Billiard Lamps: How To Choose Billiard Table Lamps? Height Of Lighting, Sconces And Models For 3 And 4 Shades. Where To Hang?

Table of contents:

Video: Billiard Lamps: How To Choose Billiard Table Lamps? Height Of Lighting, Sconces And Models For 3 And 4 Shades. Where To Hang?

Video: Billiard Lamps: How To Choose Billiard Table Lamps? Height Of Lighting, Sconces And Models For 3 And 4 Shades. Where To Hang?
Video: Let's Ask Brian! | Height recommedation of light over a pool table. 2024, May
Billiard Lamps: How To Choose Billiard Table Lamps? Height Of Lighting, Sconces And Models For 3 And 4 Shades. Where To Hang?
Billiard Lamps: How To Choose Billiard Table Lamps? Height Of Lighting, Sconces And Models For 3 And 4 Shades. Where To Hang?
Anonim

In order for each of the players to make the correct move in billiards, the table must be well lit. Conventional chandeliers or other lighting fixtures are not suitable for this purpose. We need exactly billiard lamps. Let's figure out what they are and how to choose them.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

Peculiarities

Billiard lights are placed above the table to illuminate the playing field. In most cases, they correspond to the following parameters:

  • closed shades, which can be made of metal, plastic or fabric (that is, they should not be transparent);
  • the lamps are coated to diffuse light over the surface;
  • the power should not be more than 75 W (at a lower power it can be very dark, and if you increase the power, it will also be uncomfortable to play, since the bright light will shine).
Image
Image
Image
Image
Image
Image

Billiard table lamps have such components

  • Supporting structure, the length of which depends on the number of installed shades. This part is always made from durable materials, since all other elements are attached to it.
  • Fastening system - with its help, the supporting structure with shades is securely fixed to the ceiling, directly above the table.
  • Plafonds into which bulbs are directly screwed.

For the safety of players in the room, special protective grilles are put on the lamps. In no case should any wires hang from the structure. Everything needs to be removed and isolated.

Image
Image
Image
Image

Types and design

Luminaires should not only be beautiful, but also durable. Various materials are used for their manufacture: from metal to wood and plastic. The main requirement for materials is strength. The use of glass and ceramics in this case is excluded, as there is a risk of injury to players as a result of an accident. Lamps, sconces and illumination for billiards can be conditionally divided into 2 large categories.

  • Classic - pendant lights, consisting of a rod, a suspension system and shades with lamps. This option fits well into any interior.
  • Exclusive - they can contain interesting decorative elements, and expensive fabric can be used to create shades. The advantage in this case is the design, and the disadvantage is the high cost.
Image
Image
Image
Image
Image
Image

Each of the luminaires can be at least 3-4 plafonds, and a maximum of 10-12. The mounting option may differ.

  • Hard - is the safest, evenly illuminates the entire surface of the playing field (recommended for installation in open rooms where wind gusts are possible).
  • Soft - chains are used as a suspension element. Plafonds can swing in the wind, this must be taken into account.

Most often, the lamps look simple and discreet. Only on exclusive models can you find forged elements or some kind of patterns.

Image
Image
Image
Image

Selection recommendations

When choosing and buying lamps, you need to pay special attention to some details. So, it is important to check:

  • structural strength - you should always pay attention to what materials it is made of;
  • it is permissible to use LED and fluorescent lamps;
  • the presence of a protective grill;
  • cost - too cheap luminaires can be unsafe.
Image
Image
Image
Image

If these factors are taken into account when buying, then you can choose high-quality and beautiful lamps. The most common and high quality are models of lamps from the following manufacturers.

  • Everlite from Porter Billiards . The cost of a lamp for 6 shades is about 8 thousand rubles.
  • Lamp from Russian manufacturer of the "Start" factory will cost about 2 thousand rubles for a plafond. Also a decent option.
  • Prestige Golden from a Chinese manufacturer can also be a good competition. The price for one plafond is 2, 5 thousand rubles.

As you can see, in stores you can buy lamps for every taste and budget.

Image
Image
Image
Image
Image
Image

How far to hang?

Before installing the luminaires, you need to decide on the height. The distance between the lampshades and the table surface should not exceed 100 cm. Violation of this range can lead to undesirable consequences. So, if you install the lamp below, then players can easily get injured in the process … For example, the heads can touch the shades, which is fraught with varying degrees of bruises and burns. Also, the light will be very bright, which will create additional stress on the eyes.

If you raise the lamps higher, then it will not be very comfortable to play due to insufficient lighting . This causes rapid eye fatigue. As a result, in the process, players will be unnecessarily tense and get tired quickly. If we take into account all the above points when choosing and installing, then billiard lamps will make the game as pleasant and comfortable as possible, while they will last more than one year without breakdowns.

Image
Image
Image
Image
Image
Image

It is better to purchase this product in trusted and specialized stores. Beware of counterfeits.

Recommended: