Oksol Drying Oil: Technical Characteristics Of Natural And Combined Drying Oil, GOST 190 78, Brands And Manufacturers Of PV Composition

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Today drying oil is one of the main components of various putties and oil-based paints. And it is also very often used for processing any wooden surfaces, for impregnating plastered work areas, and even for sealing small cracks. This universal impregnation agent surprisingly combines many useful functions, which makes it in high demand.

Oksol drying oil is especially popular, the features and technical characteristics of which will be discussed below.

What it is?

Oksol varnish is a special impregnating mixture for processing wooden and plastered surfaces before further painting. It protects wood and plaster from decay and damage by bacteria. It can also be used for diluting oil paints. "Oxol" belongs to the category of semi-natural formulations.

More than 55% of the composition of the mass is vegetable oils, another 40% is a solvent, and the remaining 5% are driers, which contribute to thickening and rapid absorption of drying oil into the tree.

The following can be used as solvents by the manufacturer:

• "White Spirit";
• synthetic analogues of vegetable oils;
• pyroplast or pyrene;
• gum turpentine;
• nefras C4.

Driers are auxiliary components that are responsible not only for the good absorption of drying oil, but also for its rapid hardening. Fused, oily or fatty acid resins can be used as them.

The volume and type of solvents and driers used are regulated by special GOST standards developed for each type of additives separately.

Like other finishing and protective solutions, Oksol drying oil has its own unique technical parameters.

Specifications

At present, the production of Oksol drying oil is regulated by such a document as GOST 190 78. This normative legal act regulates the composition of these products, the conditions and place of their use, as well as other parameters.

According to him drying oil " Oxol" can be natural, belonging to category B … In this case, in its composition, most of it is taken by natural linseed or hemp oils. The main components of such solutions - vegetable oils - are allowed to be eaten in their pure form in everyday life.

Combined "Oksol" belongs to the PV category , most of its composition is corn or rapeseed oil. But the main difference is that they belong to semi-natural ingredients, they include synthetic additives in advance, that is, such oils are technical and cannot be used in food.

In addition, the GUEST states that this drying oil should have the following qualities:

• complete transparency;
• pronounced smell;
• maximum drying time - 3 hours;
• acidity - 6-8 units;
• viscosity - 18-25 units;
• the flash point in a closed crucible is exactly 32 degrees.

"Oxol" of group PV is suitable for indoor use only, and the product of category B can be used both indoors and outdoors.

The sale and transportation of drying oil can be carried out in containers made of special plastic or in iron barrels made of acceptable metal alloys. If a product does not meet at least one technological condition, it should not be allowed for sale, since it does not meet the requirements of GOST.

Consumption

The consumption of this product is calculated based on the amount of substance consumed per 1 m2 of surface.

The approximate consumption is:

• drying oils of category B - 80-120 g / m2;
• Oksoli PV - 100-150 g / m2.

These consumption rates are approximate and may vary depending on the type of surface to be treated and the number of layers applied to it. For each subsequent layer, a smaller amount of the composition is consumed.

It is also important to know that the consumption will increase when impregnating plastered or too old wood structures. The volume of consumption of Oksol varnish is also influenced by the method of its application - when using a brush, it is less than when using a roller.

Scope of application

Today drying oil "Oksol" is used in a number of cases:

• It can be used to paint wooden structures inside and outside of facades .… In these cases, the solution prolongs the life of the wood, reduces the level of negative effects of temperature changes and pathogenic fungi on it.
• For processing plastered facades before their further painting … In this case, Oksol helps to reduce paint consumption during final finishing, and also partially levels the work surface and protects it.
• For diluting oil-based paints … This allows you to increase the volume of paint, dilute the thickened substance without violating its technical qualities, and also use the resulting mixture as an impregnation and final solution at the same time.

It turns out that it is allowed to use Oksol varnish for processing wooden structures inside and outside the premises, as well as for impregnating plastered walls. At the same time, it is categorically impossible to use this solution for staining and impregnating floors.

Manufacturers

Drying oil "Oksol" is a demanded and popular finishing material, therefore today many brands are engaged in its production:

• Tex company releases this product for sale in a completely ready-to-use form. Drying oil is sold in containers weighing from 0, 4 to 8 kg in one container. The composition dries quickly, significantly reduces paint consumption and performs the work of the primer at the same time.
• LLC "Yamshchik " carries out the manufacture and direct sale of this impregnating composition belonging to the category of PV. It is sold in containers with a capacity of 0.8 to 20 kg. These products fully comply with the requirements of SanPiN and are manufactured in strict accordance with GOST.
• Drying oil of Isolate brand is considered one of the highest quality. Manufactured in accordance with accepted standards. It is sold in containers with a capacity of 0.5 to 200 liters. The disadvantage of this company is that it produces drying oil of this type only to order and in bulk.

• LLC "VESTA-COLOR " manufactures and sells drying oil of this type wholesale and retail. The goods of this brand are of high quality, affordable cost and high technical characteristics.
• PO "KHIMTEK " for over 20 years has been manufacturing and marketing these top quality products. Drying oil "Oksol" of its production always has excellent technical characteristics and an affordable price. It is sold in containers of various types, which allows each customer to purchase the most suitable packaging.

Linseed oil "Oksol" produced by all these brands in practice has proven its high efficiency and excellent quality, therefore, when purchasing such a product, it is recommended to first of all pay attention to these manufacturers.

Features and rules of application

This composition belongs to the category of fast-drying and fast-hardening substances, therefore, it requires adherence to certain recommendations when working with it:

• the mixture is sold in a ready-to-use form, but before its direct use, it is recommended to thoroughly mix the drying oil so that the active active ingredients are evenly distributed throughout the liquid;
• impregnation can be carried out only on dry, clean and previously degreased surfaces;
• it is necessary to apply the solution in a rather thin layer, using a wide brush or a small roller for this;
• the air temperature during work should not be below 15 and above 20 degrees, and the humidity should not be more than 75%;
• each layer of drying oil dries for about a day, so each new application should be carried out no later than 24 hours later;
• it is very important at the end of the work to remove from the room all tools and materials that have come into contact with drying oil;

• unspent mixture may be stored for no more than 12 months in a hermetically sealed container;
• during work it is recommended to use a respirator or a protective mask and rubber gloves;
• if the composition gets on the skin or eyes, it must be thoroughly washed off with plenty of water;
• when carrying out work in a closed room, it is imperative to provide fresh air to it;
• drying oil "Oksol" is highly flammable, so it should be used as far as possible from open sources of fire;
• when purchasing this tool, it is imperative to demand from the seller certificates of quality, safety and compliance with the requirements of GOST;
• this composition is allowed to be used for sealing small gaps. To do this, drying oil is mixed with sawdust in equal proportions and applied to the surface to be treated with a spatula.

Compliance with these simple rules and recommendations for the use of drying oil will allow the processing of wooden and putty surfaces as simply, quickly and correctly as possible, and will also ensure a positive work result.

Reviews

Drying oil "Oksol" is very popular both among ordinary people and professional craftsmen of finishing works.

Ordinary citizens always speak positively about this product. All buyers, without exception, note its high protective properties, ease of use and affordable cost. For many people, there is only one downside - a rather pungent and specific aroma. However, if you use a respirator or mask, this disadvantage can be easily eliminated.

Professional decorators support these positive reviews. They emphasize the low consumption of this drying oil, ease of use, high-quality end result and a wide range of its applications.

Based on these reviews and on the statements of the manufacturers themselves, one can easily conclude that the Oksol drying oil is today one of the best in its segment. Its use allows not only to reduce the final paint consumption, but also to prime the work surface, protecting it from various negative influences .… The main thing is to choose a high quality drying oil and use it in accordance with the given rules.