Brick Wall From Plaster With Your Own Hands: Imitation Of Brickwork, How To Make Bricks From Gypsum Plaster

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Today, the use of brick or its imitation in design is very popular. It is used in various premises and styles: loft, industrial, Scandinavian. Many people like the idea of giving wall coverings an imitation of real brick, and there is nothing difficult in its implementation.

Finishing methods

There are two ways to accomplish this finish. The first is plaster tile cladding, which falsifies the brick and is applied to wet plaster. The second method is to imitate brickwork when creating a relief surface. Such a semblance of masonry will bring originality and freshness to the interior.

The surface of the walls, finished with brick, unites the strict lines of the rows and emphasizes the special decor of the texture of each square. The natural brick surface is rough and uneven, which is why many people use its imitation. This method of decoration is preferred to natural brickwork, and it belongs to the architectural style of the loft.

Peculiarities

When choosing a material for this finish, the following criteria are taken into account: aesthetics, pricing and harmlessness.

In this case, brick imitation plaster is the most suitable option, which has a number of advantages:

• The purchase of this material does not require large investments of funds.
• Wall cladding takes relatively little time.
• This coating is applied in a thin layer, and you do not have to worry about narrowing the room.

• Such a coating is easy to apply with your own hands, without involving specialists and avoiding additional expenses.
• Brick plaster can be used to decorate not only the wall surface, but also an apron in the kitchen, corners or doorways.
• Such plaster imitates the finishing of expensive clinker tiles.

How to choose plaster

Before starting work, you must purchase all the necessary materials in advance. In terms of imitation of brickwork, gypsum plaster is most acceptable, while When buying, attention should be paid to the following characteristics of the material:

• It should be easy to apply and elastic.
• It is important that there is no shrinkage property after hardening.
• Before use, there should be no preliminary or additional surface filler.
• The material must be environmentally friendly and harmless.

A cement mortar with the addition of sand, which is made independently using a well-known ratio of 3: 1, has proven itself well.

But still, preference should be given to ready-made mixtures, they have greater elasticity and ease of use. This material, diluted to the desired consistency, is sold ready-to-use. This mixture is a homogeneous mass that can be applied immediately. The advantage of such plaster is also that the container with the remaining mixture is tightly closed, and it can be used even after a long time.

Dry mixes can be varied and heterogeneous . They include various components, for example, an additive in the form of coarse stone chips. For this, the manufacturer indicates on the packaging for which surface this composition is suitable.

For the priming of the working surface, many different compositions are also produced in liquid and pasty form. But before this type of work, it is better to treat the wall with a deep penetration liquid composition.

Application process

Before you start creating a simulated brick surface, you need to find out if the walls are suitable for such work. They must have a flat surface and not "piled up", a suitable wall has an angle of 90 degrees relative to the floor. It is important that there are no large pits, bumps and dips. If there are any, alignment should be made using cement mortar, beacons and plaster mesh.

You can assess the condition of a surface by applying a long rule to it. If gaps of more than 3 cm per meter of length appear between the rule and the surface of the wall, proceed with the alignment.

If there are small defects (cracks, small irregularities) on a straight wall, there is no need to plaster it, just fill up the imperfections with cement or putty. After complete drying, you need to treat the surface with a deep penetration primer, having previously mixed glue into it. Priming is required, otherwise the decorative layer of plaster will begin to flake off and fall off over time.

Before work, you need to put a plaster solution , prepare an auxiliary tool so that it is always at hand if necessary: a roll of scotch tape, a wide and narrow spatula, a rule or a laser level and a string for displaying beacons. It is very convenient to direct the mixture with a drill, on which the mixer is attached - a special nozzle for thorough stirring. In order not to spoil the flooring, lay an oilcloth.

After all the necessary conditions are fulfilled, you can begin to apply the plaster mixture. The simplest and most applicable method for many involves the addition of color to the induced solution. You just need to dilute the dry solution, as indicated in the instructions for use, add the coloring element there and mix everything thoroughly using a mixer.

If you have never encountered such work, in this case, you should not impose too much solution. After some time, you need to try to work out it, otherwise it will seize and become unusable for application. It is necessary to induce the solution to a certain viscosity, until it acquires the consistency of thick sour cream and begins to slide off the spatula evenly, without falling in pieces.

The induced solution is taken on a spatula and thrown onto the surface, while smoothing upwards. If you want the surface to mimic brick, do not try to level the applied mortar too smoothly. Brick does not have a smooth surface, it is usually uneven and rough.

When making a decor for a brick, it is imperative to take into account the width of the seam; if this condition is not met, the appearance of the finished surface will be unnatural. In this case, the dimensions of the most common brick are not very important, since this material is made both elongated and square.

Currently, textured and embossed non-standard bricks are produced . And this kind of plaster can imitate. When starting to perform such work, it is preferable to have some experience gained in finishing to imitate ordinary standard bricks.

When applying joints between fake bricks, use a ruler, or better, a rule. Then the line will be perfectly straight. If you want a curved line, you can draw it by hand. The seam must have time to be done before the solution hardens on the surface. When the strips are drawn, surpluses will appear, which are well removed with a dry cloth.

Thus, each applied pattern is "drawn" in turn. A prerequisite is that the coating must be wet, the decor must be applied before the solution sets or hardens. After this process, the surface is allowed to harden and it is not recommended to touch it during drying. To obtain the original texture of the bricks, you can paint over the decor with a dry and hard brush.

After the wall covering is dry and solid, use sandpaper and sand the decor, but it depends on your preference. The last moment is the removal of all unnecessary plaster elements that spoil the picture. Subsequent processing of the resulting decorative surface will depend on the type of solution used and the presence of coloring elements in it, which are not always added.

Colour

It makes no sense to leave the plaster imitating brick in a natural light gray tone. To do this, paint it. In this process, there are many design options and complete freedom of choice, it all depends on your taste. Natural bricks come in different shades, so you can mix several color pigments for better visual similarity.

You can first apply a layer of paint of one color, and after a few minutes create a different color or give individual bricks a brighter look. There is a variety of shades in natural brickwork, therefore a decorative coating that imitates brick can have many tones.

You can experiment with colors without fear of ruining it , currently bricks are produced in a variety of colors - from bright to dark. And few people will be able to guess that the "masonry" is fake. Only the discrepancy between the imitation of masonry in color scheme with furniture or flooring can spoil the look of the interior. Therefore, when covering, select matching colors.

Also, a decorative coating that imitates a brick is made by hand using adhesive tape. For this process, construction tape is required in a width equal to the seam when laying. Then, on the wall covering, which is finished with plaster imitating a brick, horizontal and vertical lines are drawn along a ruler, corresponding to the connecting seam. It should be borne in mind that the vertical lines through one horizontal row are shifted by half a brick. The strips drawn along the entire length are painted over with paint similar to the color of the applied mixture, and after drying, adhesive tape is glued to the painted lines.

It is imperative that you first glue the horizontal, and only then - the vertical stripes, with a different order it will be difficult to remove them later.

Then a layer of decorative plaster is applied to the glued tape, while smoothing and leveling it. Smoothness will depend on your preference for embossed or perfectly flat decor.

As soon as the applied solution begins to harden, remove the tape. A little effort is enough to pull on the horizontally glued strip, and the whole structure will easily come off. After complete drying, you can apply any method of finishing the decorative wall for a brick.

Tips

A decorative brick wall looks more realistic when painted in a tone that is lighter than the material itself. After drying, the paint becomes darker.

Decorative finishing in new buildings can be carried out one year after the completion of all work and the commissioning of the object. Buildings shrink in the first months, and cracks may appear in the decor.

Do not mix the gypsum mixture with cement tile adhesive, otherwise peeling from the surface will occur and cracks will appear.

When painting a hardened plastered surface, water-based paints, water-dispersion or emulsion compositions are used. They are available for sale in various colors, and dye can be added to obtain a specific color.

It is recommended to varnish the hardened and painted surface, preferably not in one layer. Due to this, the decorative coating will increase its resistance to various mechanical influences, and it will last for a longer period.

Beautiful examples in the interior

There are many interesting techniques for decorating a wall using brick plaster.

You can use the technique of contrast, combining dark gray areas of the "brick" surface with light ones.

Sometimes the interior is given additional carelessness by adding touches of a contrasting color to the plaster.

If similar sections of the wall are combined with other coatings, a combination of similar in color, but not absolutely identical shades will be successful.

If you decide to apply the plaster yourself, it is recommended that you strictly follow the instructions and professional advice provided.