Corner Asymmetric Baths (84 Photos): Sizes Of Acrylic Products, 170x90 And 120x120, 150x90 And 120x90

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Corner baths are rightly considered structures that can be placed in a small-sized bathroom, while freeing up useful space in it. In addition, the unusual model will decorate the interior, making it not only functional, but also original.

Distinctive features

Corner baths are located between the perpendicular walls of the bathroom, "standing" in the corner. They are distinguished by their ergonomics and are especially convenient in small bathrooms, since they free up useful space.

Such models can be equilateral or versatile . The latter are called asymmetric. They can have a variety of shapes, but at the same time they are always spacious and ergonomic. The basis of the bowls under consideration is acrylate-based polymers. Modern acrylic baths usually contain additives that provide biostability and antibacterial properties of devices.

There are 2 technologies for the production of acrylic bowls

• Made of acrylic sheet . Such structures are more durable and reliable, their service life is 10-12 years.
• Extruded acrylic . These are less durable and durable models. Moreover, in a number of European countries, such products are unacceptable to be used in structures in contact with the human body. This becomes a reason to think not only about the technical imperfections of the material, but also about its environmental safety.

Acrylic itself does not differ in strength, especially if its multiple bending is meant, therefore, in the manufacture of bathtubs, it is reinforced with polyester resins coated with fiberglass or polyurethane foam. The second option is more environmentally friendly.

The result is a reliable material with good sound and heat insulation performance . This means that such a bath does not rattle when drawing water (as happens with metal counterparts), and also retains heat. A water-filled acrylic hot tub cools down slowly - just 1 degree in 30 minutes. The surface of the bathtub is smooth and pleasant to the touch.

Due to the plasticity of the material and the peculiarities of the technology, it is possible to create bowls of various and intricate shapes. As for the color, both classic snow-white and colored fonts are available to customers.

The disadvantage of acrylic bowls is the fragility of their top layer, so they must be protected from mechanical damage.

Asymmetric models can be equipped with a hydromassage system , shower panels, the option of aromatherapy, chromotherapy, have illumination or special recesses that follow the anatomical features of the body, as well as silicone headrests and handles.

The most popular option is the hydromassage effect, which is provided by the presence of jets. From them, streams of water or water-air jets are supplied under pressure, providing a massage effect. This massage improves blood circulation and provides a cosmetic effect.

Advantages and disadvantages

Asymmetric bathtubs have the following advantages.

• Practicality due to the antibacterial and self-cleaning ability of the material, as well as its resistance to corrosion.
• Safety, since the coating does not slip, does not emit hazardous substances.
• Light weight (about 30-40 kg), providing ease of transportation and installation, as well as the ability to mount the bowl in houses with wooden and dilapidated floors.
• High sound and heat insulation qualities.

• Unusual design, variety of shapes.
• Ease of use - most models have a wide shelf with rims on which you can place shower products, soaps and shampoos.
• Ergonomic
• Easy to clean, eliminating the use of abrasive cleaners.

The disadvantage of acrylic bowls is the fragility of the outer layer, which cracks under the influence of mechanical damage. In addition, the angular design involves the use of special supports to ensure the strength of the bowl.

Asymmetrical corner bowls turn yellow over time. You can avoid this by choosing a color model, or fix a damaged version using the bath restoration service.

Dimensions (edit)

The main criterion for choosing the size of the bathtub is the dimensions of the bathroom. First of all, it is necessary to carry out careful calculations, and then decide on the appropriate size of the font. To do this, it is recommended to create a drawing of a bathroom in a convenient format, transferring the drainage features, water supply wiring to it, and also indicate the exact location and dimensions of the rest of the equipment, furniture, household appliances.

If the bathroom is small enough, then you should not choose too complex asymmetric models . - their edges will "eat up" the free space. The dimensions of the bowl are determined by its length and width. For equilateral corner models, the optimal bowl size is 140x140 or 150x150 cm. Based on this, it can be assumed that asymmetric models, the length of which is 140 or 150 cm, are considered to be the most "popular" sizes. 140x70, 150x70 and 150x75 cm.

Five and hexagonal models in small rooms usually look ridiculous . Their use is irrational in terms of overall dimensions. They look much more attractive in spacious bathrooms of private houses. Here they look like small pools, and their length can be 180 cm or more, and their width is 110-160 cm.

Depending on the size of the bowl, angular asymmetric structures can be conditionally divided into 3 types.

Miniature

Their size is 120x70 cm, which makes it possible to use such models in small bathrooms. In some instances, the length of the device can reach 130 cm. As a rule, such baths have an increased width. The optimal size of such bowls is 130x70 and 130x80 cm.

For square-shaped bathrooms, you can purchase a bathtub measuring 120x90 or 130x100 cm . Installation of a larger bowl is impossible here, since you will have to abandon the use of the sink and reduce the free area, while the bowl of the declared dimensions allows you to place everything you need in the room. Another advantage of miniature devices is economical water consumption. The disadvantage is that it will not be possible to lie down while taking a bath. In terms of the volume of the bowl, such designs are almost the same as the volume of equilateral fonts with dimensions of 100x100, 110x110 and 120x120 cm.

Standard

These baths differ from the previous ones in their large size - 150x70 cm. They fit into most of the bathrooms of typical high-rise apartments. Taking a bath can help you get into a more comfortable half-sitting position. The presence of hydromassage, built-in armrests or silicone "pads" makes the procedure more pleasant. Spacious baths 150x90, 160x90 cm are also considered standard.

Oversized

The length of such products starts from 170 cm and can be up to 200 cm. Baths of 170x90 cm are considered "running" in this segment. They are intended for spacious bathrooms. At the same time, some models remain quite compact (for example, bowls 170x50 cm) or may outwardly resemble mini-pools (products 170x110 cm).

Separately, it is worth highlighting the seated corner structures, the dimensions of which are smaller than the dimensions of their miniature counterparts . Often their length is less than 90 cm, and their width is less than 70 cm. Such structures are usually installed for the elderly and disabled. You can take a bath in them while sitting. For convenience, they have a seat in the bowl.

The optimum depth is 50-60 cm. This distance is measured from the bottom of the bath to the overflow hole. Usually imported models have a shallower depth compared to domestic ones.

The shape of an asymmetrical bath often defies description.

In general, the following popular configurations are distinguished:

• trapezoid;
• the shape of the month, cut drop or heart;
• with one beveled or rounded corner;
• shapes resembling a rectangle or square, but having an angle of more or less than 90 degrees.

Baths for two deserve special attention, which, as a rule, are equipped with a hydromassage system. Such designs have the form of a heart, in the recesses of which the armrests for the head are located. Such designs take up a lot of space. An alternative for small bathrooms are baths for two, shaped like an infinity sign with a drain hole in the center of the bowl.

Popular models

One of the best manufacturers of acrylic bathtubs is considered Czech brand Ravak … In its assortment there are many asymmetric corner models made of sheet acrylic 5-6 mm thick, reinforced with fiberglass. This ensures the strength and durability of the products (10-year warranty). The specified wall thickness is sufficient for installation in the bowl of a hydromassage system. The advantage is the variety of models and shapes, as well as the ability to choose the same bowl in several sizes (for large and small rooms). The disadvantage is the high cost, however, it is completely leveled by the high quality and long service life of the font.

Bowls are no less popular Polish brand Cersanit … However, for the production of bowls, a sheet of acrylic with a thickness of 4 mm is used. This affects the life of the product - it is 7 years.

Another European manufacturer that produces bathtubs with a wall thickness of less than 5 mm is Kolo brand (Poland). The manufacturer says about a 3-year warranty, but users claim that the bathtub will last 7-10 years without changing its technical and visual characteristics. In general, the products are characterized by reliability and durability, however, too thin walls become the reason for the refusal to install a hydromassage system in the bathroom.

And here are the baths Dutch company Riho on the contrary, they are characterized by a maximum thickness - from 6 to 8 mm, depending on the model. This provides a good margin of safety, durability of the models, as well as their higher cost.

Asymmetric premium acrylic bowls are available in German (Villeroy & Boch), French (Jacob Delafon) and Italian (BelBagno) companies … They are distinguished not only by their strength, safety and elegant design, but also by the use of modern technologies in the production of sanitary ware. Thus, the German manufacturer Villeroy & Boch was one of the first to produce bowls based on quaril. Kvaril is a modification of acrylic, which contains quartz sand, which ensures greater product reliability.

Russian brands also win the trust of buyers. Among them - Aquanet firm , specializing in the production of acrylic bowls for about 10 years. The thickness of the acrylic layer is 5 mm. Some models are equipped with head rests, armrests, which makes bathing more comfortable. The surface of the bowl is pleasant to the touch (no seams or defects). It keeps the water temperature perfectly. Among the "minuses" of the product is a short warranty period of one year. In addition, there are many reviews on the network indicating the low quality of the drain system. At the same time, it is not sold separately - it must be changed completely by purchasing a drain-overflow kit, which is quite expensive.

If you are looking for the most useful hydromassage system, pay attention to the asymmetric corner models of the Spanish production the Pool Spa brand … The type and location of the nozzles in such bowls exactly correspond to medical recommendations, thereby allowing you to get the maximum recovery from the procedure. Most models are equipped with a water jet system, highlighted in different colors. Light rays are supplied with different frequencies, have different durations, which contributes to relaxation, restoration of psychological balance. Since the manufacturer is focused on the production of hydromassage bowls, there is no need to worry about the strength and thickness of the walls of the bath. The latter is 6-8 mm. The lack of designs is high cost.

If you are looking for cheaper models, pay attention to the hydromassage corner brands from domestic manufacturers. Among the manufacturers working with acrylic sheet - companies "1Marka" and "H2O " … Their products are distinguished by their durability, variety of shapes and sizes, and the presence of several hydromassage modes. Baths "1Marka" have a 10-year manufacturer's warranty. Such a long warranty period is a rarity for models of domestic companies.

When buying a bath, it is important to understand that a high-quality asymmetrical model cannot be cheap. So, the minimum price for a bowl from a European manufacturer ranges from 15,000-17,000 rubles, a domestic one - from 13,000 to 15,000 rubles. Please note that the minimum cost is set for standard bowls. So, for a similar device with hydromassage, the average price starts from 22,000-25,000 rubles.

Too low a price usually indicates that this is a plastic model that has an acrylic coating with a thickness of no more than 1 cm. Such a bathtub does not withstand the weight load and is easily deformed. You should refuse to buy it.

The premium segment baths from Jacuuzzi, Villeroy & Boch and Jacob Delafon brands … When buying premium models, you can choose any reputable manufacturer, focusing on personal preferences and design dimensions. True, it is these bathtubs that are most often counterfeited, so before buying it is important to make sure of the originality of the product.

The most purchased mid-price baths are products from Riho, Ravak. Available models include Triton, 1Marka, and Riho (along with more expensive collections, there are fairly affordable products in some lines).

How to make a choice?

When you have decided on the size and shape of the bowl, ask the sellers for certificates confirming the high quality and originality of the products. This is due to the fact that asymmetric corner fonts are more often forged than others - negligent manufacturers use plastic, which is covered with a thin layer of acrylic. Such a device will last no more than 2-3 years.

You can verify the quality and sufficient wall thickness with a flashlight . You should turn it on and attach it to one of the walls. If it does not show through (the beam from the flashlight will not appear on the other side of the wall), you can continue to inspect the model. The optimal thickness of the sides of the bath is considered to be 6-8 mm. In any case, it must be at least 5 mm.

Press on the bottom and sides of the bath - they should not "play" and fall through. This indicates a fake product or insufficient reinforcement. Tap the surface of the bathtub. The sound should be muffled and the same in all parts.

Products that are overly complex are usually less durable than counterparts of simpler shapes. This is due to the fact that the more curved and multifaceted the bowl, the more difficult it is to reinforce it. As a rule, the service life of asymmetric baths of complex configuration is 7-8 years.

Pay attention to the surface - it should be smooth, uniform (no chips or damage) . There should be no chemical smell or plastic smell from the bathtub. This is usually evidence of a forgery.

When buying an asymmetric model, pay attention to whether it is right-handed or left-handed. The choice is due to the side of the communication pipes in the bathroom.

If a frame is not provided with the bathtub, you should purchase it separately or make a stand for the bowl yourself. When buying a frame, pay attention to the quality of welding, it is necessary to have an anti-corrosion coating.

The frame should be a frame structure that matches the shape of the bowl. Its corners must be set on supports, which guarantees the rigidity of the structure. Adjustable legs are attached to the frame structure. The frame must have a complex shape. If these are just frames under the sides of the bowl, you should refuse to purchase a set.

There are several types of frame

• A frame that follows the shape of the bathtub and has a lower part designed for the weight of a person and water. The structure in this case is not fixed under the sides of the bath, since the strength of the latter is provided by reinforcement. A reliable base, which is usually equipped with high quality bathtubs.
• A frame that supports the sides of the bathtub and has adjustable legs. Usually, the frame is based on a U-shaped profile. Such a frame is considered more difficult to install, but also more durable.
• Square profile frame designed for asymmetric hydromassage bowl. This base is a structure that supports the sides of the bathtub and allows the weight of the load to be evenly distributed along its bottom. Has several points of support on the floor.

When choosing a whirlpool bowl, make sure it is equipped with a compressor, pump and nozzles . It is good if the device has an automatic cleaning system. This is not an obligatory element of the complete set, however, it provides increased hygiene of the procedure. The nozzles should be located in the neck, back, lower back, legs along the massage lines. It is good if they are located not only horizontally, but also vertically - this will provide a better massage. These parts should not protrude from the bowl or otherwise cause discomfort.

Nozzles are extremely sensitive to water quality, so if you don't want to regularly clean and change them due to deposits, take care of a multi-stage cleaning system. To do this, you should purchase special filters and accessories for their installation, as well as softening systems (salt granules, for example).

Consider the following factors when choosing bowl sizes:

• bathroom area;
• the presence of other plumbing and furniture in it;
• the size of the area in front of the bathroom, free of plumbing and furniture;
• the distance from the bath to the door must be at least 70 cm;
• the location of the sewer pipes (this factor is not decisive, but given it, it is possible to simplify the process of water supply).

Select a bathtub, taking into account the weight and dimensions of the largest member of the family. Do not hesitate to "try on" the cup by climbing into it in the store.

Bathroom preparation

First of all, it is necessary to turn off the water supply, and then dismantle the old device - disconnect pipes and hoses, unscrew the legs. When it comes to old Soviet baths, their legs and side walls are often cemented. A hammer and a chisel will help to beat them off. After the bath is dismantled, you should level the surface of the walls and floor, remove dust and dirt from the work surfaces.

It is important to make sure that the sewer system is in good working order, its suitable location. It is optimal if the pipe rises above the floor by no more than 10 cm. After leveling the floor, you can lay the floor covering, the walls should also be leveled and covered with a non-absorbent material, for example, paint.

Installation subtleties

Bath installation is carried out in several stages.

• It is necessary to assemble a metal frame, after which, focusing on its dimensions, make a markup of the walls in the bathroom. Usually the assembly process is straightforward if you follow the attached instructions.
• After assembling the frame, a bathtub is placed in it, and then the whole structure is moved to the wall. At this stage, it is important to make sure that the drain holes are compatible, the stability of the bowl.
• The drain and the drain are connected, the sides of the bath are fixed to the wall.
• Cold and hot water supply is connected, if necessary, a mixer is mounted on the side of the bathroom.
• The tightness of the joints of the bath and the wall is checked. You can eliminate cracks using curb tapes, a silicone gun, plastic skirting boards. The latter are usually attached with silicone glue or liquid nails.

If the frame is not provided with the bathroom and it is not possible to purchase it separately, you can make a support under the bowl with your own hands. Usually, foam concrete blocks or bricks are used for mounting the stand, laying out a structure from them that completely repeats the shape of the bathroom. Sometimes the support is made of wooden blocks. True, before use, they should be treated with moisture-proof impregnation and means that ensure the biostability of the material.

When installing a whirlpool bowl, it is important to take care of the grounding of the wires . It is obligatory to use cables with 3 conductors. It is better if the power outlet is removed outside the bathroom. If this is not possible, remove it from the bowl (at least) by 70 cm.

Helpful hints

When choosing a bathtub for elongated bathrooms, give preference to asymmetric corner models that are installed along a short wall. In this case, in a narrow part of the room, you can place a sink, along the opposite wall - a toilet (if we are talking about a combined bathroom), a washing machine, furniture.

For the combined Khrushchev bathrooms, the optimal asymmetric bathroom will be a bowl with dimensions of 90x100 cm, which is placed along the far side of the bathroom. At the same time, there will be room for placing a sink and a toilet bowl or a narrow washing machine.

For small rooms, you should choose a snow-white bowl and other plumbing, which will visually increase the area of the room. For the same purpose, you should buy a light palette for wall decoration, as well as use mirrors.

The external bathroom panel can have sharp corners and pronounced edges ., which looks appropriate in minimalist and avant-garde, as well as high-tech interiors. For rooms in the classic spirit, it is better to choose smoother rounded panels. For oriental interiors, it is not forbidden to choose bowls of complex (five-hexagonal shapes) unusual colors. For the podium, it is worth choosing a stone or revealing them with tiles, mosaics.

The podium will be appropriate in eco-interiors, Provence-style rooms. In this case, it is sheathed with wood, and the bathtub has a drop-like shape.

For classic, Empire or Japanese interiors, you can build a pedestal into which you can then mount a bowl. She will perform 20-30 cm above the pedestal.

To prolong the life of your bowl and keep it looking good, it is important to take good care of it. Do not use abrasives, metal brushes or hard brushes for cleaning. The best option is a special agent for acrylics or a gel-like dishwashing substance, as well as a soft sponge or rag.