How To Unscrew A Nut With Torn Edges? How To Unscrew A Licked Nut In A Hard-to-reach Place? How To Remove A Nut With A Stripped Thread With A Wrench?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10

The most unpleasant moments in everyday life or at work are not the processes of repairing any equipment themselves, but the problems that arise when disassembling its components and mechanisms. Difficulties are most often encountered when dismantling connections made with bolts and nuts. Consider the reasons that prevent you from unscrewing the nut from the stud or bolt, and also find ways to solve this problem.

Causes of the problem

Several factors can be the main causes of difficulty in removing nuts

The impact of corrosive processes on the metal of fasteners . It all depends on the time and intensity of the action of corrosion: the longer and more actively the process takes place, the more problems with dismantling the fasteners. In this case, the thread of the mating parts is disturbed, the edges of the nut can be ground off with rust, and in addition to everything else, parts of the thread can firmly adhere (stick) to each other due to complex corrosive and chemical-physical phenomena occurring on the working equipment.

The use of a poor-quality tool or a tool intended for completely different purposes . Often, kits of tools for car repair or household needs are purchased at bargain prices from hands, in markets, in auto parts stores. But you need to understand that a set of a good tool cannot cost 500 rubles. As a result, it turns out that the keys in such a set are made of low-grade soft metal, therefore, when tightening or unscrewing the fasteners, even with a slight application of force, the working parts (horns) are deformed and begin to not correspond to the specified size of the tool. The result is the ripped edges of the nut. The same happens if you use for such manipulations not the keys intended for this, but, for example, pliers or a gas wrench.

The bolted connection used a mild metal or low grade steel nut that is not suitable for the fastener . When even a small effort is applied, the edges on it very often lick off, and it will not work to unscrew the licked nut with an ordinary wrench.

When tightening or unscrewing the nut, a force was applied that significantly exceeds the allowable for this connection . As a result, two problematic options can happen: torn edges or broken threads. There is a third option, but it is no less problematic than the first two. It often happens that both malfunctions happen at once from one enhanced effect on tightening the threaded connection - and the edges are licked off, and the thread breaks off.

The reasons for the problems are clear, now we will consider options for solving them.

How to unscrew?

For every case when it is not possible to remove a nut from a bolt or stud for the reasons indicated above, there are practical ways to remedy the situation. It will be useful to learn about them for motorists and other people who have to deal with the repair of equipment.

The edges are torn off

The following tools can help here:

• a head with an appropriate size (especially in cases where not all edges of the edges on the nut are torn off);
• gas wrench;
• pliers or pliers (with small fasteners);
• special extractor for nuts with stripped edges.

If these tools do not cope with the task, then more time-consuming measures need to be applied:

• restore the edges by filing with a file or cutting with a grinder (you will get a turnkey edge of a smaller size);
• weld another on a nut with licked edges - with clear edge boundaries;
• when the problem is in the torn edges of the stud or bolt, then you can weld a T-pin to the head of these fasteners and use a lever to try to unscrew them.

Rusty fasteners

Sometimes it is possible to unscrew the rusty parts of fasteners after tapping them with a heavy object, as well as soaking the rust with kerosene or special means.

In addition, you can quickly warm up the nut with a soldering iron or a construction hairdryer and try to unscrew it without waiting for the stud or bolt to warm up.

Broken thread

In cases with stripped threads, neither the tools nor all the repair measures described above for stripped edges and rust can help. If there is free access to problem areas, then a special tool called a nut cutter can come in handy . With its help, the nut with the stripped thread is split in half and removed from the bolt, and a new one is then screwed in its place. If the thread on the pin is broken, then you have to completely remove the connection.

Sometimes the thread is broken on the pin of the bolt or the hairpin in the middle, so the nut does not completely unscrew, as the damaged area interferes with this.

This problem can be easily solved - the hairpin or pin is cut off along with the torn off thread

Unfortunately, many of the named methods are not suitable for solving this problem in a hard-to-reach place. In such places, drastic measures are most often taken - either they cut off the fasteners completely, or dismantle them in parts (for example, cut off a nut, and then drill out a pin or hairpin).

Recommendations

The best way to avoid such problems with threaded fasteners of parts and assemblies is to periodically take preventive measures. For example, fasteners located in hard-to-reach places or in difficult operating conditions must be periodically "pacing" - untwisted, and then screwed back into place.

Besides, during repairs, it is imperative to lubricate all threaded connections with graphite or other special grease . Such a measure will prevent the occurrence of corrosion processes in the joints, as well as, if the need arises, to facilitate their dismantling.

Always use a torque wrench when tightening the nuts. For many threaded connections in a car or other critical equipment, the tightening torques are prescribed in the instructions.

These recommendations should not be neglected, otherwise you can not only tear off the threads or edges on the fastener, but also break a more valuable part or part of the mechanism.

When dismantling bolts and studs using welding or a grinder, all safety measures must be taken into account . It should be remembered that negligence when working with such units can lead to personal injury, as well as to a fire on equipment with oil and gasoline.

Having made the repair of the equipment, replace all the old, rusty, bent or with broken threads and edges with new fasteners . Do not save on such trifles, respect your work and time that may be needed in subsequent repairs.