Doors Coated With Laminate (52 Photos): How To Sheathe The Slopes Of The Entrance And Interior Structures And Sheathing And Finishing The Doorway With Your Own Hands Using The Coat

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

No matter how high-quality and reliable the doors are, in many cases you have to additionally decorate them.

Using laminate flooring can significantly improve the appearance of the door, but this must be done as carefully as possible.

It is important to understand in advance all the nuances and take into account the features of the finish, choose the color.

What can be sheathed?

Doors covered with laminate can be any, the main material is chosen at your discretion. They can be used both in an ordinary apartment (house) and in an office. On top of metal structures, panels with a thickness of 0.7 or 0.8 centimeters are most often placed; even a non-specialist can do such work without any problems.

But keep in mind that deviating from the basic specifications can damage the cladding and lead to unnecessary costs instead of savings. Acting skillfully and competently, you can significantly improve the entrance or interior doors, and not only in aesthetic terms. Laminate flooring does not accumulate static electricity, so there will be less dust.

A steel (iron) door, after sheathing with laminate, performs its functions more efficiently - it will be more difficult to destroy or knock it out. In today's turbulent conditions, security guarantees are not superfluous.

Decorative panels will create an equally beautiful look for exterior and interior doors, hardly distinguishable from fine woods.

It is equally important that the technology of metal and wood cladding is developed thoroughly, if you follow it, you can sheathe anything.

Dimensions (edit)

Laminate boards do not always differ in the same dimensions, the length is most often 126 or 138 centimeters. For obvious reasons, elongated blocks (up to 1.84 meters long) can be more difficult to use, because their exact fit and installation is difficult. The fewer cuts are made on the material, the better its original appearance is preserved.

Laminate 9-16 cm wide reproduces the appearance of parquet, most often oak. Such boards are considered narrow (according to the generally accepted classification). Basically, they use panels from 18.5 to 19.5 centimeters, which imitate ordinary wooden boards; it is easiest to lay such a coating. Consumers are also attracted by their low cost.

A thicker panel, all other things being equal, will be more stable and durable. Even with a strong impact, it almost never deforms, and also, the thicker the laminate layer, the lower its thermal conductivity.

This circumstance is especially important for doors directly facing the street.

In the production of thick panels (from 1.2 centimeters), the minimum tolerances are used, so that the deviations in its value will be small.

Laminate of the 32nd category is available from 0.7 to 2.2 centimeters thick, it serves for a long time. Although no one will walk on the door, it makes sense to choose a coating of a higher group - 33rd, 34th, since it has better sound absorption, and more heat will remain in the house. Do not be afraid of overpayment, because very little material will be needed.

Sheathing materials

The use of flooring for decorating doors allows you to realize the most daring design ideas.

It is not difficult, for example, to take a laminate in wenge oak or other exotic colors and apply it in the interior. It is much easier than creating an original flooring from real wood.

If you want the door to resemble brickwork, stone wall, ceramic or tile, special panels are again the best way out of the situation. Simple, fast, easy and without weighting the structure.

Colour

The interior of a metal door is best decorated with patterns depicting wood of various tones. When using any color, the visual stiffness of the material will be reduced.

Regardless of the option chosen, it is undesirable to use flooring of an identical tone.

This will completely negate all the aesthetic merits of both elements. But still, you should stick to the design of doors and floors of the same color scheme, that is, tonalities that are quite close to each other.

For light rooms, it is advisable to use panels of neutral and dark shades.

Advantages and disadvantages

Of course, the good thing is that the laminate is inexpensive - just use a few strips and a completely new type of door block is ready. The speed of the work will be quite high, and it will be possible to simulate expensive material without any problems. In this case, all care is reduced to wiping the surface with weak solutions of household detergents.

In addition, laminate flooring:

• Immune to sunlight.
• Strong, keeps warm well and prevents the penetration of extraneous sounds.
• Completely environmentally and sanitary safe.

There is only one drawback - the danger of temperature and humidity changes, they can spoil the material. Therefore, its use from the outside of the room is undesirable. Consider also that it is better to sheathe metal doors with laminate with the help of experienced specialists or after a thorough study of the entire technology.

Finishing features

Fixing the laminate on a metal surface is not so difficult, you just need to strictly follow all the steps. If necessary, it is necessary to insulate the entrance, and the heat-insulating material should not be thicker than stiffeners and lathing. The ends are decorated with strips of veneer of a suitable color. You can attach laminate strips in both longitudinal and transverse ways. With a horizontal connection, its bottom and top are thoroughly attached to the edges of the frame.

Vertical fixing strips should be fixed in the middle and at the sides.

In order to avoid mistakes, they must prepare a project that reflects:

• The size of the canvases.
• Material grade and thickness.
• Estimated expense.
• Composition of tools and consumables.

The door should be sheathed with laminate by removing it from its hinges and placing it at a comfortable height.

When decorating a steel door with a laminate with your own hands, you will need to take measures against corrosion.

If it has already appeared, you will have to deal with cleaning and subsequent processing with special compounds. Sealing slopes with mortar, with all the strength and reliability, limits the design possibilities. Think carefully about whether it will matter to you or not.

Components

Slopes will also need to be decorated with laminate, otherwise the design solution will only be partially implemented. But even before finishing, you will need to seal the box on both sides, otherwise no coating will help keep warm.

To decorate the slopes, you will have to use either exactly the same laminate as on the door itself, or combined with it.

When the slopes are placed in parallel, the starter panels are used with battens of uniform thickness. But when mounting at an angle, the bar located at the door itself needs to be made wider, and the one located at the very corner - narrower.

Dowels are needed to fasten the load-bearing panels, and all other decorative blocks are glued or screwed in with self-tapping screws. Do not forget that the caps of the screws should be masked with plugs to match the coating. Silicone sealant will help to close the seams.

Decor

It is possible to improve the appearance of old doors not only by covering them with laminate. Textured plaster applied to the slopes will look good. But the consumer is not limited only to it, there are only isolated cases when the desired material is incompatible with others.

Having created an arch, it is easy to improve its perception with additional elements. It is not difficult to finish the surface with veneer, but the effect will be impressive. Translucent materials make the structure look more lively.

There are significantly more opportunities for decorating doors from the inside of the apartment than from the outside, and, in addition to the laminate, you can add mirror surfaces, for example. If you do not cover the entire canvas with one material, leave the open parts, it is worth considering options with carved platbands, with foam overlay decor.

Design

The design of the doors can either harmoniously fit into the surrounding environment, or sharply contrast with it. Both solutions are very attractive with the right approach.

Consider the style features:

• So, for a hallway in a high-tech format, decorative elements are contraindicated, the main design should reveal the idea.
• If the room is decorated in the spirit of minimalism, then try to choose an option that at the same time creates a sense of simplicity and elegance.

• The Japanese style is incompatible with the use of bright colors and variegated colors.
• For an Empire-style room, a plain blue or red laminate on the door will be preferable, an alternative is gold and white paints.

Famous manufacturers and reviews

The overwhelming majority of consumers who have bought Laminely laminate flooring are satisfied with its quality and give positive feedback. Products from Quick Step are easy to install, while their design is in no way inferior to the best examples of competitors. Ecoflooring Country products also evoke positive emotions among buyers in different regions of the Russian Federation.

If you do not want to choose for a long time, just purchase the product from any well-known manufacturer.

Successful examples and options

It's not a bad idea to choose a laminate in your doorway that will show the originality of your approach. Imitation of marble and animalistic subjects, floral motifs and ancient castles, tropical forests and sea coasts - the scope for decoration is almost inexhaustible.

In the video below, you can see the combination of laminate colors with doors.