Anchors (36 Photos): What Is It? Anchor Bolt Types, Anchor Weight, Ground Metal Anchor And Other Models. How To Fix Them?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Previously, craftsmen had to specially grind wooden structures, very reminiscent of corks, in order to attach something to concrete. They made a hole in the wall in advance and hammered these cork pieces into it. The reliability of such fasteners was not particularly high, the wood dried out, and the fastener would soon simply fall out. But progress gave an idea that was more impressive in durability - this is how plastic structures appeared. Yet even they were not perfect, replaced by an anchor bolt. Let's take a closer look at what an anchor is and how it happens.

What is it and why are they needed?

An anchor is a fastener that is driven in, screwed in or inserted into the base. It can not only gain a foothold in the base, but also hold an additional structure . This word has German roots and denotes an anchor, which quite accurately reflects the principle of operation of the fastener. And it really looks like an anchor: the working area of the bolt, when fixed, turns out to be expanded and firmly secures the connection.

For what purpose are anchors taken in repair and construction: they work with solid (varying degrees of hardness) base structures . And this is brick, concrete and natural stone. The anchor is capable of supporting massive structures or products subject to dynamic loading. These are plumbing objects or TVs on the wall, suspended ceiling structures, sports equipment on a sheet structure.

But the anchor is quietly considered a versatile and convincing fastening . Therefore, anchors are available for interaction with porous and lightweight base structures, for joining furniture pieces, hollow slabs, wood and doors. Interestingly, anchor fixation is now used even in dentistry: the anchor pin is installed in the dental root canal, while the principle of its action is similar to the construction one.

A ground anchor, for example, is used for the foundation of chimneys. You can attach a chandelier to the anchor, and so on. But this is not always the ideal choice, for some other works self-tapping screws are more suitable - everything is individual.

Specifications

The anchor bolt in its classic version is a combined metal structure. It includes a non-spacer part, a body and a spacer, which is the most functional . Here the base will be a bolt, a screw, maybe a nail, a hairpin. But the spacer part is in the form of a sleeve, cone-shaped, sleeve-shaped. The acting bolt is such that its workplace expands, and fastening is carried out according to physical laws.

The anchor differs from the dowel in what it is made of . The dowel includes a soft part. Usually it is made of plastic, fasteners are fixed in it, this is the same self-tapping screw. The fixing principle works on the friction of the base (where it is fixed) and the fastening element (which is fixed). The anchor is often made from brass and steel, aluminum billets. Anchors are designed for a higher weight than dowel fasteners.

The principle of holding the anchor is as follows:

• friction - the load is applied to the element, it will transfer to the base by friction of the anchor bolt against this material; this is facilitated by the expansion force, it is also formed by a collet spacer or a PVC dowel;
• emphasis - the loads falling on the anchor bolt compensate for internal elastic forces or bruises that appear deep on the anchorage; this phenomenon is observed in collet elements, as well as in foundation anchor bolts;
• monolithization - the bolt loads compensate for the stresses in the contact zone of the fastening elements; this applies to glue and embedded bolts without broadening and stop.

Many anchors do not work on one of these principles, but on a combination of them. The anchor is capable of collapsing in its weakest place. Tearing out, shearing, fracture or plastic bending, pulling out of the base material, corrosion, melting or burnout can occur.

Species overview

Obviously, there are a lot of anchor bolts, which is why it is customary to divide them into categories, according to the same categories, describe.

By the terms of operation

Everything is simple here: they can be permanent or temporary. For example, temporary ground anchors work for a period of 2–5 years . They serve only as temporary structures. When the standard term of use ends, the anchor can be retested, its service life will increase. For example, a retaining structure for fencing pits will not be durable - it is being built for a while. Therefore, it is reasonable to fix it with ground temporary bolts.

By size

Fasteners are divided into small, medium and large. Small has a length of no more than 5.5 cm, and its diameter will be 0.8 mm. Medium - these are elements, the length of which can be up to 12 cm, and the diameter is already increasing to 1, 2 cm. Large anchor bolts are called fasteners up to 22 cm long, and up to 2.4 cm in diameter.

By material

The metal determines a lot in the future reliability of the connection. The described elements are made from the following materials:

• carbon-reduced structural steel; such a metal will provide a strength margin, allowing the use of clamps for really very high loads;
• corrosion resistant steel; this material contains alloying elements, but it is not only a high margin of safety, the material is resistant to corrosion processes, so the anchor can be used in building conditions with humidity above normal;
• aluminum-zinc alloys, i.e. brass; such anchors are designed for use mainly in domestic conditions.

If we talk specifically about the base material, that is, anchors that are designed especially for dense concrete, stone or brick. Bolts for hollow cores are included in a separate category. Finally, anchors for sheet materials will be completely different, including sheets of drywall, fiberboard and chipboard.

In earthworks, for example, more and more plastic anchors are used instead of metal . These are solid products based on polymer compositions, shock-resistant and frost-resistant. They look like rods 60–120 cm long. A set of such fasteners consists of the anchors themselves, punches and a polyamide cord.

By fastening method

Anchors are mechanical and chemical . The former are easy to install, so they are secured by stress, loads and internal pressure. For example, in the expansion anchor there is a special wedge responsible for expanding the expansion sleeve. And there are also chemical anchors, they additionally use the adhesive force. When fixed, the adhesive based on polyester resins begins to act. Such fasteners are used when you need to fix a particularly heavy structure.

A chemical anchor is also convenient when it is necessary to interact with porous and soft structures . A chemical anchor is usually a standard stud. First, a hole is drilled in the wall, it is important to blow through its walls, they are covered with an adhesive. Then the screw anchor is delivered there.

Unfortunately, chemical fasteners cannot be used right away. You need to wait until the adhesive reaches its full capacity. Such anchors are often used to work on aerated concrete.

By the technique of introduction

Just according to this criterion, bolts can be divided into wedge, driven, screw, as well as spring-type bolts, expanding type, sleeve and spacer bolts. It is stated above that anchors can be anchored mechanically and chemically. Mechanical anchors are divided into several categories according to the type of insertion.

Mortgage . It is fixed in the frame until the moment of concrete pouring or in a stone wall. Such a fastening is based on considerable loads, but the installation is not always simple, and the fasteners themselves are not cheap.

Spacer . The frictional force of the tapered part, which expands with the planned movement of the bolt, provides the connection of this anchor. Which finds use in installing a large system on concrete, brick or masonry. Almost always there are 2 sleeves in a double-expansion anchor, which gives a stronger connection.

Hammer . Its essence is in the spacer of a metal slotted sleeve with a fastening rod hammered into it. This can be done manually or pneumatically. This provides a frictional connection that is very effective when used with solid substrates.

Klinova . This element is constructively very original. It is fixed in the drilled hole by hammering in and screwing in fasteners with a metal sleeve to obtain an optimal resistance indicator. The latter is due to friction. This species can withstand very heavy loads.

Bolt with hook or ring . Another mechanical anchor capable of overcoming not only internal loads, but also external ones. It is used for overhead and cable, hinge and chain systems.

Frame . It can be called a lightweight variation of an anchor bolt used to join plastic objects and wood (the same window frames). It is also suitable for slotted bricks, stone and concrete bases. Its distinctive feature will be the special shape of the head, which levels it and the base surface. The wedging of the connection is carried out with a brass or steel collet.

Stud anchor . This option has 2 fastener rings. It is tightened with a nut. They are used to mount supporting consoles, heavy systems, antennas and cables, and various fences.

Facade . It fixes parts of the curtain walls. This version is equipped with a polyamide sleeve, zinc-plated screw. The head of this screw will press the front cladding with a washer.

Ceiling anchor . This option works almost like a wedge, it has an eyelet. It is a reliable and compact bolt used to fix pendant objects, lamps and chandeliers.

Spring anchor . It is a lightweight fastener designed for thin-walled surfaces. The spring in the bolt unfolds and passes through the hole. It goes on sale right away with a hook or a ring, which is very convenient.

When buying anchors, it is better to ask a sales assistant, specifying the purpose of the purchase. He will advise when a tubular anchor is needed, and when a spiral anchor, whether a folding bolt is really effective in a particular situation, and also what, for example, an end fastener for formwork looks like . The consultant will show you screwdriver anchors as well as special hex head bolts. It is still difficult to distinguish between basalt and nylon elements.

By design

The wedge anchor bolt is required for construction work. This is a metal stud that has a collet sleeve . When the rod starts to screw in, the sleeve grows diametrically and wedges inside the cavity. There is a nut on the thread of such an anchor bolt, and a washer under it. The wedge lock is mounted in a pre-drilled hole, then the nut is tightened with a special key. This fastener adequately "behaves" under increased loads due to its design features.

Let's consider other anchor types and their constructive picture

• Sleeve anchors with nut . They have a fixing sleeve, a wedge-shaped pin. The movement causes the bushing to expand. This fastener is taken when working with lightweight concrete that has a cellular structure.
• Expansion collet bolt . This expanding type is equipped with longitudinal cuts that form petal parts on the surface. They open slightly, changing the section parameter. It is fixed by both friction and a modified base shape.
• Driving bolt for concrete . The spacer sleeve is tapered and has cuts. The sleeve has a wedge that moves when struck into the cavity and expands the sleeve. This type is suitable for concrete / brick.

Once again, it is worth paying attention: today there is a wide variety of types of bolts. Quite often, you need professional advice on a specific issue. In some case, the best solution would be a self-anchoring bolt of the expansion type (for a pipeline, for example), in others - disc anchors (for fixing thermal insulation).

Features of operation

Before attaching the anchor itself, you need to correctly choose both the type of fastener and the size. In this case, the nature and magnitude of the load are taken into account. If there is material on the surface (plaster, for example) that is unable to withstand the anchor, you need to calculate for a longer bolt . That is, the size of the fastener increases by the thickness of that weakest layer.

Installation of the anchor is always accurate marking . After you have to install the anchor, it is almost impossible to pull it back out. The diameter is matched exactly to the hole, the depth too. The finished hole must be cleaned (with air pressure or a vacuum cleaner). And only then, being completely ready for installation, you can tighten the anchor.

With the chemical method of fastening, it is not enough just to choose the right drill, its size, and the hole still needs to be filled with glue . Only then the bolt is inserted, after which it is centered. The installation of anchor fasteners is a definite test of strength, because it is not only to insert and twist, but also to adjust the components of one fastener. And if you manage to choose the right fasteners, adjust the appropriate parameters and get into the markup, everything will turn out accurately and flawlessly.