2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Often, a dirt road is used as an entrance to a country house or cottage. But over time, due to intensive use and exposure to rain, it becomes practically unusable, pits and potholes appear on it. One of the most profitable ways to restore such a road, to make it even and strong, is to add rubble.
Peculiarities
The device of the roadbed by dumping crushed stone is a rather complicated process. Here, simply filling the existing track without additional production processes, such as ramming, will not be enough . The filling is done in layers. The layers have a thickness of 20 to 40 centimeters, depending on the conditions in which the work is performed. This allows you to drain rainwater as efficiently as possible and distribute the load in the pie of the road, extending its resource.
With timely maintenance - adding crushed stone - it can last a long time, only slightly inferior in quality to asphalt or concrete pavement
Considering that the prices for crushed stone are much lower than for asphalt and concrete, this type of road surface will be ideal for a country house or summer cottage where there is no large traffic flow. It allows you to save a lot of money and effort.
Advantages of filling the road with rubble:
- affordable prices for materials;
- durability of the road surface;
- filling work does not depend on weather conditions and can be carried out at any time of the year;
- does not pollute the environment.
What kind of crushed stone is needed?
Crushed stone is a versatile material used in almost all areas of construction. It differs in many ways, in particular in its origin. It can be produced from rocks, there is also ore and secondary crushed stone, which is also popular.
This material has the following characteristics:
- crushed stone fraction (particle size);
- flakiness (geometry of shape);
- density and strength;
- frost resistance and level of radioactivity, which are indicated on the label.
For filling roads, crushed stone from rocks is most often used. It has the right characteristics to withstand fairly intense loads. The preference is given to granite and limestone rocks. Crushed granite has a strength grade of M1400, which allows it to withstand fairly high loads for a long period . Limestone, due to its lower strength, is used as a "cushion" under the base of the road. For different layers, it is recommended to use different sizes of crushed stone: sprinkle the lower layer with a larger one, and the upper one from the material of smaller fractions.
And also in order to save money, you can arrange dumping of roads using secondary crushed stone. At its cost, this is the most profitable option, but it is slightly inferior in strength to natural materials.
Calculation of the amount of material
Before starting work, it is necessary to accurately calculate the amount of materials required in order to avoid an unpleasant situation with an unexpected shortage of them.
For a correct calculation, it is necessary to know the quality of the substance used (in this case, crushed stone) - the specific gravity and the compaction coefficient . These data can be found in the technical documentation or check with the manufacturer. The following indicators are considered typical for granite crushed stone: specific gravity - from 1, 3 to 1, 47 t / m3, compaction coefficient during rolling - 1, 3. Calculations are made per 1 square meter of roadway and are made according to the formula:
layer thickness (meters) * layer width (meters) * layer length (meters) * specific gravity * compaction factor
So, for filling one square meter of a road with a layer of granite crushed stone 25 centimeters thick, you will need:
0.25 x 1 x 1 x 1.3 x 1.3 = 0.42 t
The area of the roadway is calculated by multiplying its length by its width.
Construction technology
For the highest quality work on filling the road with crushed stone, it is necessary to attract special road construction equipment, such as a motor grader, road vibratory rollers, trucks for the supply of materials. This is due to the laboriousness of some production processes. But to do such work with your own hands with small volumes is quite feasible.
There are several main stages in the construction of a road from crushed stone for long-term operation
Removing the top layer of soil
With the help of a bulldozer, a layer of soil up to 30 cm deep is cut off, after which it is carefully compacted with rollers.
This prepares the place for the next stage.
Sand cushion device
The layer thickness varies from 20 to 40 centimeters. The sand layer is also compacted tightly. For a more complete shrinkage, the layer is poured with water.
Crushed stone cushion device
At this stage, a layer of crushed limestone, the so-called pillow, is dumped. It serves as the basis for laying the main coating of crushed granite.
A coarse fraction is used to improve drainage properties. The layer is also compacted with rollers.
Dumping the top layer
The last layer must be covered with granite crushed stone of a finer fraction.
Grading
After backfilling the last layer of gravel, it is necessary to level the roadway over the entire area.
After that, a final thorough compaction is carried out.
Correct and consistent performance of all stages of work will ensure the durability and good performance of the road.
An important stage of work is the arrangement of roadsides . As a rule, backfilling of the shoulders to raise their level is made from the soil of the nearby territory. After filling the roadsides, they are leveled and strengthened.
For the device of temporary coverage, for example, for organizing an entrance to the place of construction work, which does not imply long-term use of an embankment road, the implementation of all stages is not a prerequisite. The place where the transport is supposed to be passed is simply covered with rubble and leveled, sometimes even without additional ramming.
Recommended:
Construction Crushed Stone: Natural Stone And Other Types. The Use Of The Material In Construction And Composition. Garbage Processing Into Crushed Stone
Construction crushed stone is widely used in construction. What is the composition of natural stone and other types of material?
Density Of Crushed Stone: Bulk And True Density Of Crushed Stone 5-20 Mm, 40-70 Mm And Other Fractions, Table And GOST, Average Density Of Black And Other Crushed Stone
Crushed stone density: bulk and true. The density of crushed stone is 5-20 mm, 40-70 mm and other fractions, table and GOST, average density of black and other crushed stone
Splitting Crushed Stone: What Is It? Crushed Stone Consumption 20-40 And 70 Mm, Splitting Of The Crushed Stone Base With Sand And GOST
Splitting crushed stone is a necessary process in the construction of roads and various structures. It is worth considering in more detail what it is, and how to determine the consumption of crushed stone 20-40, 70 and 120 mm
Crushed Stone Grades: Crushed Stone And Strength, Abrasion And Frost Resistance, Crushed Stone 600-800 Mm And 1000-1200 Mm, Other Markings
Crushed stone is a free-flowing material obtained in various ways. Crushed stone grades are a common way of obtaining information. They represent the properties of crushing and strength. Surface characteristics (in terms of abrasion and frost resistance) determine the scope of application
Crushed Stone Blind Area (24 Photos): What Crushed Stone Is Needed For A Blind Area Around The House? DIY Step-by-step Instructions For Filling, Diagram
When building a house, it is important to protect the building from rain and melt water. This is done by a special crushed stone blind area. You can do it yourself. In this case, you need to know what kind of gravel is needed for the blind area around the house, the sequence of construction
