with our own hands and what is needed for this.

Basic nuances

When choosing a printer for color printing, users often wonder which printer is better to buy: laser or inkjet. It would seem that lasers definitely benefit because of the lower cost of printing, they are enough for a longer period of use. And a new set of cartridges costs a little less than the cost of a new unit with cartridges. You can work with refillable cartridges, the main thing is to do it right. And if we talk about why refilling a laser cartridge is so expensive, then there are several factors.

• Cartridge model . Toner for different models and from different manufacturers costs differently. The original version will be more expensive, but the simply compatible one will be cheaper.
• Bunker capacity . That is, we are talking about the fact that different models of cartridges can contain different amounts of toner. And you should not try to put more of it there, because this can lead to breakage or poor-quality printing.
• Chip built into the cartridge is also important, because after printing a certain number of sheets, it locks the cartridge and printer.

Of the points mentioned, the last one is especially important. And it is important that the chips also have a number of nuances. First, you can purchase cartridges where chip replacement is not required. That is, you only need to pay for the gas station. At the same time, not all models of printing equipment can work with them. But it often happens that this is solved by resetting the counter.

Secondly, it is possible to refuel with the replacement of the chip, but this will significantly increase the cost of work. It's no secret that there are models where replacing the chip costs significantly more than toner. But here, too, options are possible. For example, you can reflash the printer so that it stops responding to information from the chip altogether . Unfortunately, this procedure is not possible with all printer models. All this is done by manufacturers because they regard the cartridge as a consumable and do everything possible to get the user to buy a new consumable. With all this in mind, refueling the color laser cartridge should be done with extreme caution.

When do you need to refuel the printer?

To determine if a laser-type cartridge requires charging, you should look for a vertical white stripe on the paper sheet when printing. If it is present, it means that there is practically no toner and refilling is necessary. If it suddenly happens that you urgently need to print a few more sheets, then you can pull the cartridge out of the printer and shake it . After that, we return the consumable to its place. This will improve print quality, but you will still need to refill. We add that a number of laser cartridges have a chip that displays the calculation of the used ink. After refueling, it will not display the correct information, but you can ignore this.

Funds

For refilling cartridges, depending on the type of device, ink or toner will be used, which is a special powder. Considering that we are interested in laser technology, we need toner for refueling . It is best to purchase it in specialized stores that are engaged precisely in the sale of various kinds of consumables. You need to buy exactly the toner that is intended for your device. If there are several options for such a powder from different manufacturers, then it is best to buy the one that has the highest cost. This will allow you to be more confident that it will be of high quality and that the simple print will be good.

Technology

So, in order to refuel a cartridge for a laser printer yourself at home, you will need to have on hand:

• powder toner;
• gloves made of rubber;
• newspapers or paper towels;
• smart chip, if replaced.

To begin with, you need to find the right toner . After all, the physical and chemical properties of different models are different: the size of the particles can be different, their mass will be different, and the compositions will differ in their content. Often users neglect this point, and in fact the use of not the most suitable toner will affect not only the printing speed, but also the state of technology. Now it is necessary to prepare the workplace. To do this, cover it and the floor around it with clean newspapers. This is to make it easier to collect toner if you accidentally spill it. Gloves should also be worn so that the powder does not attack the skin of the hands.

We inspect the cartridge, where it is required to find a special reservoir where toner is poured . If there is such a hole in the container, then it can be protected by a plug, which must be dismantled. You may need to do this yourself. As a rule, it is burned using the tools that come with the refueling kit. Naturally, it also contains instructions on how to do this. When the work is completed, the resulting hole needs to be sealed with foil.

There are toner boxes that are closed with a "nose" lid. If you are faced with just such an option, then the "spout" should be installed in the opening for refueling, and the container should be gently squeezed so that the toner spills out gradually. From a container without a spout, pour the toner through a funnel, which you can make yourself. It should be added that one refueling usually uses the entire contents of the container, for which reason you should not be afraid that you may spill toner.

After that, you need to close the hole for refueling. For this, you can use the aforementioned foil. In the instructions, you can see exactly where it should be glued. If the user pulled the plug out of the hole, it will just need to be installed back and slightly pressed on it. After refilling the cartridge, you need to shake it a little so that the toner is evenly distributed throughout the container. The cartridge can now be inserted into the printer and used.

True, the printer can refuse to work with such a cartridge, because it happens that the chip blocks its operation. Then you need to get the cartridge again and replace the chip with a new one, which usually comes in the kit. As you can see, you can refill a cartridge for a laser printer yourself without much effort and cost.

Possible problems

If we talk about possible problems, then first of all it should be said that the printer does not want to print. There are three reasons for this: either the toner is not filled enough, or the cartridge is inserted incorrectly, or the chip does not allow the printer to see the filled cartridge . In 95% of cases, it is the third reason that is the factor due to which this problem occurs. Here everything is solved only by replacing the chip, which can be easily done by yourself.

If the device does not print well after refilling, the reason for this is either the not very good quality of the toner , or that the user has not poured enough or just a small amount into the reservoir of the cartridge. This is usually solved by either replacing the toner with a better quality equivalent, or adding toner inside the reservoir so that it fills up completely.

If the device prints very faintly, then with almost one hundred percent guarantee we can say that a low-quality toner was chosen or its consistency is not suitable for this particular printer. As a rule, the problem can be resolved by replacing the toner with a more expensive equivalent or one that was previously used in printing.

Recommendations

If we talk about recommendations, then first of all it should be said that you do not need to touch the working elements of the cartridge with your hands. We are talking about a squeegee, a drum, a rubber shaft. Only hold the cartridge by the body . If for some reason you have touched a part that you should not touch, then it would be better to wipe this place with a dry, clean and soft cloth.

Another important tip is that toner should be poured as carefully as possible, not in very large portions and only through a funnel. Close doors and windows before starting work to avoid air movement. It is a misconception that you need to work with toner indoors, which is well ventilated. The draft will carry the toner particles throughout the apartment, and they will definitely enter the human body.

If toner does spill on your skin or clothing, wash it off with plenty of water . You should not try to remove it with a vacuum cleaner, because it will simply spread throughout the room. Although this can be done with a vacuum cleaner, only with a water filter. As you can see, refilling laser printer cartridges can be done without any difficulty.

At the same time, this is an extremely responsible process that should be carried out with extreme caution, realizing what exactly you are doing and why you need certain actions.