Litokol K80 Tile Adhesive: Litoflex Mixture For Tiles With A Volume Of 25 Kg, Characteristics And Consumption Per 1 M2

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Tile adhesive should be chosen as carefully as the ceramic tile itself when setting up or renovating your home. Tiles are needed to bring cleanliness, beauty and order to the premises, and glue is needed in order to ensure its fastening for many years. Among other varieties, tile adhesive Litokol K80 is especially popular with buyers.

What kind of work is it suitable for?

The scope of K80 is not limited to laying clinker or ceramic tiles. It is successfully used for laying finishing materials from natural and artificial stone, marble, mosaic glass, porcelain stoneware. The glue can be used for finishing work in various premises (from staircases to the fireplace hall of the house).

It can be based on:

• concrete, aerated concrete and brick surfaces;
• fixed cement screeds;
• floating cement screeds;
• plaster based on cement or a mixture of cement and sand;
• gypsum plaster or gypsum panels;
• drywall sheets;
• old tile covering (wall or floor).

In addition to finishing walls and floor coverings in rooms, this substance is also used for outdoor work. The adhesive is suitable for cladding:

• terraces;
• steps;
• balconies;
• facades.

The layer of adhesive for fastening or leveling can be up to 15 mm without loss of fastener quality and no deformation due to drying of the layer.

The composition for fixing large tiles and facade slabs, starting with a size of 40x40 cm and more, is not used. It is also not recommended to use it for bases that are subject to strong deformation. It is better to use dry adhesive mixtures with latex inclusions.

Characteristics

The full name of the tile adhesive is: Litokol Litoflex K80 white. On sale it is a dry mix in standard 25 kg bags. Refers to elastic cement group adhesives. Possessing a high holding capacity (adhesion), the substance ensures reliable fastening of the facing material to any base.

The ductility of the adhesive does not allow the facing material to come off, even under conditions of stress between it and the base as a result of deformations from temperature or changes in the structure of interacting materials. That is why Litokol K80 is often used for flooring and wall cladding in public places with high loads:

• corridors of medical institutions;
• offices;
• shopping and business centers;
• train stations and airports;
• sports facilities.

This adhesive solution is considered moisture resistant. It is not destroyed by the action of water in bathrooms, showers and bathrooms, basements and industrial premises with high humidity. The possibility of finishing buildings from the outside using K80 proves the frost resistance of its composition. The positive characteristics of the adhesive material include the following features:

• the readiness time of the adhesive solution after mixing with water is 5 minutes;
• the lifetime of the finished glue without loss of quality does not exceed 8 hours;
• the possibility of correcting already glued facing materials is no more than 30 minutes;
• readiness of the lined layer for grouting - after 7 hours on a vertical base and after 24 hours - on the floor;
• air temperature when working with a solution - not lower than +5 and not higher than +35 degrees;
• operating temperature of lined surfaces: from -30 to +90 degrees C;
• environmental safety of the glue (no asbestos).

This glue is one of the best in terms of ease of use and durability of coatings. It is not for nothing that it is very popular among the population and is highly appreciated by the masters in the field of construction and repair. And the price is affordable.

Consumable indicators

To prepare an adhesive solution, you need to calculate its volume depending on the area of the facing work and the capabilities of a specialist. On average, the consumption of dry mix for a tile is from 2.5 to 5 kg per 1 m2, depending on its size. The larger the size of the facing material, the more mortar is consumed. This is because heavy tiles require a thicker adhesive.

You can focus on the following proportions of consumption, depending on the shape of the tile and the size of the teeth of the working trowel. For tiles from:

• 100x100 to 150x150 mm - 2.5 kg / m2 with a 6 mm spatula;
• 150x200 to 250x250 mm - 3 kg / m2 with a 6-8 mm spatula;
• 250x330 to 330x330 mm - 3.5-4 kg / m2 with a spatula 8-10 mm;
• 300x450 to 450x450 mm - 5 kg / m2 with a 10-15 mm spatula.

It is not recommended to work with tiles with a size of 400x400 mm and to apply a layer of glue thicker than 10 mm. This is possible only as an exception, when there are no other undesirable factors (high humidity, significant temperature drops, increased load).

For other heavy cladding materials and conditions of high load on the coverings (eg floors), the consumption of the adhesive mass increases. In this case, an adhesive layer is applied to the base and the back of the facing material.

Work algorithm

Litoflex K80 dry mixture is diluted in clean water at a temperature of 18-22 degrees at the rate of 4 kg of the mixture to 1 liter of water. The whole bag (25 kg) is diluted in 6-6.5 liters of water. Pour the powder into water in parts and stir thoroughly until a homogeneous pasty mass without lumps. After that, the solution should be infused for 5-7 minutes, after which it is thoroughly stirred again. Then you can get to work.

Mounting

The base for the cladding is prepared in advance. It must be flat, dry, clean and sturdy. In cases of special hygroscopicity, the base must be treated with mastic. If cladding is made on an old tile floor, you need to wash the coating with warm water and baking soda. All this is done in advance, and not after diluting the glue. The base must be prepared one day before work.

Next, you need to prepare the tile, clean its back side from dirt and dust. It is not necessary to soak the tiles in advance, as opposed to laying tiles on cement mortar. You will need a spatula of the correct size. In addition to the size of the comb, it should have a width that will cover up to 70% of the tile surface in one application when working indoors.

If the work is outside, this figure should be 100%.

First, the adhesive solution is applied to the base with the smooth side of the spatula in an even layer of small thickness. Then immediately - a layer with a spatula comb. It is better to apply the solution not for each tile separately, but on an area that can be tiled in 15-20 minutes . In this case, there will be a margin of time to adjust your work. Tile is attached to a layer of glue with pressure, if necessary, it is leveled using a level or markers.

The tile is laid by the suture method in order to avoid its breakage during temperature and shrinkage deformation. The freshly tiled surface should not come into contact with water for 24 hours. It should not be exposed to frost or direct sunlight for a week. You can grind the seams 7-8 hours after the base is tiled (in a day - on the floor).

Reviews

According to the reviews of people using the Litokol K80 glue mixture, there were practically no people who did not like it. The advantages include its high quality, ease of use and durability. The disadvantage for others is the high price. But good quality requires the use of quality material and high production technology.