2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
In Soviet times, almost all heated towel rails were a typical coil, which was used not only for drying linen and towels, but also as a heating device. Since then, the main purpose of the heated towel rail has not changed, but the appearance has become more improved. Some aesthetic appeal has appeared, and the forms have become more diverse. To connect the pipes to each other and give the heated towel rail a certain shape, special devices are used - corners, or fittings.
Varieties
Before dealing with the types of corners, it should be noted that the heated towel rails themselves are divided into 3 large categories:
- electrical;
- combined;
- aquatic.
It is noteworthy that heated towel rails from the first two categories initially come complete with special clamps. And heated towel rails of the third type require additional accessories. It is for them that the corners are mostly made. Such heated towel rails are presented in various forms:
- classic version;
- U-shaped;
- angular;
- in the form of ladders of different lengths.
To visualize the fittings for a heated towel rail, just look at the standard plumbing corners. They are practically the same, apart from some difference in visual appeal. The corners for the heated towel rail are not only useful in fixing the heated towel rail, but are also a worthy and full-fledged interior decoration.
Such fittings are made of stainless steel, brass, and can also have a chrome finish.
All connecting fasteners are subdivided into several categories among themselves:
- swivel fittings at 45 and 90 degrees, which are used to connect to the central pipe;
- tee;
- detachable extension cord;
- crosspiece;
- clutch and clutch-American;
- stopcock;
- brackets and plugs.
There are also transition corners, with a union nut, internal thread and a Mayevsky tap. Each connector differs not only in purpose, but also in size - for example, 1x1 ", 1x3 / 4" and some others. It is noteworthy that an angle of 1 inch is considered the smallest.
The corners also differ in color - yellow (made of brass), black, chrome plated. Factory fittings are always of high quality as they are made from the most durable metals.
Selection rules
Since a heated towel rail is a very important accessory, the choice of the product itself, as well as the accompanying accessories, must be approached as responsibly as possible. First you need to decide for what purpose the corners are purchased . As a rule, during the initial installation of a heated towel rail, almost all types of fasteners will be required.
The choice of color is highly individual. The color black or chrome should be selected in accordance with the color of the coil itself, as well as the overall interior of the bathroom.
In the selection process, you must carefully monitor the quality of the purchased corners. Poor quality fittings can cause untimely breakage and water leakage from the coil.
Installation
It is important not only to make the right choice in favor of quality corners, but also to install the corners correctly. In practice, several mounting options are used.
- Capillary brazing, which is best for copper and non-ferrous alloy parts. The peculiarity of this technique is that a small gap is left between the two elements to be connected (within 0.5 mm). Then molten solder is poured there.
- Compression method, in which two elements are connected to each other using a special compression ring.
- Press connection.
- Self-locking fittings.
An important point: regardless of the chosen method of fixation, during installation work, experts recommend using a special polymer winding. Conventional FUM tape is also acceptable, but this option is considered less reliable.
When carrying out installation work, it is also necessary to select fittings by size. Unsuitable corners can also cause premature failure.
Recommended:
Heated Towel Rails Eccentrics: 1 Inch, 32 Mm And Other Sizes. Chrome Plated Eccentrics For Connecting A Heated Towel Rail, With Union Nut, With Reflector, Installation
Almost every bathroom has a heated towel rail that maintains a comfortable microclimate. When installing it, you can not do without an eccentric, which acts as an adapter compatible with pipes with a diameter of 1 inch,? or ? inch at 32mm offset and other size
Height Of The Heated Towel Rail From The Floor: The Standard For The Installation Height In The Bathroom Of An Electric And Water Heated Towel Rail According To SNiP
The height of the heated towel rail from the floor to the fastening must comply with the requirements of SNiP. First of all, this is safety during operation, and secondly, ease of use. What is the standard for the installation height in the bathroom of an electric and water heated towel rail according to SNiP? At what height can an electric heated towel rail be installed? Can the coil be hung over the washer? What about sockets?
Fittings For Heated Towel Rails: Accessories For Connecting A Heated Towel Rail, Installation. Stainless Steel Fittings, Chrome Plated, Angled And Others
What are the available towel warmer fittings? Installation of accessories for connecting a heated towel rail: features of this process. How do I choose the right fittings for my installation?
How To Bleed Air From A Heated Towel Rail? How To Bleed Air From A Heated Towel Rail Without A Tap, Such As A Ladder, With A Bottom And Other Connection?
How to bleed air from heated towel rails of various designs? Why are there air locks in these devices? How to bleed air from a heated towel rail without a tap and with a Mayevsky tap on your own?
Heated Towel Rails "ARGO": Electric And Water, Information About The Manufacturer. Heated Towel Rail "Ladder" And Others, Instruction Manual, Customer Reviews
What are the advantages and disadvantages of ARGO heated towel rails? Let's consider some electric and water dryers models. Consider the information about the manufacturer. What reviews do customers leave about the company? S heated towel rails?