Motor Pump Huter: Characteristics Of The MPD-80, MP-50, MP-40 And MP-25 Models. Operating Tips

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

The Huter motor pump is one of the most common pump brands in the Russian Federation. The manufacturer of such equipment is Germany, which is distinguished by: a systematic approach to the production of its equipment, scrupulousness, durability, practicality, as well as a modern approach to the development of such units.

Gasoline or Diesel?

The Huter motor pump runs on gasoline. This means that this technique is unpretentious to use, more economical than the one that runs on diesel. Another feature, the pump must be run at least once a month.

Gasoline Huter differs from its competitors in efficient work, high-quality technology for the production of equipment and components.

Consider the characteristics of the main models of the presented unit.

The main characteristics and advantages of the models

MP-25 - economy variant technique. Compact, however, less productive. Pumps clean and slightly contaminated liquids. Often used for indoor swimming pools, watering plants, and indoor work. Differs in low noise, low amount of gas emissions. Consists of a motor, pump and metal housing.

The main advantages include:

• good engine performance;
• the volume of the gas tank is enough for several hours;
• convenient manual starter; solid rubber support for the unit;
• small and light equipment.

MPD-80 is a device for pumping dirty liquid. By design, it is no different from other models of the presented company. However, it is distinguished by high performance and high power.

The advantages include:

• silent work;
• large volume for gasoline;
• the support is made of steel;
• you can easily remove the pump if necessary.

MP-50 - the model is designed for clean and slightly contaminated liquid. It is considered one of the most productive in its category. It differs in the height of the liquid stream supply, raises liquid from a depth of up to eight meters.

The operating features are as follows. The first oil change is best done after five hours of operation, the second after twenty-five hours of operation, then follow the instructions.

The main advantages are: the four-stroke engine, which runs quietly, consumes quite a bit of gasoline. You can check the oil using a dipstick. The technique is started with a starter.

MP-40 - a productive model that uses fuel efficiently. This unit requires little gasoline, which is poured into various special compartments.

The model has the following advantages:

• stable steel frame;
• good pressure component;
• takes liquids from a depth of 8 meters;
• manual start is very convenient and compact.

It should be noted that for the high-quality operation of the engine on gasoline, there is compression in its cylinders, which shows the maximum pressure when the internal combustion engine is idling. The compression level for each type of equipment and engine model is different.

Expendable materials

To consumables for motor pumps include the following equipment.

• Pressure hoses that deliver water from the pump to a certain distance. For example, for watering a garden or extinguishing a fire. Their peculiarity lies in the fact that they retain their strength even at high pressure.
• Suction hoses that draw fluid. For example, from a reservoir to a motor pump. Equipped with sturdy walls made of special materials.

Safety precautions for using Huter motor pumps

• Read the instructions carefully before using the pump for the first time. The fuel tank must be tightly closed.
• Install the pump firmly on a flat, solid surface.
• If the equipment is used indoors, there must be good ventilation. Check the engine oil level before starting work.
• The pumping part must contain water at the moment the motor pump is turned on.
• Consider the availability of fuel and the period of its filling. Fuel in the tank should not be more than 45 days if the motor pump is not in use.
• The air filter must be cleaned before each use. It is sufficient to clean the fuel filter once a month.
• Remember to check the spark plugs.

Breakage

To the main reasons associated with a malfunction of the motor pump the following indicators can be attributed.

• Fuel valve not closed tightly. In this case, fuel can enter the crankcase. This, in turn, will result in high pressure and rapid expulsion of the seals. Then the mixture will get into the valve and the muffler, and the muffler, with such a malfunction, will reduce traction.
• During transportation, the engine is often turned over, so that gasoline and oil mix, get into the carburetor. To rectify the situation, it is necessary to disassemble the equipment and clean all the components.
• Crank the engine incorrectly with the recoil starter. It is important to pull the handle until the “cams” engage and then smoothly pull it up.
• The engine can run, but not at full power. This may be due to a dirty air filter. Poor quality gasoline or carburetor malfunctioning.
• If the pump produces a lot of smoke, the fuel mixture (gasoline and engine oil) may be incorrectly selected.