2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09
Warm days and cozy evenings outside the city are loved by every resident of the metropolis. However, this wonderful pastime can be spoiled by various buzzing insects. To combat them, there are a huge number of effective tools. While creams, aerosols and fumigants are all about getting rid of mosquitoes for a short period of time, modern treatments for these annoying insects help get rid of them for a long time. One of the most effective is the mosquito gas trap.
Pros and cons
A gas trap is one of the best mosquito repellents for outdoor use . Unlike fumigators, which only last for a limited time and are only suitable for indoor use, the gas trap has a longer duration and is designed specifically for outdoor use and large spaces. It is more powerful and has a larger area of impact.
The principle of operation of this outdoor trap is to use a decoy that imitates a person's breath. This is done with the help of a cylinder of carbon dioxide, on which insects fly. Flying close to the device, they will be sucked in by the fan.
The advantage of choosing this type of insect trap is its optimal performance
-
Noiselessness … The fan inside the mechanism works so quietly that the human ear does not perceive it.
- No smell . The carbon dioxide used as bait does not smell, so it is hypoallergenic.
- A tangible result … During the night, it can catch up to 1-1, 5 thousand mosquitoes.
- Big square actions.
- Simplicity in service.
- Price this device will fully pay off with a long service life and effective work.
- Models are produced that work not from the mains, but from batteries or accumulator .
- Battery power enough for the whole season.
- Control occurs by pressing one button.
- For convenient storage the trap has a collapsible design.
Of the disadvantages of such a trap, only the high cost can be called, however, the effectiveness and duration of the result, as well as the durability of such a device, fully justify it.
Work principles
The design of a gas trap for mosquitoes consists of a gas cylinder with carbon dioxide or propane, a thermal heater, a photocell, an attractant (a special agent that copies the smell of a person), a fan and a container where the captured insects get to.
The principle of the street trap is based on imitating human breath, which lures insects . This happens with the help of a gas cylinder, which, when the device heats up, emits carbon dioxide, combining with an attractant. The flying insects are sucked in by the fan, and they fall into a special bag, passing through the energized grid on the way.
A reducer is located inside the trap, which maintains a certain level of working pressure inside the cylinder, regardless of environmental conditions.
Most models are equipped with an automatic shut-off sensor that detects in daylight. At the end of the day, when the level of sunlight decreases, the machine will automatically turn on again.
A trap with a carbon dioxide cylinder is an effective protection against mosquitoes for the entire season of their activity
Where to install the destroyer?
Installing a portable gas trap for insects is easy, you can do it yourself. Before installing this device outdoors, it is necessary to determine the place where the largest accumulation of mosquitoes is located.
It must be placed between the place where they breed (tall grass, pond, shrubs) and the place where people are. In this case, insects are destroyed even before they reach you.
The distance at which the trap should be placed is about 10 meters from the crowd of people . And also it is necessary to take into account the direction of the wind.
The device should be installed so that the wind blows the gas towards the mosquito habitat.
If your site is not on a level surface, it is better to choose an elevated position to place the trap
Bloodsuckers do not like the sun's rays, so it is better to place the device in the shade. And also for the best operation of the device, it must be installed on a level place without tall grass so that the gas can freely spread around the area.
The trap is designed to withstand a wide variety of weather conditions, but the automatic irrigation system can damage it if water gets into it from the side.
Service
Before using the mosquito gas trap, you must carefully read the instruction manual , which comes with the device. It contains detailed information about the rules of service.
The blood-sucking insect trap is fairly easy to maintain. Everyone will be able to independently fill or replace a gas cylinder. This must be done every 15-20 days. The volume of the gas container is 10 liters. Propane models are available and must be refilled every 21 days.
The mesh should be cleaned when it is half full.
Here is an example of how to maintain a pesky insect gas trap:
- turn off the device;
- pull out the gas cylinder;
- refuel the point with gas (carbon dioxide or propane);
- remove the net and clean it from insects;
- using a quick cleaning cartridge, blow out the device;
- wipe the unit inside and out with a damp cloth;
- replace the container with the attractant;
- insert the gas cylinder back into the device;
- turn on the device.
Periodically (once a season) it is necessary to return the device to a service center for a routine inspection . If dirt gets into the burner, which heats the gas, or dust accumulates, the efficiency of the device will be noticeably reduced.
Recommended:
Brazier From A Gas Cylinder (78 Photos): How To Do It Yourself, Drawings And Making A Barbecue From A Propane Cylinder
Brazier from a gas cylinder is a simple and original solution for frying meat. How to make a brazier with your own hands from a gas cylinder, for example, in the form of a pig? What materials are needed to create a brazier from a gas cylinder with your own hands?
DIY Garden Shredder: Homemade Branch And Grass Shredder From A Washing Machine. How To Make An Electric Trash Shredder?
How to make a DIY garden shredder? Why is a homemade branch and grass shredder good? How to make such a technique from a washing machine or a drill? What should be considered when operating a homemade shredder?
How To Get Rid Of Mosquitoes? How To Kill Them In The Apartment And What Are They Afraid Of? What Means Scare Them Away? How Long Do Mosquitoes Live And Where Do They Come From?
How to get rid of mosquitoes, how to kill them in the apartment and what are they afraid of? What means scare them away? How to do this in folk ways and using purchased devices? How to make a mosquito trap with your own hands?
What Smell To Scare Away Mosquitoes? What Odors Are Mosquitoes Afraid Of At Home And Outdoors? What Plants And Other Remedies Keep Mosquitoes Away?
What smell to scare away mosquitoes? What odors are mosquitoes afraid of at home and outdoors? What plants and other remedies drive away annoying bloodsuckers?
Carbon Fiber: Carbon Fiber Production Technology In Russia, Putty And Underfloor Heating With Carbon Fiber, Density And Characteristics Of Carbon Fiber
What is carbon fiber? What is the technology of carbon production in Russia? What you need to know about putty and underfloor heating with carbon fiber, and what other applications does this product have?
