Crushed Gravel (30 Photos): 5-20 Mm, 40-70 Mm And Other Fractions Of Crushed Stone From Gravel. What's This? Its Differences From Granite And Other Rubble In Bags

Table of contents:

Video: Crushed Gravel (30 Photos): 5-20 Mm, 40-70 Mm And Other Fractions Of Crushed Stone From Gravel. What's This? Its Differences From Granite And Other Rubble In Bags

Video: Crushed Gravel (30 Photos): 5-20 Mm, 40-70 Mm And Other Fractions Of Crushed Stone From Gravel. What's This? Its Differences From Granite And Other Rubble In Bags
Video: Comparing Crushed Rock (& Gravel) Sizes and How They're Used 2024, March
Crushed Gravel (30 Photos): 5-20 Mm, 40-70 Mm And Other Fractions Of Crushed Stone From Gravel. What's This? Its Differences From Granite And Other Rubble In Bags
Crushed Gravel (30 Photos): 5-20 Mm, 40-70 Mm And Other Fractions Of Crushed Stone From Gravel. What's This? Its Differences From Granite And Other Rubble In Bags
Anonim

Crushed gravel refers to bulk materials of inorganic origin, it is obtained during crushing and subsequent screening of dense rocks. In terms of cold resistance and strength, this type of crushed stone is somewhat inferior to granite, but significantly outperforms slag and dolomite. The main area of application of such material is the construction of buildings and structures, the production of reinforced concrete structures and road works.

Image
Image
Image
Image

What it is?

Crushed gravel is a non-metallic natural component. In terms of strength, strength and resistance to external adverse influences, it lags slightly behind granite crushed stone, but significantly ahead of limestone and secondary ones. Its receipt includes several stages:

  • extraction of rock;
  • splitting up;
  • fractional screening.
Image
Image

Crushed gravel is mined in quarries by explosion or rises with sand from the bottom of reservoirs (lakes and rivers) … After that, cleaning is carried out, and then, through an apron or vibrating feeder, the raw mass is fed to crushing.

This is one of the most important processes at the entire stage of production, since the size of crushed stone and its shape depend on it.

Image
Image
Image
Image

Crushing takes place in 2-4 stages. To begin with, use auger crushers, they crush the rock . At all other stages, the material passes through rotary, gear and hammer crushers - the principle of their operation is based on the impact of a stone mass on a rotating rotor with baffle plates.

Image
Image

At the final stage of production, the resulting crushed stone is divided into fractions . For this, stationary or suspended screens are used. The material progressively passes through several separately located sieves, in each of them bulk material of a certain fraction is separated, starting from the largest to the smallest. The output is gravel crushed stone that meets the requirements of GOST.

Image
Image

The strength of crushed gravel is lower than that of granite . However, the latter has some background radiation. It is safe for humans, however, the material is not recommended for use in the construction of residential buildings, children's and medical institutions. That is why crushed gravel is preferred in residential and social construction. Its radioactive background is zero, the material is highly environmentally friendly - as it is used, it does not emit any harmful and toxic substances. At the same time, it costs less than granite, which leads to a high demand for this rock in the construction of objects of various purposes.

Image
Image
Image
Image

A large number of impurities are distinguished from the disadvantages of crushed gravel. So, typical crushed stone contains up to 2% of weak rocks and 1% of sand and clay . Accordingly, a pillow of such a bulk material 1 cm wide can withstand temperatures up to -20 degrees and a weight load of up to 80 tons. In more severe conditions, the rock begins to collapse.

Image
Image

Many people believe that gravel and crushed gravel are the same thing . Indeed, these materials have a common origin, but there are significant differences between them. The difference is explained by the methods of extraction of raw materials, which largely determine the technical, operational and physical parameters of bulk material. Crushed stone is obtained by crushing hard rock, therefore its particles always have corners and roughness. Gravel becomes a product of natural destruction of rocks under the influence of wind, water and sun. Its surface is smooth and the corners are rounded.

Image
Image
Image
Image

Accordingly, gravel crushed stone has a higher adhesion to the elements of the mortar, it is better rammed and fills all voids well when backfilling. This leads to the widespread use of crushed stone in construction work. And here it does not represent decorative value, therefore, in landscape design, preference is given to colored pebbles - it is presented in a variety of shading options and looks very impressive.

Image
Image
Image
Image

Main characteristics

Crushed gravel is of high quality, its technical and operational parameters correspond to GOST

  • The strength of the rock corresponds to the M800-M1000 marking.
  • Flakiness (particle configuration) - at the level of 7-17%. This is one of the most important parameters when using bulk materials in construction. For gravel crushed stone, the shape of a cube is considered the most demanded, others do not provide a sufficient level of adhesion of particles and thereby worsen the parameters of the density of the embankment.
  • Density - 2400 m / kg3.
  • Cold resistance - class F150. It can withstand up to 150 freeze and thaw cycles.
  • The weight of 1 m3 of crushed stone corresponds to 1.43 tons.
  • Belongs to the first category of radioactivity. This means that crushed gravel can neither emit nor absorb radiation. According to this criterion, the material significantly surpasses the granite options.
  • The presence of clay and dust components usually does not go beyond 0.7% of the total strength parameters. This indicates the maximum susceptibility to any binders.
  • The bulk density of crushed stone of individual parties is almost the same. Usually it corresponds to 1, 1-1, 3, in some cases it can be less. This characteristic largely depends on the origin of the raw material.
  • Presented in one color scheme - white.
  • It can be sold uncleaned or washed, sold in bags, delivery in bulk by machine is possible on an individual order.
Image
Image

Fractions and types

Depending on the field of gravel crushed stone, the material has its own characteristics that must be taken into account during the construction process.

In terms of particle size, crushed stone is divided into three large categories:

  • small - grain diameter from 5 to 20 mm;
  • average - grain diameter from 20 to 70 mm;
  • large - the size of each fraction corresponds to 70-250 mm.
Image
Image

The most used in the construction business is considered to be fine and medium-sized crushed stone. Large fraction material has a specific application, mainly in landscape gardening design.

Image
Image

According to the parameters of the presence of lamellar and needle pebbles, 4 groups of gravel-sand crushed stone are distinguished:

  • up to 15%;
  • 15-25%;
  • 25-35%;
  • 35-50%.

The lower the flakiness index, the higher the cost of the material.

Image
Image

The first category is called cuboid . In the composition of the embankment, such crushed stone is easily rammed, there is little space between the granules and this significantly increases the reliability of solutions and the durability of products made using crushed stone.

Image
Image
Image
Image

Stamps

The quality of crushed stone is evidenced by its brand, it is assessed by the reaction of the grains to any external influences produced.

By fragmentation. The crushing of grains is determined in specialized installations, where a pressure corresponding to 200 kN is applied to them. The strength of crushed stone is judged by the loss of mass that has broken away from the grains. The output is material of several types:

  • М1400-М1200 - increased strength;
  • М800-М1200 - durable;
  • М600-М800 - medium strength;
  • М300-М600 - low strength;
  • M200 - reduced strength.
Image
Image

Crushed gravel produced in compliance with all technologies is classified as M800-M1200.

Image
Image
Image
Image

Cold resistance . This marking is calculated on the basis of the maximum number of freeze and thaw cycles, after which the weight loss does not exceed 10%. Eight brands are distinguished - from F15 to F400. The most resistant material is considered to be F400.

Image
Image

By abrasion . This indicator is calculated by the loss of grain weight after rotation in a cam drum with the addition of metal balls weighing 400 g. The most durable material is marked as I1, its abrasion does not exceed 25%. Weaker than the rest are crushed stone of grade I4, in this case the weight reduction reaches 60%.

Image
Image

Applications

Crushed gravel has exceptional strength parameters, long service life and high adhesion. Such crushed stone is widely in demand in the industrial sector, agriculture, and also in everyday life.

Image
Image

The main areas of application of crushed gravel are as follows:

  • landscape design;
  • production of reinforced concrete structures, filling of concrete mortars;
  • filling of runways, foundations of highways;
  • installation of building foundations;
  • filling of railway embankments;
  • construction of road shoulders;
  • creation of an air cushion for playgrounds and parking lots.
Image
Image
Image
Image

Features of use directly depend on the faction

  • Less than 5 mm. The smallest grains, they are used for sprinkling icy roads in winter, as well as for decorating local areas.
  • Up to 10 mm. This crushed stone has found its application in the manufacture of concrete, installation of foundations. Relevant when arranging garden paths, flower beds, alpine slides.
  • Up to 20 mm. The most demanded building material. It is popular for pouring foundations, producing high quality cement and other building mixtures.
  • Up to 40 mm. It is used when performing foundation work, creating concrete mortars, arranging efficient drainage systems and installing subfloors.
  • Up to 70 mm. It is in demand mainly for decorative purposes, it can be used in road construction as a basis for parking lots, parking lots and highways.
  • Up to 150 mm. This fraction of crushed stone was named BUT. Quite rare material, relevant for the design of rockeries, swimming pools, artificial ponds and garden fountains.
Image
Image

Summarizing all the information presented, we can give the following estimates of the operational parameters of gravel crushed stone:

  • Price . Crushed gravel is much cheaper than its granite counterpart, at the same time it retains a fairly high quality and finds widespread use in the construction industry.
  • Practicality . The material is used in a wide variety of industries, from the manufacture of concrete to the construction of buildings and structures.
  • Appearance . In terms of decorativeness, crushed stone loses to gravel. It is angular, rough and comes in only one shade. Nevertheless, small- and large-fraction breeds can be used in landscape gardening design.
  • Ease of operation . The material does not need any additional processing, its use begins immediately after purchase.
  • Environmental friendliness . Crushed gravel does not contain any harmful impurities, its origin is 100% natural.

Recommended: