2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
In stores of household goods, building materials, you can often find barrel nuts M6, M8, M10 and other sizes. It is imperative to understand, however, what these fasteners are made of, and how barrel nuts should be used. The correct use of such products depends on the answer to these questions.
Description and purpose
The barrel nut is one of the types of fastening hardware … Its characteristic specificity is the presence of a flow hole . Various types of threads are cut inside.
Such a product is in demand when creating various types of furniture:
- cabinet;
- armchairs;
- sofa;
- bedside tables and a number of other products.
The barrel-shaped type of fastener can also be used as a retainer for various screws and bolts. In online stores and real trade, you can find products of various sections. Some models are formed from extra strong components. A high-end keg nut can help create a good fit.
It is worth noting that it is sometimes called "countersunk"; when installing, they immediately try to align the hole with a suitable screw.
What are they?
Keg nuts M5 format can have one threaded hole. This product is suitable for assembling cabinet furniture. Most often, galvanized steel is used for the manufacture of such fasteners. A straight slot can be used to facilitate the alignment of the fastening axles when screwing in. The M6 barrel nut can also be supplied with a straight slot.
In many online stores, by the way, the highest popularity of just such a modification is noted. The size of this fastener can be:
- 1x1, 4 cm;
- 1x1.6 cm;
- 1, 2x1, 3 cm;
- 1x3 cm;
- 1x1, 8 cm;
- 1x2 cm.
For manufacturing, black oxidized, galvanized and even blued steel can be used. As for products of the M8 type with a straight slot, all of them are made of galvanized steel. The dimensions are 1.2x1.6x0.8 cm. The thread pitch is usually 1.25 cm. Typically the right-hand thread direction.
M10 barrel nuts with a straight slot and a single threaded hole can be made of free-cutting steel. Stainless steel is available on request. Deliveries are carried out in batches of 500, 1000 or 2000 pieces. Such a product is in demand mainly in the furniture industry. Installation is carried out in pre-prepared holes.
Sometimes there are plastic liners with flange and unthreaded hole . They are intended for confirms screws (self-tapping screws). The polymer nut is inserted into the recess of the particular part. A special hole is used to insert external fasteners. Overall dimensions 1, 18x1, 5x0, 95 cm.
Usage Tips
The installation procedure for the barrel nut begins with the penetration of the through channel (it will be the seat). This channel must be exactly the same size as the nut cylinder. The attachment point is drilled using a cutter. The fasteners are deepened by hammer blows or in the process of tightening. Screws or bolts are screwed on the other side. To distribute the load more evenly, a special elongated washer can be used, complying with DIN 9021 standards.
It is useful to consider that:
- the hole should be slightly larger than the outer diameter of the nut;
- they drill it during production on metal-cutting machines (it is inappropriate to try to make such a hole on your own);
- straight slot makes it easier to adjust the location of the nut and its docking with the screw;
- the size of the product must be such that it fits exactly the level of the furniture board.
Help prevent spontaneous unwinding:
- washers;
- a combination of washers with grovers;
- synthetic fixing compound;
- the use of a cotter pin.
For more information about the barrel nut, see the video below.
Recommended:
Nuts With Press Washer: М5 And М6, М8 And М10, М12 And Other Sizes, For Alloy Wheels And Other Areas Of Use
Nuts with a press washer, what are they? What is the difference between models with sizes m5 and m6, m8 and m10, m12 and samples of other sizes? What models are used for alloy wheels and what other uses for such fasteners are there? What types of nuts are there?
Connecting Nuts: Extended Nuts М8 And М10, М12 And М6, Sizes Of Long Nuts М4, М16 And М5 According To GOST, Chain Connectors
Union nuts, what are they? What are the features of elongated nuts m8 and m10, m12 and m6? What are the sizes of long nuts m4, m16 and m5 according to GOST? What does the labeling of such clips include?
Faucet Nuts: Sizes Of Nuts For Fixing Taps In The Bathroom And In The Kitchen, The Distance Between The Clamping Nuts Of The Sink. How Can I Change Them?
Faucet nuts are most commonly used for fixing taps in bathrooms and kitchens. A huge selection of sizes and types will make you think - which one to choose? A large number of tips for choosing, as well as instructions for replacing nuts can be found in this article
Flange Nuts: GOST Nuts For Flange Connections, Hexagon M6 And M8, M10 And M16, Nuts Of Other Sizes
What you need to know about flange nuts? What are the provisions of GOST nuts for flange connections? What you need to know about hex nuts M6 and M8, M10 and M16, about flange nuts of other sizes?
Furniture Nuts: Driven, Mortise And Countersunk Nuts For Wood, Mustache And Screw-in Nuts, M8 And M6, M10 And M5, Other Types. How Do I Install Them? GOST
Furniture nuts are the main design features. Hammer-in, mortise and countersunk nuts for wood and plywood. Frequently used types of furniture nuts: mustache and screw nuts, m8 and m6