Sandstone (42 Photos): What Is It? Gray-green And Other Stone, Use In Facing The Facade Of A House, Tiles From This Rock, Polymict And Quartz Sandstone

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

One of the most famous minerals is rightly considered sandstone, which is also called simply wild stone. Despite the general name, it can look very different and has found application in many areas of human activity, thanks to which mankind even began to produce artificial analogs - fortunately, this is not difficult.

What it is?

Actually, the very name "sandstone" speaks of how such a rock appeared - it is a stone that arose as a result of natural compaction of sand. Of course, in fact, sand alone will not be enough - it simply does not occur in nature in a perfectly pure form, and would not form monolithic structures . Therefore, it is more correct to say that for the formation of a granular sedimentary rock, which is a wild stone, cementing admixtures are necessary.

By itself, the term "sand" also does not say anything concrete about the substance from which it is created, and only gives an idea that it is something fine-grained and free-flowing . The basis for the formation of sandstone is mica, quartz, spar or glauconite sand. The variety of cementitious components is even more impressive - alumina and opal, kaolin and rust, calcite and chalcedony, carbonate and dolomite, gypsum and a host of other materials can act as such.

Accordingly, depending on the exact composition, the mineral can have different properties, which are appropriately used by humanity to achieve their own goals.

Origin

Sand compressed under tremendous pressure could exist only in the area that used to be a deep seabed for millions of years. In fact, scientists largely determine by the presence of sandstone how this or that area used to correlate with sea level in different periods of history . For example, it would not be easy to guess that the high Dagestan mountains could once have been hidden under the water column, but the sandstone deposits do not allow doubting this. In this case, the savage usually lies in whole layers, which can be of different thickness, depending on the amount of initial substances and the duration of exposure to high pressure.

In principle, a reservoir is needed at least in order to form the sand itself, which is nothing more than the smallest particles of a coarser rocky rock that succumbed to the centuries-old onslaught of water . Scientists believe that it was this process, and not the actual pressing, that took up the maximum time in the process of "production" of the wild stone. When individual grains of sand settled on those areas of the bottom that were never disturbed by currents, it took "only" several hundred years to form a stable sandstone stone.

Sandstone has been known to mankind since ancient times, primarily as a building material . Probably the most famous world attraction built from the "savage" is the famous sphinx, but it is also used to build numerous buildings in various ancient cities, including the notorious Palace of Versailles. The widespread distribution of wild stone as a popular building material became possible precisely due to the fact that the map of the oceans and continents has repeatedly changed during the development of the planet, and today many areas considered the heart of the continent are in fact familiar with the sea much better than one can imagine. introduce. For example, the Kemerovo and Moscow regions, the Volga region and the Urals can be considered large centers for the extraction of this mineral.

There are two main ways to mine sandstone, which are not interchangeable - each is tailored for a specific type of mineral . For example, the harder varieties based on quartz and silicon are usually exploded with powerful charges, and only then the resulting blocks are cut into smaller slabs. If the formation was formed on the basis of softer calcareous and clayey rocks, then the extraction is carried out using an excavator method.

The extracted raw materials in production conditions are cleaned of impurities, grinded and polished, and for a more aesthetic look they can also be varnished.

Structure and properties

Since sandstone from different deposits may not have many similarities, it is rather difficult to describe it as something coherent. It has neither a certain standard density, nor the same stable hardness - all these parameters are difficult to designate even approximately, if we speak on the scale of all deposits in the world. In general, the run-up of characteristics looks something like this: density - 2, 2-2, 7 g / cm3, hardness - 1600-2700 kg / cubic meter.

It is only worth noting that clayey rocks are valued quite low, since they are very loose, cannot withstand the effects of open street conditions for too long and are easily destroyed. From this point of view, quartz and silicon varieties of wild stone look much more practical - they are much stronger and can be used for the construction of durable objects, a good proof of which will be the already mentioned sphinx.

By the same principle, sandstone deposits can be of a wide variety of shades, and although the palette should be approximately the same among the raw materials mined at the same deposit, two pieces of mineral can in no way be the same - each has a unique pattern. This is possible due to the fact that during the formation of any "savage" foreign impurities inevitably fell into the "mixing vat", and always in different compositions and proportions . At the same time, for finishing purposes, in which today sandstone is used as often as possible, the most relevant fragments are those that have the most uniform shade.

Despite the impressive variety of stone variations, it is still considered to be the same mineral, and not different

This point of view is supported by a decent list of positive qualities for which sandstone is valued - to one degree or another, they are inherent in raw materials from all known deposits.

Walking through them is worth at least for general development, because the "savage":

• can last for a good half of a century, and on the example of a sphinx erected from sandstone, we see that sometimes such material does not wear out at all;
• a wild stone, from a chemical point of view, is considered an inert substance, that is, it does not enter into chemical reactions with anything, which means that neither acids nor alkalis are capable of destroying it;
• sandstone decoration, as well as buildings built from this material, are 100% environmentally friendly, because it is a natural material without any artificial impurities;
• unlike some more modern materials, sandstone blocks and slabs do not accumulate radiation;
• the savage is able to "breathe", which is good news for those owners who know why excessive humidity in enclosed spaces is bad;
• due to some porosity of the structure, sandstone has a low thermal conductivity, which means that in winter it helps to preserve heat in the house, and in summer, on the contrary, it gives a pleasant coolness to those who hid from the heat behind sandstone walls;
• a wild stone is indifferent to the effects of most atmospheric phenomena, it is not afraid of precipitation, extreme temperatures, or even their extreme changes - studies have shown that even a jump from +50 to -30 degrees does not in any way affect the material's preservation of its positive properties.

It should be noted that today, sandstone is practically no longer perceived as a building material itself, but rather belongs to the category of finishing materials, and it is from this point of view that we considered its properties above . Another thing is that for sandstone fragments a completely different application is found - for example, wild stone is actively used in lithotherapy - a paramedical science, which believes that applying heated sandstone to certain points of the body and massage them helps to solve many health problems. Among the ancient Egyptians, the material had a sacred meaning at all, and lovers of esotericism still see a deep secret meaning in sandstone crafts.

A separate property of the breed, which largely influenced its millennial use by mankind, even despite the rapid progress, is the cheapness of such raw materials ., because a cubic meter of the cheapest material costs from 200 rubles, and even the most expensive variety will cost a modest 2 thousand rubles.

At the same time, it is practically impossible to find fault with the best samples of sandstone, because the only significant drawback of a wild stone is its significant weight.

Views

Describing the variety of varieties of sandstone is another challenge, given that each deposit has its own wild stone, unique. but precisely because of this diversity, it is necessary at least briefly to go through the main characteristics of individual species, so that the reader has a clearer idea of what to choose from.

By material composition

If we evaluate sandstone by composition, then it is customary to distinguish six main varieties, which are distinguished by the criterion of what kind of substance became the raw material for the formation of sand, which eventually formed the material. It should be understood that the mineral that you buy in the store may be completely artificial, but the classification refers specifically to natural varieties. In general, the list of sandstone species according to the mineralogical classification looks like this:

• glauconite - the main material of the sand is glauconite;
• tuffaceous - formed on the basis of rocks of volcanic origin;
• polymictic - formed on the basis of two or more materials, due to which more subspecies are distinguished - arkose and graywacke sandstones;
• oligomicty - contains a decent amount of quartz sand, but always interspersed with spar or mica;
• monomictovy - also made of quartz sand, but already practically without impurities, in an amount of 90%;
• cuprous - based on sand saturated with copper.

To size

In terms of size, sandstone can be classified even as rough - by the size of the grains of sand that formed the mineral. Of course, the fact that the fraction will not always be homogeneous will bring some confusion into the sorting, but still there are three main classes of such material:

• fine-grained - from the smallest compressed grains of sand with a diameter of 0.05-0.1 mm;
• fine-grained - 0.2-1 mm;
• coarse-grained - with grains of sand from 1, 1 mm, usually they do not exceed 2 mm in the structure of the stone.

For obvious reasons, the fraction directly affects the properties of the material, namely, its density and thermal conductivity . The pattern is obvious - if a mineral was formed from the smallest particles, then there will be no room for voids in its thickness - they were all filled due to pressure. Such material will be heavier and stronger, but thermal conductivity will suffer due to the absence of air-filled voids. Accordingly, coarse-grained varieties have the opposite features - they have an abundance of voids, which makes the block lighter and more heat-saving, but reduces strength.

When purchasing, the seller will describe the material and according to one more criterion - the sandstone can be natural and tumbling . The first option means that the raw material has already been divided into plates, but no one was involved in further processing, that is, there are irregularities, chips, burrs, and so on on the surface. Such material usually requires further processing to make its surfaces smooth, but roughness and "naturalness" can be regarded as a plus in terms of decorativeness. In contrast to natural stone, it is tumbled, that is, it has undergone tumbling (grinding and polishing) with the elimination of all irregularities.

Such raw materials already correspond to the concept of a finishing material in the full sense and represent a neat tile, often lacquered.

By color

The popularity of sandstone as a material for construction and decoration was also brought about by the fact that, in terms of the richness of the palette, it practically does not limit the consumer in any way, and, on the contrary, makes the latter doubt which option to choose. Nature has dozens of shades to choose from - from white to black through yellow and amber, beige and pink, red and gold, blue and blue . Sometimes the chemical composition of the mineral can be immediately determined by the shade - for example, the blue-blue palette indicates a significant copper content, gray-black is characteristic of rocks of volcanic origin, and pink tones are characteristic of arkose varieties.

And if shades like red or gray-green are quite understandable for the buyer, then there are more exotic descriptions of the palette and pattern that may need additional decoding .e. So, the popular woody tone of sandstone is an amazing and unique pattern of streaks of beige, yellow and brown shades. Accordingly, the tiger tone corresponds to the animal after which it is named - it is black and orange alternating stripes.

Applications

A decent variety of physical and aesthetic properties of sandstone, as well as its almost ubiquitous availability have led to the fact that this material is widely used in various spheres of human activity. At one time, for example, sandstone was even used as the main building material, but today it has passed somewhat in this direction, since it gave way to lighter, more reliable and durable competitors. However sandstone construction is still underway, it's just that wild stone was taken out of massive, large-scale construction - now it is more relevant for small private buildings.

But thanks to its aesthetic qualities, sandstone is widely used in decoration and decoration. For some, this is the facing of the facade of a house or a stone fence, while others are tiling sidewalks or garden paths.

The steps are laid out with slabs, and paving stones are made of natural stone, and they also decorate the bottom and coast of artificial reservoirs.

Considering that the material is not flammable and is not very afraid of high temperatures, sandstone fireplaces can also be found in everyday life, and sometimes window sills made of this material come across . For beauty, whole panels are laid out from multi-colored pebbles, which can become the central element of the interior of the room in which you can receive guests. At the same time, sandstone chips can be used as spraying to create chic embossed wallpaper or for less elevated purposes - as a filler for plaster, concrete, and so on.

With its not the lowest strength, sandstone is still considered a material that is quite easy to process, therefore it is not surprising that it is also used simply for crafts, albeit professional. It is from this material that many garden sculptures are made, as well as underwater and surface decorations for fountains, ponds and aquariums . In the end, small fragments of wild stone are also used for really small handicrafts, including as jewelry - polished beads and bracelets are made from beautiful colored fragments.