Geyser Motor Pumps: An Overview Of The MP 20/100, MP 40/100 And 1600 Models, Technical Characteristics Of Fire And Gasoline Motor Pumps

Table of contents:

Video: Geyser Motor Pumps: An Overview Of The MP 20/100, MP 40/100 And 1600 Models, Technical Characteristics Of Fire And Gasoline Motor Pumps

Video: Geyser Motor Pumps: An Overview Of The MP 20/100, MP 40/100 And 1600 Models, Technical Characteristics Of Fire And Gasoline Motor Pumps
Video: How to start a boy diesel water pump for Irrigation 2024, April
Geyser Motor Pumps: An Overview Of The MP 20/100, MP 40/100 And 1600 Models, Technical Characteristics Of Fire And Gasoline Motor Pumps
Geyser Motor Pumps: An Overview Of The MP 20/100, MP 40/100 And 1600 Models, Technical Characteristics Of Fire And Gasoline Motor Pumps
Anonim

Carrying liquid in buckets or even pumping it with hand pumps is a dubious pleasure. The Geyser motor pumps can come to the rescue. But in order for the investment in their purchase to be fully justified, you need to approach the choice as carefully as possible.

Peculiarities

Geyser products deserves the most attention for the following reasons:

  • the pumps are reliable and quite practical;
  • they can suck in water automatically;
  • remote start on command is provided;
  • maintenance and repairs are simplified to the limit.
Image
Image

Diversity

MP 20/100

The fire pump "Geyser" MP 20/100 is in demand. The technical data sheet contains the following characteristics:

  • starting is carried out by an automatic starter;
  • total engine power with a volume of 1500 cubic meters. cm is 75 liters. with.;
  • hourly fuel consumption is 8, 6 liters;
  • in a second, up to 20 liters of liquid are ejected through the barrel, ejected per 100 m.

A motor pump with a total weight of 205 kg is guaranteed for 1 year. The mechanism is recommended for rural and urban areas.

The capabilities of the gasoline pumping unit are such that it is in demand even by the structures of the Ministry of Emergency Situations of the Russian Federation. Water intake is automatic. The scope of delivery includes a search light.

Image
Image

MP 40/100

"Geyser" MP 40/100 stands out even in comparison with the previous device. The power of the stationary device reaches 110 liters. with. Such a force allows throwing 40 liters of water per second at a distance of up to 100 m. The designers have provided for water cooling of the engine. The engine itself, consuming 14.5 liters of AI-92 gasoline per hour, is connected to a tank with a capacity of 30 liters - that is, you can extinguish the fire for about 2 hours.

First, the water passes through a 12.5 cm wide hole . At the outlet, you can connect several barrels of 6, 5 cm. The total mass of the pump reaches 500 kg. With its help, the flame is extinguished with both pure water and solutions of foaming agents. Model 40/100 can be used in emergency pumping mode.

Image
Image
Image
Image

1600

If the requirements for a motor pump are exactly the same, you should give preference to the Geyser 1600 version. In one hour, it is capable of throwing up to 72 cubic meters of water onto the combustion center. m of liquid. The dry weight of the installation reaches 216 kg. The longest extinguishing distance is 190 m. In 60 minutes, the pump will consume from 7 to 10 liters of AI-92 gasoline. The exact figure is determined by the intensity of the work.

Image
Image

MP 13/80

The motor pump "Geyser" MP 13/80 is presented with a drive from a VAZ car. The pump is able to take water from containers and from open sources of various types. With the help of this equipment, liquids are often pumped from one reservoir to another, basements and wells are drained, and gardens of various sizes are watered. The technical characteristics of the device allow it to be used at temperatures from -30 to +40 degrees. The value of the pressure in the nominal mode ranges from 75 to 85 m. AI-92 gasoline is used as fuel.

Image
Image

1200

‌The manufacturer of the pumps guarantees that the Geyser 1200 motor pump is capable of providing a head of water up to 130 m. Under these conditions, fire fighting becomes noticeably more effective. In 1 minute, up to 1020 liters of liquid can be pumped towards the hearth. But it is worth noting that now such a pump has been discontinued. Its more modern counterpart is the MP 20/100 model.

Image
Image

MP 10 / 60D

If you are interested in motor pumps with increased anti-corrosion resistance, you should give preference to the MP 10 / 60D model. This device provides a head up to 60 m, sucking water from tanks and reservoirs up to 5 m deep. The hourly fuel consumption reaches 4 liters. The dry weight of the product is 130 kg.10 liters of clean water is supplied per second.

Image
Image

MP 10/70

Of the new products, it is worth taking a closer look at the MP 10/70 version. Pumping unit with a total capacity of 22 liters. with. supplies up to 10 liters of water towards the fire site. The pump motor is cooled by air movement. A diaphragm vacuum pump gives a water column of 70 m. A four-stroke engine consumes 5.7 liters of AI-92 gasoline per hour.

Recommended: