Fixtures For A Bath (69 Photos): Waterproof And Heat-resistant Models For A Steam Room

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

It was not for nothing that the expression “wash before dark” was used in Russia, since in conditions of high air humidity it was not possible to install torches or candles, and the windows themselves were always small so that as much heat as possible was not wasted. Currently, the market for lighting fixtures in general and lighting for baths in particular is oversaturated with various models, even the most demanding taste will find here a product to their liking.

Peculiarities

There are certain features of conducting lighting and electricity in the bath, much depends on the safety of the devices, as well as on other conditions - room temperature and air humidity. To summarize, we can come to the conclusion that in the dressing room these parameters are approximately identical to the parameters of the atmosphere that prevails in the bathroom in an ordinary apartment.

If the bath is designed in such a way that enough steam enters the room in front of the steam room itself for its accumulation or condensation, then during the wiring it is necessary to somehow indicate this place on the diagram.

The peculiarity is that here only a model with a waterproof case is suitable for the effective operation of the lighting device.

The modern market has several universal wiring options for laying in rooms with high humidity, they have a specialized design. However, the price of such materials is quite high, which is not profitable for those who are building a small steam room for themselves and their families.

In this regard, there is an alternative solution to the problem based on the fact that the main point to pay attention to when wiring electricity, as mentioned earlier, is the temperature and moisture level in the room.

Previously, wiring in such conditions was laid in pre-prepared pipes, they were galvanized and completely covered with thermal insulation. You can use this method now, but the following conditions must also be met:

• when laying pipes, it is necessary to make sure that they are higher than all containers and pipes with water;
• there are hot elements in the room - stoves or other heating devices, it is necessary to lay electric lighting wires as far as possible from them;
• if the wiring is ordinary in terms of its properties, then before laying it along the pipe, it must be wrapped with a protective layer of fiberglass, the required thickness is about 2 mm.

We must not forget about the switches and sockets that we may need in the dressing room, it is better to install devices with a waterproof case there.

But in no case should contact and connecting devices be fixed in the steam room or in the room in front of it, they must be removed and installed outside - in a rest room or dressing room.

Varieties

There are a wide range of lighting products on the market, but not every model is suitable for a bath, since the difference in temperature and high humidity in the room is not up to every lighting device.

There are several main types of lamps for the bath, among them there are waterproof, heat-resistant, LED, moisture-resistant, low-voltage, wireless, and so on. All must be told in order:

Halogen lamps

The most heat-resistant lamps are halogen. The power of such lamps ranges from 20 to 35 watts, the maximum heating for them will be 400 degrees. An important aspect is that the voltage used by the luminaires is not dangerous for people, and their contacts are protected from moisture. In addition, halogen lamps have a pleasant appearance, it is possible to select shades of different colors.

LED lights

LED lamps are one of the most economical and environmentally friendly lighting options, however, it is better to place them as low as possible in the steam room, since they are rather difficult to tolerate heat and moisture. Such lamps are often used as backlighting, they can be placed behind shelves, they can illuminate a room with different colors, since their spectrum is quite wide.

The room with LEDs will always be well lit, while such lamps do not consume a lot of electricity.

Elongated tubular LEDs are usually placed on the ceiling, it must be borne in mind that the concentration of steam and moisture there will be maximum, such lamps must be resistant to the specified conditions.

When purchasing waterproof lamps for a bath, several aspects must be taken into account:

1. On the box or frame of the luminaire, you need to see information about how high the degree of protection of this model from moisture is, for this there is a certain international classification; an IP value of 45 or higher will be acceptable.
2. In addition to the fact that the lamps must be moisture-resistant, they must also be heat-resistant - in the steam room the air temperature can fluctuate from 60 to 120 degrees and the lamp must be designed for such temperature jumps; Well, for ceiling models, the standards are even higher, since they need to work at temperatures up to 300 degrees Celsius.

It is important that the luminaires are sealed, otherwise moisture or water can get inside the device and disrupt its operation. Rubber and silicone are good sealants.

Fiber optic lamps

The best waterproof luminaires are fiber optic lamps. By purchasing a fiber-optic lighting device, you can be sure of its moisture resistance, even without paying attention to the degree of protection factor. This is possible due to the specific properties of the material; it is capable of passing only light waves through itself, but not electricity. These lamps can also be used in water tanks and swimming pools.

Also, the advantage of these lamps will be a rather soft light, which will help create a cozy atmosphere and relax.

Just like LEDs, fiber optic luminaires consume very little energy and have a long lifespan.

Models

When choosing different models of luminaires, you also need to build on where exactly it will be installed, the temperature and humidity of the air are also decisive factors on which they rely when looking for a suitable option.

If the light needs to be conducted in the steam room, then, the main thing is not to install it in a potentially dangerous place - near heating elements. A good option would be to place it on the ceiling or at the junction of walls.

Such placement is often underestimated, but in vain: the corner lamp will not only fit well into the interior, but also will not interfere with people sitting in the steam room and hurt their heads.

Models of horizontal lamps at the junction of the ceiling and walls can also be called a quite suitable option. A decorative screen for an angular or horizontal type of lamps can be purchased in a store or made by hand, then it will additionally be possible to install an LED strip in the corner of the steam room, and fix it to the wall using a non-combustible material.

By itself, the LED strip will look very advantageous in the bath, moreover, it is quite insensitive to high temperatures and does not require a lot of electricity to use.

If you want to be creative in decorating the premises in the bath, then you can make some lighting elements with your own hands. However, here it should be understood that we are not talking about self-assembly of an electrical appliance, but rather about decorating an existing one by creating additional elements. The interior of the steam room is often dominated by wooden materials, so making a lattice or lampshade made of wood will be a suitable stylistic solution.

Such wooden lampshades will not only have an aesthetic function, but will protect wall lamps from damage and direct ingress of water. In addition, with the help of the grill, the lighting will be softer, diffused - it will become even more comfortable and pleasant to be in the room. It is not worth worrying about the material for the manufacture of such decorative elements, it is quite possible to use the remnants that were not thrown away after the walls or ceilings of the bath, this will also help to maintain a single style concept.

However, if there is a desire to fill the steam room with aromas that contribute to relaxation and detachment from everyday problems, you can make an antique lampshade from larch or cedar, besides, these materials are also quite strong and durable.

In order to make a lampshade or grate yourself, you need to have elements for the frame and several small slats that will be fixed at the top and bottom of the finished product. Of course, when making a lamp, there are certain points that you should pay attention to:

• The size of the lamp itself will dictate the length of the lamp shade rail; there should also be no sharp corners, they must be sanded or rounded, this is necessary, from a safety point of view, as well as to give a more aesthetic appearance to the product.
• The shape and type of the lattice will differ depending on the size of the lamp itself, for example, if we need a frame for a wall lamp, then it should be made in the form of a semicircle or rectangle; the grille for the corner luminaire will be made in the form of a trapezoid.
• It is best to fix such lamps with self-tapping screws, but, from a safety point of view, they must be hidden inside so that they do not harm when heated.

When lighting other rooms in the bath, you can use lamps with less strict characteristics, traditionally the dressing room is decorated with a chandelier, which is located in the middle of the ceiling, or several lamps that are installed directly into the ceiling itself.

Modern models of chandeliers and lamps, stylized in antique style or the chosen concept, will look harmonious; such lamps can literally become a bright accent in the interior of the room.

Materials (edit)

There are various lamps on the market that can be installed in a sauna or bath, and if the model has already been chosen, then you need to think about the material from which such a device will be made.

Lighting of premises with the help of Himalayan salt … It is a material formed at the bottom of a lake that dried up about two hundred and fifty million years ago. This salt is unique in that it contains more than 90 minerals, and when heated, it releases particles that have a beneficial effect on human health.

It is thanks to these properties of Himalayan salt that it began to be used in baths and saunas, and because of its high density, salt has become a building material - bricks are made from it, used as a decorative element or as a steam generator.

Popular and lamps made of himalayan salt , but often for baths, it rather acts as an independent building element, walls made of such salt, when the room is heated, create the effect of the sea coast. Such vapors contribute to the prevention and treatment of bronchitis and even asthma, negative salt ions contribute to air disinfection.

Any products made from Himalayan salt emit ions, however, at certain temperatures - more than 60 degrees Celsius, the air will be more saturated with useful substances.

It is also necessary to comply with the conditions for the required humidity in the room - no more than 50%, since, otherwise, the salt will absorb water, and this will be ineffective.

It is for this reason that the use of Himalayan salt is more profitable for a private bath, which is not designed for a large flow of visitors, in which the material cannot quickly damp. Even in an ordinary Russian steam room, you need to thoroughly ventilate the room after each use, wait for the walls to dry so that the salt does not lose its properties.

In general, the shell from which the lamp is made is very important, since it has several main functions: protecting the light source from harmful influences, making the light softer by diffusing it, which makes the steam room cozy. All these criteria are met by a lamp made of wood, it has undeniable advantages:

• a wooden lamp will go well with the atmosphere of the steam room, with the walls and ceiling, since they are often also made of wood;
• there is an opportunity, making such a lamp with your own hands, endowing it with an interesting shape, performing with a beautiful ornament;
• quite pleasant to the touch.

You can also install a ceramic lamp in the recreation area, that is, its base will be made of this material, resistant to temperatures.

You can use glass in decorating bath lighting, just do not put such lamps in the steam room itself - it is unsafe.

Accommodation options

As mentioned earlier, there is a fairly large number of different fixtures suitable for installation in baths and saunas. But each room has its own differences, respectively, and the lighting for them is matched with the appropriate parameters:

In the steam room

In order to install the lamp in the steam room, you must first carefully approach its choice. The thing is that this is, one might say, the main room in the bath, it is saturated with steam, moisture and hot air. All these factors affect the selection of the luminaire; not every model meets such characteristics. In addition, too bright and contrasting lighting also does not speak in favor of certain types of lamps; for the holy of holies of the bath, soft light is needed to help relax.

Since the steam room has its own special microclimate, you can install the lamp in it only on the very top of the wall or at the joints - in the corners. This is due to the fact that the ceiling and walls are one of the hottest surfaces in the steam room, moreover, such an arrangement can be called comfortable, the light streams from behind and does not strain the eyes of those who relax in the bath. You can install fiber optic lights, then the lighting will definitely be soft and diffused, this will help you relax.

An important point is that such lamps have a high level of protection and are quite safe in rooms with high temperatures.

You can also choose LED lamps, they are heat-resistant, have several lighting modes and a rich color gamut, with them you can easily save energy, besides, LEDs have a long service life. But in any case, the lamps must be covered with a protective frame or a heat-resistant shade, and to create an entourage and additional protection, you can cover the light with a wooden lattice with a beautiful design.

Inside the bath, if the lamps are mounted on the ceiling, they must withstand a temperature of 250 degrees, if on the wall, then less - at least 100 degrees Celsius.

Such lamps are made of heat-resistant material, ceramics or porcelain, the body is additionally strengthened, making it airtight.

In the washing room

In contrast to the steam room, in the washing room, on the contrary, it is necessary to conduct a bright and powerful light, since this room is not intended for relaxation, it is necessary in order to wash after the steam room. It is for this purpose that a contrasting and sharp light is installed in the sink, but it still should not hit a person in the room in the face.

But here you also need to be careful, this room has a source of moisture, you need to protect lamps and wires from accidental ingress of water on them. The switch should be located outside the washing room in order to prevent water from entering there; for the same purpose, all lamps will have protective waterproof frames or shades.

In the dressing room

In the dressing room, lighting can be done by almost anyone, since the room does not have any special temperature drops and moisture concentration. The classic option would be a chandelier in the center of the room or several lamps that are mounted on the ceiling. The light from such lamps turns out to be bright, but does not hurt the eyes and, in general, creates a rather comfortable atmosphere in the room.

It is also possible to style the dressing room in a certain manner, then the lamps can be placed on the wall and made in accordance with the general concept of the interior.

In the rest room

In the rest room, just like in the dressing room, there is a certain humidity coefficient, therefore, when installing lamps there, you need to be sure that they will have at least protection class 1. Lamps for such rooms are quite ordinary, from 75 to 100 watts, you can also install ordinary lampshades or sconces.

For a sauna, in general, the same temperature difference is characteristic for lighting, it is worth paying attention to the classification of the international level of protection, making sure that the lamps are heat-resistant, heat-resistant and sealed.

Which lamp to choose and how to install?

Experts agree that in order to make lighting in the bath, you should not choose fluorescent lamps, since they are not resistant to high temperatures and humidity.

It is better to choose halogen or LED lamps, a fiber optic lamp is also suitable, but all this must be secured with a protective cover. In the dressing room, you can use two lamps at once with parallel switching on of the light source to add brightness to the room lighting.

This is also done so that there is a so-called backup light, if one burns out, it can be replaced by another - this will allow the dressing room to always be lit.

An interesting option would be to install small LED lamps on the ceiling of the room, they are placed pointwise around the entire perimeter, LEDs for bathrooms are well suited for such purposes. Rather, it is an option for a dressing room or a rest room, since high temperatures will not always allow the LED strip to work properly.

Also, LED lamps can be used as emergency lighting in the steam room, this is done by installing a not very large 12 Volt battery and several multi-colored LED strips: they mark potentially traumatic places in the steam room, then the LEDs are connected to a special unit on which there is a voltage indicator networks.

It is not recommended to mount lamps with incandescent lamps in a Russian bath, since they have a risk of creating an increased voltage of the network, moreover, they do not have any special protection. The best option for a steam room would be a 12 Volt halogen lamp with a ceramic cartridge and also sealed with a special rubber ring.

The frame will also be a good protection for the lamps, which additionally acts as a decorative element.

It must be remembered that it is not worthwhile to install lighting in the bath on your own, this is a room of increased danger due to sufficiently high temperatures. It is imperative to comply with all the standards that are established by the set of rules for the installation of electrical installations.

First, you need to run the power cable from the closest source of electricity, then the cable must be fixed on the outside of the building, all this happens through a specialized box, you must remember about grounding.

You can also put a lamp in the bath on your own, there are several stages:

• First, you need to outline the places where the lamps will be located, and also mark with a pencil or marker the places where the wires are output; it is very important to calculate the distance between the lamps if there is a need to make several light sources.
• Next, it is necessary to carry out the power supply, which is placed in a special corrugation that protects against heating.
• Before starting all work, it is necessary to accurately check the wiring.

• Next, the walls are sheathed, holes are cut out in the shape of the lamps, the exact parameters of which are indicated in the passport.
• Installation of recessed luminaires differs from overhead, the first cut wires, and then attached to the holder, and the second fix the mounting plate.
• If you plan to install 12 W lamps, then you need to connect a transformer that reduces the supply of electricity to the required power; it must be laid in the frame.
• The lamps are screwed in only after all the lighting has been mounted.

The most important rule when installing lighting in a bath is to be careful and check in advance all dimensions for mortise lamps, because incorrectly selected parameters can ruin the entire appearance of the bath.

You will learn more about lamps for a bath in the following video.