2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Currently, there is a wide variety of models and designs of building stairs. They are necessary for installation and finishing work, as well as on the farm and in the repair of premises. The main requirements for them are durability and stability. All characteristics of building stairs and stepladders must comply with GOST 26877-86.
General characteristics
If earlier such stairs were made mainly of wood and therefore were very heavy, in need of constant maintenance and repair, now they are replaced by light and practical products made of aluminum with the addition of silicon, duralumin and magnesium, which gives the structures high performance properties. To prevent corrosion and protect against negative environmental influences finished stairs are covered with an oxide film.
In addition to aluminum, building stairs are made of steel, duralumin, various plastic mixtures and an alloy of aluminum with harder metals
To prevent the ladder from sliding on the floor or on the ground, rubber tips are attached to the lower supports, which add stability to it.
To work on the stairs it was convenient and safe, the steps are made flat, corrugated and wide . In total, construction stairs can have from 3 to 25 steps, and sizes - from two to 12 meters or more. The weight of the structures varies from 3 to 6 kg. It all depends on the device model.
Main types
Structurally, stairs are divided into the following types.
Non-sectional ladders
This is an irreplaceable thing in the country or in a private house. According to safety regulations, the length of such a staircase cannot exceed 6 meters, and the number of steps ranges from 6 to 18 . The fastening of the steps of the ladder is necessarily performed by flaring, the edges must be bent on the outside.
Two-piece ladder devices
They can be retractable and folding, they are actively used in construction, during electrical work, in the garden and in warehouses. They do not exceed 8 meters in height.
Three-section structures
Fixation of each section is carried out by means of a special locking rocker arm with automatic clamping. Each part of this design is called a knee, it can have from 6 to 20 steps. The total length of all three bends can be up to 12 meters. Two knees are attached to each other with straps and hinges, the third is extended or removable. Such ladders are widely used in industrial warehouses and industrial premises.
The maximum weight supported by such a structure reaches 150 kg.
Retractable ladders with rope or cable traction
These are practical, handy attachments that are great for both home and professional work at high altitudes.
Stepladders
Structures are double (stairs on both sides) or with a support frame. Usually, the two halves of the ladder are connected by a traverse - a wide strip made of dense material, which protects the ladder from spontaneous unfolding.
The height of the ladder is determined by the upper step or platform - according to the rules, it cannot exceed 6 m.
Mini stepladders
Mini stepladders reaching 90 cm are called stepladders or stools. They are often used for household chores, warehouses, supermarkets or libraries.
Transforming stairs
Usually, these devices consist of four sections, which are attached to each other by hinged mechanisms. So that the position of the sections can be changed relative to each other and securely fixed, each mechanism is equipped with a lock . The change of position from an extension ladder to a cantilever structure, a platform or a double-sided ladder takes no more than twenty seconds.
To give the structure maximum lateral stability, stabilizers are attached to its base - wide plastic "shoes".
Platform ladders
For safety reasons, it is mandatory for them to have metal handrails on both sides. There are usually 3 to 8 steps. There are often very convenient mobile options with small wheels at the base.
There are several types of platform stairs.
Mobile two-way
It has an L-shape, and the working platform is located above the top step. Easy to move and fix in place of work thanks to castors, each with its own stopper.
Sliding transformable
It resembles a stepladder with additional sections that can be used to change the height. This model has a special platform for placing the necessary tools.
Scaffold
Such a model is extremely in demand among professional builders and finishers, since it has a large and comfortable platform on which two or more people can easily fit and work.
The dimensions of the structure are easily adjustable, and the wheels make it easy to transport the device from place to place.
Towers tours
They are used to carry out high-rise works on the facades of buildings of any type. The structure consists of two ladders connected by metal ties. When starting to work on this ladder, you should make sure that its braking system is in good working order.
Selection Tips
The main points to focus on when choosing a construction ladder:
- where it is supposed to work on it and what will be the nature of the work;
- how often you plan to use it;
- how many people will work;
- storage space for the stairs after the end of work.
Considering all these factors, you can easily choose the best option that is suitable in weight, as functional and convenient as possible in work and during transportation, does not cause problems during storage and does not require constant maintenance.
Recommended:
Alumet Ladders: Characteristics Of The Transformer Ladder And Three-section Aluminum Ladders, The Choice Of Models With 4-5 And 6-7 Steps
Alumet ladders are portable ladders of high quality and reliable construction. What are the characteristics of the transformer ladder and three-piece aluminum stepladders? What are the most important selection criteria?
Construction Trestle: Features Of Folding Wooden And Aluminum Models, The Choice Of A Universal Construction Trestle For Carpentry Work
Features of the structure of the construction goat. What is its purpose? What varieties are there? What are the features of folding aluminum models? How to make a wooden structure with your own hands?
Profiles For Sliding Wardrobes (32 Photos): Aluminum And Other Types, Dimensions Of Profiles For Doors And Color, Vertical Narrow Thin Profiles And Other Models
What sizes and colors are available for sliding wardrobes? Features of aluminum and other types of door profiles. Vertical narrow thin profiles and other models
Construction Footwear: Winter Footwear With A Metal Toe For Builders, Work Boots And Other Types Of Safety Footwear. Which One To Choose For Work On A Construction Site?
What is construction footwear, what are its features? How to choose metal toe winter shoes for builders? What are the common models of construction shoes? How to properly care for safety shoes?
Construction Sand (29 Photos): Density Kg Per M3 According To GOST, Natural Medium Sand For Construction Work And Other Types Of Sand For Construction
Sand is a popular building material that is actively used in the construction industry. What is the density of the material (kg per m3 according to GOST)? What is included in the composition of sand and what are its characteristics?