Dowel For A Self-tapping Screw (24 Photos): How To Match It To A Self-tapping Screw According To The Table? Dowels For 6 Screws And Other Sizes

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-16 04:36

Self-tapping screw is a universal fastener that combines the advantages of both a nail and a screw. To hammer it, of course, is not worth it, it is much more effective to screw it in. This makes him related to a screw. However, the large length and hard alloy turn the self-tapping screw into an independent structural element, allowing it to quite successfully compete with nails.

For that so that this fastener does its job, not only by being screwed into the wood, but also in combination with harder and denser materials, another consumable fastener was developed, called the dowel , made of a more plastic and soft material, allowing the self-tapping screw to securely anchor in concrete or brick. And how to choose a dowel for a self-tapping screw, we will consider further.

Features of choice

In general, the design of such a fastener is quite simple. The dowel is a plastic sleeve having at the end opposite the hole into which the self-tapping screw will be screwed in, longitudinal slots diverging in the process of screwing this self-tapping screw . The petals formed in this way wedge the fasteners. For a more durable connection, the surface of the petals is covered with various kinds of thorns or stops.

Having come to a specialized store in order to purchase dowels for certain installation work, a layman is faced with a serious choice problem . There are many options for these fasteners.

First of all, the variety of colors will be striking, then it turns out that the sizes (length and diameter) of the dowels are not the same . But upon detailed study, it turns out that they can also be different in shape (the number of petals, various thorns, and much more).

The conclusion from this may be the following: before going to the store to purchase dowels, it is worthwhile to clearly define what they were actually needed for. Then the conversation with the consultant will be more substantive.

Let's consider some selection criteria - by the way, this is what a consultant of a specialized hardware store will most likely be interested in:

• it is necessary to select a dowel for a self-tapping screw based on the tasks that are assigned to the mount;
• it is equally important to take into account in what material the fasteners are supposed to be carried out;
• sometimes there may be some decorative restrictions.

Which one is suitable for different types?

The selection of the dowel is determined by several factors.

Its appearance depends on the material in which it will have to be fixed . Dowels for solid brick or concrete have serious differences from consumables used for porous or hollow materials. Correspondence of the design to the material for which it was developed significantly increases the reliability of the fasteners.

So, a simple spacer consumable with two petals can be driven into concrete, and it will be quite enough to hold the corresponding size of the self-tapping screw.

Such a dowel may also be suitable for fasteners in solid brick, but given that it is still a more fragile material, fasteners with 3 or 4 petals, and even with additional holding devices in the form of various kinds of thorns, may be more suitable for a brick.

For fasteners in a hollow or porous material, you will have to select a consumable with several active zones, with special complex spacers that allow you to cling to the harder parts of the drilled material. Very popular in the case of a hollow material is a fastener called a "butterfly", which, when tightening the self-tapping screw, forms a complex knot that expands it in the pores of the material.

Dimensions (length and diameter) are determined by the load that the fastener must withstand . To hang a picture or a photo frame on the wall, you can get by with a very small dowel of a simple device with a diameter of 5 mm. The length does not really matter in this case, so you do not need to drill a deep hole. The maximum size of such consumables is 5x50 mm. Dowels under 6 mm differ in a variety of lengths: 6x30, 6x40, 6x50 mm.

Securing heavy equipment or exercise equipment will require more powerful fasteners with a diameter of 8 mm or more . The most popular in terms of sales is the size group 8x50 mm. Often these dowels are marked as 8 x 51 mm. They can be successfully used for the installation of lightweight structures, and used for serious installation work.

The less popular size of dowels of 10 mm or more is explained by the relatively higher price and more specific application, usually rarely found in everyday life.

Correctly selected dowel size allows the use of a self-tapping screw corresponding to the load. The dimensions of modern plastic dowels are standardized in terms of the ratio of length and diameter.

The table clearly shows the existing variety of dowel sizes:

Diameter (mm)	Length (mm)	Self-tapping screw diameter (mm)
	25, 30	3, 5 – 4
	30, 40, 50
	30, 40, 50, 60, 80
10	50, 60, 80, 100
12	70, 100, 120
14	75, 100, 135,	10

When choosing the length of the self-tapping screw, it is important to add the thickness of the material to be fastened, since it is important that the self-tapping screw reaches the bottom of the plastic sleeve when screwing in - only in this case the fastening properties will appear in full. The wrong diameter of the self-tapping screw can also cause poor-quality fasteners: either the petals will not open and wedging will not occur, or the sleeve will be torn, which is also unacceptable, since the adhesion to the material will be broken.

The dimensions of the dowels and self-tapping screws determine the maximum loads allowed for the fasteners.

Small dowels with a diameter of 5 mm at any length cannot be used to fix bulky items . They are ideal for hanging a picture, photo frame and similar objects of light weight on the wall.

Products with a diameter of 6 mm are all suitable for the same paintings, but this size is most in demand when installing various kinds of finishing materials.

Fasteners with a diameter of 8 mm can withstand higher loads than 5 and 6 mm dowels. With such fasteners, you can install shelves, wall cabinets, fix furniture. Reinforced consumables with a diameter of 10 mm or more can successfully perform the functions of installing not only decorative materials, but also partitions, large items or household appliances, scaffolding and others.

Another criterion on the basis of which you can choose a fastener is the material of the dowel. Of course, a classic self-tapping screw is screwed into a plastic dowel, more precisely, in its variety: polyethylene, polypropylene, nylon (polyamide).

If you need to mount anything outdoors, it is best to use a nylon plug, as this material retains its properties at high temperature ranges. Any plastic dowels are suitable for interior work. But polyethylene has much higher plasticity.

In special cases, the use of self-tapping screws, in general, will have to be abandoned . For example, for fastening frame structures (windows, doors), gratings, awnings, heavy equipment and in some cases when reinforced fasteners are required, it is necessary to resort to using a steel dowel.

Recommendations

Naturally, over the years of operation of screws and dowels, various approaches have been developed that make it possible to use them more productively. Here are some of the expert recommendations.

• When choosing fasteners for certain purposes, first of all, you need to choose a dowel, and only then - a self-tapping screw to it.
• Dense solid material allows fasteners to withstand higher loads than hollow or porous, even with smaller consumables.
• When choosing the length of the self-tapping screw, the thickness of the material that is supposed to be fixed with it should be added to the length of the dowel. For example, fastening a sheet of plywood 10 mm thick will require adding another 1 cm to the length of the dowel. So, with a sleeve length of 50 mm, the self-tapping screw should be 60 mm long.
• Having drilled a hole of the appropriate diameter, it is imperative to remove dust, splinters and debris from it, otherwise it may be impossible to place a dowel in the hole. Inexperienced craftsmen try to insert a dowel of a shorter length into such a hole. Doing this is completely undesirable - full consolidation may not occur. It is recommended to use a vacuum cleaner to clean the hole. The problem of preparing the hole for installation is especially relevant if you have to mount something to the floor. The hole in the wall can be cleaned with a self-tapping screw or nail.
• If the fasteners are made into a dense base (concrete, solid brick), then the thickness of the attached object can be 60% of the total length of the self-tapping screw. If fasteners are made in loose material, at least 2/3 of the self-tapping screws must be immersed in the wall in the dowel.

It is important that the end of the screw reaches the end of the dowel.