Robin Subaru Motor Pump: Technical Characteristics Of Diesel Models For Dirty Water. Features Of PTD-306 T And PTX-301 T Motor Pumps

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Robin Subaru is a world-famous manufacturer of technical products, headquartered in Japan. The company was founded in the middle of the 20th century. During this time, the production of high-performance engines for a wide variety of technical goods began to spread.

About company

In the modern world, the brand is a subsidiary company called Fuji HeavyIndustries Ltd. Each year, the manufacturer produces a huge number of tools for various purposes. The manufacturing company specializes in the production of not only engines, but also various construction accessories. In the modern market, you can find a huge number of products manufactured under the Subaru logo.

Today, motor pumps are especially popular. These units are small sized pumps designed to work with water.

Peculiarities

All members of the Robin Subaru line have different characteristics. But despite this, they have some similarities. They will be discussed below.

• All components of the device are made of durable material. Thanks to the cast iron impeller and hermetic seals, these structures are endowed with the function of dust and moisture protection.
• There is no need to pre-fill with water to achieve good performance.

• Small size. All units of this manufacturer are small in size. They can be transported effortlessly. If necessary, it is possible to install third-party additional elements.
• Good suction lift. This figure sometimes reaches 9-10 m, while for analogs this figure reaches only 7-8 m.
• The cost always corresponds to the delivered performance.

Views

All devices are divided into two types depending on the type of fuel consumed - they are gasoline and diesel. According to the quality of water, devices are distinguished for highly contaminated liquid, slightly contaminated and clean water. The first option is equipped with a more powerful filling and gives out more performance than the other options.

Diesel

Diesel motor pumps, have several features:

• can work for quite a long time compared to competitors;
• it is possible to distill liquids with a large amount of coarse contaminants.

All diesel motor pumps are marked by the manufacturer. The PTD series includes several unit options at once.

PTD 306 T

This device is designed to work with highly contaminated liquid and is intended for irrigation of fields or drainage of soil. The device can be actively used in the communal, technical and construction sectors, it is possible to pump out liquid from the sewer manholes. It can also be used to clean large areas where livestock or poultry are raised.

The main component of the unit is a four-stroke engine. The instrument consists of a centrifugal pump and two 3”pipes. Here, on both sides, special sleeves are attached for dialing and draining water.

Peculiarities:

• the device is equipped with a filter nozzle, thanks to which debris, stones and dirt do not get inside;
• there is a pipeline to maintain the height of the column;
• for reliability, a flexible shaft of modular type is provided;
• the rotating mechanism is made of cast iron alloy, thanks to which the wheel does not rust;
• the inner part is made of high-strength steel with practically no joints, so the probability of water or air getting inside is reduced to zero.

Specifications:

• the water pressure is 23 m;
• suction - 72 m3 / h;
• suction height - 8 m;
• fuel tank capacity - 3.2 liters;
• device weight - 61 kg.

PTD 206 T

Such a pumping unit is designed for the suction of highly contaminated water with a high content of debris, earth, large stones with a diameter of up to 20 mm. The motorized pump can distill water at a speed of 13 liters per second with a maximum column height of 8 m.

In this case, the manufacturer provides for the installation of branch pipes with a diameter of up to 50 cm. The device is equipped with a four-stroke diesel engine with a volume of 2.3 m3 and a capacity of 4.8 liters. with.

PTD 405 T

This model is also designed to work with contaminated fluid. It is a fairly powerful device equipped with a four-stroke engine. It can be used both at home and in production due to its high suction lift.

Peculiarities:

• the device will cope with liquid, even if foreign particles are about 3 cm in size;
• the characteristics of the rotating mechanism, flexible shaft and internal part are the same as in the previous model;
• high performance of the device.

Specifications:

• the water pressure is 23 m;
• suction height - 8 m;
• fuel tank capacity - 4.5 liters;
• the device weighs 90 kg.

Gasoline

Robin Subaru gasoline powered fuel pumps have the following features:

• high power of fluid intake, without high fuel consumption;
• the unit is equipped with a two-stroke engine;
• designs are suitable for both home use and industrial use;
• low price when compared with diesel counterparts of motorized devices.

All equipment is marked PTG or PTX.

PTG 208 ST

This motor pump meets all the features inherent in devices that run on gasoline fuel. The motor will connect directly to the centrifugal pump, so there will be no drop in performance during operation. The unit is small-sized, but quite powerful. It is capable of pumping liquid masses of various density and contamination.

With careful use, this device will last for many years without repair or replacement parts.

Peculiarities:

• the motor pump is activated manually by means of a starter;
• the four-stroke cast iron engine will cope with the most difficult tasks;
• ventilation is provided;
• the device is equipped with a cooler that protects the device from overheating.

Specifications:

• the water pressure is 23 m;
• suction - 72 m3 / h;
• suction height - 8 meters;
• fuel tank capacity - 2.5 liters;
• productivity - 0.7 m3 / min.;
• unit weight - 61 kg.

PTX 401 T

This is another outstanding representative of motor pumps for handling dirty liquids with a large amount of foreign impurities, silt, earth. In the basic configuration, there are additional accessories for plumbing installation and wiring. This option is very popular with Russian buyers.

Of the features, the following positions can be noted:

• the rotating mechanism is made of chrome;
• the presence of a fairly strong clutch;
• the gas tank has a capacious volume and a transparent insert, thanks to which you can control the remaining fuel;
• the manufacturer offers a two-year product warranty; there is an official service center in Russia;
• with a primer starter, start-up times are significantly reduced.

Technical data:

• the water pressure is 27 m;
• suction height - 8 meters;
• fuel tank capacity - 7 liters;
• productivity - 0.7 m3 / min.;
• the unit weighs 61 kg.

PTX 301 T

The design has an engine with a power of 6 liters. with. Thanks to him, it is possible to pump liquid at a speed of 26 liters per second, which is one of the best indicators.

The manufacturer assures that the model handles water with the presence of foreign objects up to 31 mm in diameter without any problems. The mud pump is quite expensive and is not intended for home use, but the performance fully justifies the price.

PTG 110

This variation does not differ in performance. The maximum size of permissible contamination is less than 1 cm. This model is perfect for giving. This modification is mainly used in fire fighting activities.

Features of the model:

• has a two-stroke engine, the power of which reaches 1, 2 liters. with.;
• pressure - 35 m;
• spacious fuel tank with a volume of 0.6 liters;
• the unit has a high-strength frame;
• the device does not make loud noises;
• the presence of ergonomic holders for manual transportation;
• the motor pump is quite stable on a flat surface.