Euroruberoid: Types And Characteristics, Self-adhesive And Liquid. Technology For Laying Euroruberoid On The Roof, Instructions, Roll Dimensions

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10

Currently, when designing roofing, sheathing of various building structures, euroruberoid is used. In addition, it can act as a reliable waterproofing material. Today we will talk about its main features, as well as what types it can be.

Difference from roofing material

Euroruberoid has a number of important characteristics that distinguish it from a simple roofing material. Let's consider each of them separately.

This roofing material does not include cardboard; instead, fiberglass or fiberglass is most often used, sometimes fiberglass is also taken

In addition, the upper part of the euroruberoid is made with a special impregnation, consisting of polymer components. In the production process, such material is coated on both sides with a special binder, which is created on the basis of bitumen and various technological additives.

Such a waterproofing base has a relatively low cost, so it will be affordable for almost any buyer. A special granular coating (shale or sand) acts as a protective layer.

Types and their characteristics

Euroruberoid can be of several basic types

Liquid . This variety is created on the basis of liquid rubber. It is the easiest to install as it does not need to be heated. In addition, this type is particularly durable, it can last for many years and even decades. The maximum strength and reliability of the base is achieved due to the content of bitumen, special plasticizers, mineral additives, polymers and rubber in the composition. In case of damage, it will be easy to carry out repair work, the damaged area is quickly removed. Often, liquid euroruberoid is used to create the entire roofing structure completely. But it should be noted that this species has a higher price compared to other varieties.

Weldable . This material can only be used after the bottom has melted. In its production, a special bitumen-polymer substance is taken as a basis, which is poured onto a base made of fiberglass or polyester. The upper protective layer of this euroruberoid will not need to be melted and applied with construction mastic. The deposited type can be used in any climatic conditions. Often it is this material that is taken to insulate large reinforced concrete slabs.

Uniflex . This bitumen-polymer roofing material is often used as one of the layers of the roofing cake. The coating contains artificial rubber. It is the latter that provides the maximum indicators of frost resistance and heat resistance of the base. Sometimes it is purchased to create a waterproofing structure. Uniflex is also divided into 3 separate types: bottom, top and special for ventilated roofing. The first option is created without granular dressing, it is it that is most often used when creating waterproofing. The second option has a special coating, it can be used as an independent roof. The third option can be taken for the device of the roofing cake.

Self-adhesive . This euroruberoid is used when working with concrete, wood and steel. The service life of such material is no more than 10 years. To glue the material, you just need to carefully remove the film, roll out the roll over the surface. The color of such roofing material is most often dark gray.

Dimensions and shape

As already noted, euroruberoid can be in liquid form. This material is quite easy to apply . It is sold in sealed containers. Often in the process of construction work, such a composition is sprayed using spray guns.

The most common option is rolled euroruberoid . It is as simple as possible to lay it on almost any substrate. To do this, you just need to roll it onto a prepared surface.

The sizes of roll models may also vary . Products with values of 10x1, 15x1 m are often found.

Appointment

Most often, euroruberoid is used to cover the roof, to provide proper waterproofing. Moreover, even one layer will be enough during its installation. Wherein such a roof will turn out to be as reliable and fireproof as possible.

In addition, this product is widely used when it is necessary to cover large areas and various outbuildings, garages. Some varieties are used as a special lining under a multi-layer roofing cake.

Laying technology

Almost any person can lay such material without the help of professionals. If you purchased a liquid composition, then you must first dilute it - as a rule, all proportions are indicated in the instructions. It should acquire good fluidity. As diluents, special components are used, including carbon substances.

After that, you will need to prepare the surface on which the material will be laid. It is thoroughly cleaned of all contaminants. Then you should make a primer with a special primer and preliminary fitting.

The resulting composition is not recommended for hot application. For that to apply euroruberoid to the structure, you can use various painting devices , you can also take a spray bottle. For even distribution of the composition, you can use a special rubber squeegee.

If you are laying roll material, then you can use a blowtorch . At the same time, the bottom layer and the base are heated, and then the product is rolled out with an overlap. In this form, everything is pressed as tightly as possible by the roller. In this case, the seams are once again well warmed up and again processed with a roller, this is done in order to make the coating completely sealed.