Hilti Polyurethane Foam Gun: How To Use And How To Disassemble After Using Fire Fighting Foam

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

The polyurethane foam gun is a professional builder's assistant and an indispensable tool for a beginner. Regular polyurethane foam with a nozzle will not allow filling difficult spaces, splashing from incorrect pressing or use, and a layman can completely ruin the surface. Foam is both insulation, adhesive and sealant.

Peculiarities

The gun can help in the following situations:

• when squeezing out the required amount of foam, which contributes to the application of an error-free portion of the substance;
• in saving material consumption: thanks to the gun, 3 times less foam is required than with a conventional nozzle on the cylinder;
• in adjusting the supply of material, depending on the size of the cavity to be filled;
• in adjusting the required foam flow: after releasing the lever, the foam supply stops, while no surplus remains;
• in preserving the remaining material: after the termination of work, the foam substance in the pistol does not freeze;
• in maneuvers when working at height: the tool can be used with one hand, which is very convenient if the builder is standing on a stool, step-ladder or holding something in the other hand.

It should be noted that the tool may fall during operation . But thanks to the metal base of the gun, the container with the foam will not break. In addition, it should be noted that a regular cylinder freezes in the open air, unlike a pistol.

Device

Thanks to the valve and the adjusting screw, as much foam is released from the cylinder as required.

Below is the composition of the pistol:

• balloon adapter;
• handle and trigger;
• barrel, tubular channel;
• fitting with valve;
• adjusting screw.

The device consists of three parts: a handle, a feeder and a cartridge retainer.

According to its frame, the pistol can be collapsible and monolithic . On the one hand, a monolithic structure seems more reliable, on the other hand, a collapsible model is easier to wash, and in case of minor breakdowns, it is easier to repair. Which one to choose depends on the builder and on the related characteristics of the device.

It is necessary to consider models with either a built-in ergonomic handle, or with an escutcheon included with it. It takes a long time to work with professional models, so it is important here that the hand does not get tired.

As you know, it is easier to clean metal from dirt, so the metal spout can be easily cleaned with an ordinary construction knife.

Manufacturer overview

The international holding Hilti has existed since 1941, has many branches, as well as a representative office in Russia. Produces tools, materials and accessories of high quality, in the price range above average, the products are intended mainly for a professional audience.

The company mainly specializes in rock drills and drills, and also manufactures high-end mounting guns.

The gun for polyurethane foam must be made of quality materials. If the pistol is made of metal, and the country of its production is China, this is not the best option.

The Liechtenstein-based manufacturer Hilti produces tools made of high-quality plastic, which will be several times more durable than metal counterparts. Plastic is much lighter, and such a pistol is quite comfortable to hold in one hand. Also, the tool from Hilti has an anti-slip handle, an increased pressure lever, which makes it comfortable to work with gloves, and has a fuse to prevent spontaneous flow of foam. Hilti belongs to the category of professional pistols, therefore the barrel of this tool is coated with Teflon.

You should not skimp on such an element as a foam gun - it can be purchased once, and it will last quite a long time.

Most often, when it comes to the Hilty firm, they mean both the foam and the manufacturer's pistol. The Hilti CF DS-1 is a fairly popular model among professionals. The tool adapter is suitable for all cylinders, even from other manufacturers.

Professionals, of course, advise working with the assortment of one manufacturer: and a gun, and a cleaner, and foam, but with the purchase of third-party cylinders, the Hilti CF DS-1 will not deteriorate. Pistol dimensions: 34, 3x4, 9x17, 5 cm. The weight of the tool is 482 g. The set includes a box and a passport for the product with instructions for use and a warranty for operation.

This model has a slim spout that allows you to work even in the most difficult to reach places. The unit has an adjustment that allows you to control the force of the foam shot. Suitable for fire fighting foam.

The body, made of high quality reinforced plastic, cannot be disassembled, the barrel is covered with Teflon . The place where the cylinder is installed is also covered with Teflon. It is only necessary to clean the barrel of the pistol using a special nozzle. Has an ergonomic handle, which facilitates the work of the master. The only caveat is that the pistol has a monolithic body, so it cannot be disassembled.

The device "Hilty" is used for one-component polyurethane foam, used for jambs, windows, doorways and other elements. Suitable for metal, plastic and wood surfaces. Helps with insulation and thermal insulation work.

It is believed that "Hilty" - the best tool of all polyurethane foam guns. The average price is 3,500 rubles for the CF DS-1 model. The warranty for such a tool is 2 years.

Advantages of the Hilti CF DS-1:

• fairly light weight;
• blocking from involuntary pressing;
• comfortable and large handle;
• thin nose;
• the ability to work in a lateral position (no "snorting");
• does not pass foam when dropped or deformed;
• long-term operation (up to 7 years).

Disadvantages of Hilti CF DS-1:

• does not have the ability to parse;
• large-sized;
• has a high cost compared to similar models.

Reviews

Despite the high cost, all users who have worked with this tool speak well of it and recommend it to colleagues and friends. Consumers note the convenience of the handle and the low weight of the unit. Also noted is the ease of cleaning due to the absence of a nut on the barrel nose and convenient storage - the foam does not dry out, even if the cylinder is screwed into the pistol, and it is not used for a long time.

All available reviews on the official website speak of the superiority of the Hilty pistol over its counterparts. Some consumers have used the tool for more than 4 years and have not experienced any difficulties while working.

Of the shortcomings, users single out only the absence of a collapsible design and a high price if you choose it for domestic use.

When buying, it is important to check whether the gun holds pressure - for this you need to ask the seller to run the cleaner through it. Every self-respecting store that is sure that it does not sell a low-quality fake should check the unit.

Usage

Professionals recommend that before starting work, wet the surface with a spray gun half an hour before applying the foam. This is necessary in order to improve polymerization. Surface and air temperature should be above 7-10 degrees Celsius, room humidity - more than 70%.

If a person is using a foam dispenser for the first time, then it is better to slowly try to press the release button, and only after he understands how to regulate the pressing force, you should start applying.

It is imperative to shake the foam bottle before use. After that, you need to carefully screw it into the adapter.

The foam tends to swell, so it should be applied carefully, occupying less than 50% of the cavity volume. You need to know that the Hilty pistol is specially designed for accurate work - you need to use the thin nozzle correctly.

Thanks to the ease of pulling the trigger, there should be no problem with consistent, uniform filling.

If, for any reason, foam "etching" occurs through the spout, then tighten the rear handle and the problem should be corrected. It is also possible to “etch” the foam from under the ball of attachment to the adapter. To solve this problem, when replacing the cylinder, you just need to "bleed" all the foam, clean the barrel and install a new cylinder.

It must be remembered that tricky areas foam first. Then you need to move from top to bottom or from left to right. The Hilti CF DS-1 can be rotated and does not have to be held vertically to make it easier to fill tricky areas and corners.

Cleaning

Manufacturers recommend purchasing cleaning cylinders from the same company as the foam itself, since their compositions are already pre-selected for each other. A cleaning cylinder is required to clean the inside of the device to dissolve the solidified mass that can impede further passage of foam. The cleaner required for this Hilty model is CFR 1 of the same brand.

You should be aware that if you remove an incompletely consumed cylinder from the gun, then the remaining foam will stain not only the user himself, but also the tool. The unit for polyurethane foam CF DS-1 can be kept with an unused cylinder for more than 2 months without any consequences.