Clinker Paving Stones (49 Photos): Dimensions Of Paving Slabs Made Of Clinker, Russian And Other Production. What It Is? Laying Technology On Concrete And Other Bases

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

With the use of clinker, the arrangement of household plots has become more aesthetic and modern. From the material in this article, you will learn what clinker paving stones are, what happens and where they are used. In addition, we will consider the main nuances of its choice and laying on different types of bases.

What it is?

Clinker paving stones combine unique aesthetics and functionality. It is a paving building material formed from chamotte (refractory clay), minerals and feldspars. The shade of the material depends on the type of clay used, the time and temperature of firing, and the type of additives included . The production technology is not much different from the manufacture of conventional ceramic bricks. The clay is crushed, diluted with water until a viscosity is obtained.

During production, the solution is passed through an extruder, then molded on special equipment. After that, the vibropressed paving stones go to drying and firing.

The firing temperature is 1200 degrees C. During processing, microscopic air bubbles emerge from the clinker. Decreases porosity, which reduces the coefficient of water absorption. The finished raw material for cladding acquires high technical characteristics:

• compressive strength is M-350, M-400, M-800;
• frost resistance (F-cycles) - from 300 cycles of freezing and thawing;
• the water absorption coefficient is 2-5%;
• acid resistance - not less than 95-98%;
• abrasion (A3) - 0.2-0.6 g / cm3;
• medium density class - 1, 8-3;
• slip resistance class - U3 for dry and wet surfaces;
• thickness from 4 to 6 cm;
• the approximate service life is 100-150 years.

Advantages and disadvantages

Clinker paving stones are practically "indestructible" building material. He has a lot of advantages over other cladding counterparts for covering roads . It is a strong and durable material, resistant to abrasion, weight loads, fracture and mechanical destruction. Clinker paving stones are chemically inert. It is able to withstand the action of acids and alkalis, corrosive liquids that are used when servicing vehicles. The material does not change its performance due to environmental factors. Does not fade under the sun.

It can have a different, evenly distributed shade without the use of pigments . The material is not sensitive to detergents. Environmentally friendly - does not emit toxic substances during operation. Inert to mold and decay. Clinker paving stones are considered a design tool. It creates competition for all other types of facing material for the arrangement of road sections. With maximum practicality, it looks aesthetically attractive, combined with all architectural styles. Its visual perception depends on the styling scheme, which can be very diverse. In this case, the coating has an anti-slip surface, and therefore its laying, in addition to the typical one, can also be inclined.

Clinker paving slabs do not absorb oil or gasoline. Any contamination from its surface can be easily removed with water . On the domestic market, it is presented in a wide range. Its cost varies from manufacturer to manufacturer. However, almost everywhere this is an expensive material, which is its significant drawback. Someone does not like the color range of clinker, although the color schemes allow you to beat the arrangement of the paths in the most extraordinary way. On sale you can find building materials in red, yellow, brown, blue.

Besides, clinker can be beige, orange, peach, straw, smoky . Its monolithic base protects deep layers from pigment washout. Therefore, it retains the freshness of its original appearance for a long time. It is easy to repair. A damaged element can be easily replaced with a new one. If there is no new one, you can simply turn the clinker over to the opposite side. An additional bonus of the material is the ability to lay on the edge and end.

Masters note: it is not difficult for professionals to work with clinker paving stones. In this case, the cladding provides for mechanical processing. However, beginners do not always handle the material correctly. And this increases the consumption of raw materials and hits the budget.

Applications

According to the scope of use, the material is divided into several types:

• sidewalk;
• road;
• aquatransit;
• lawn.

Depending on the variety, the material can be standard and textured . Each area of application has different directions. Clinker paving stones are used for paving city squares, sidewalk paths, parking lots and driveways to houses. It is bought for the design of the roadway, playgrounds (on the street). It is used to equip park alleys, garden paths on personal plots.

It is bought for paving areas near garages, shops, restaurants, cafes . The material is used to create curbs, cornices and stair steps, a blind area of the road. It is so popular that it is purchased for decorating the walls of restaurants and beer bars. It finds its application in the decoration of wine cellars. Clinker is used in typical and complex landscape design.

With its help, pavements, sidewalks and terraces are decorated . There are no puddles on such paths. If necessary, the covering can be disassembled and re-laid (for example, when pipes need to be laid). Also, paving stones are used as connecting links between the structure and the personal plot.

Form overview

Based on the type of geometry, clinker paving stones can be:

• square;
• rectangular;
• half (with a notch in the middle);
• crossbar;
• mosaic.

In addition, shaped paving stones are found in the product lines of manufacturers. It includes modifications of oval, diamond-shaped, polygonal shapes. Widely used forms are "honeycomb", "thread spools", "fleece", "cobweb", "clover ". Crossbars can be square or rectangular. They are used to arrange paths. The shape of the mosaic variety is different.

This material is used to create original ornaments when paving paths . Using material of different shades, it is possible to create colorful and bright surfaces in public places (for example, park areas). The assortment of manufacturers includes tactile paving stones. It is laid out among ordinary clinker blocks so that visually impaired people can navigate the terrain. It is distinguished by the presence of a relief of various shapes on the front side.

Dimensions (edit)

Depending on the scope of application, the parameters of clinker paving stones can be different (narrow, wide, standard, shaped). For example, modules for arranging pedestrian paths are 4 cm thick. Modules with a thickness of 5 cm are designed for a weight load of up to 5 tons . Modifications for a lawn have a thickness of 4 cm and holes for grass germination. The paving stones also have holes for water drainage.

Dimensions may vary depending on the standards of different manufacturers . For example, the standard parameters of Feldhaus Klinker paving stones are 200x100 mm with a thickness of 40, 50, 52 mm (less often 62 and 71 mm). Its approximate consumption is 48 pcs. / m2. In addition, the clinker size can be 240x188 mm with a universal thickness of 52 mm. Clinker mosaic parameters are different. In fact, this is a 240x118x52 slab, split into 8 identical parts, each measuring 60x60x52 mm. Paving stones of the Stroeher trademark have dimensions of 240x115 and 240x52 mm.

Standard parameters have their own marking (mm):

• WF - 210x50;
• WDF - 215x65;
• DF - 240x52;
• LDF - 290x52;
• XLDF - 365x52;
• RF - 240x65;
• NF - 240x71;
• LNF - 295x71.

The thickness depends on the expected load. The thickness of the shaped blocks with perforation is 6.5 cm. There are about 2-3 standard sizes in the collections of different manufacturers. Some brands have only one universal size.

As for the most demanded standard sizes, this is a module with parameters 200x100 mm . About 95% of the total amount of such raw materials is offered on the domestic market.

The universal sizes make it easy to select materials from different suppliers. Allows you to easily lay paving stones in different areas, equipping different paving surfaces nearby (for example, pedestrian areas, entrance and parking).

Popular manufacturers

Many companies in our country and abroad are engaged in the production of clinker paving stones. At the same time, the most expensive product on the building materials market is clinker produced in Germany and Holland. German paving stones are considered the highest quality, but also the most expensive. This is due to shipping costs.

The products of Polish manufacturers are considered budgetary. At the same time, its technical characteristics are not inferior to analogues, for example, of Russian production. Let's note several suppliers of high-quality paving stones, which are in demand among the domestic buyer.

• Stroeher manufactures high-quality heat-resistant clinker that meets international standards. The brand's paving stones do not need any special care, they are guaranteed for 25 years.
• UralKamenSnab (Russia) offers its customers high quality paving stones at a favorable price.
• " LSR" (Nikolsky plant) , realizing paving clinker paving stones with frost resistance index F300, intended for use in different conditions.
• FELDHAUS KLINKER - a leading German manufacturer supplying the construction market with high quality materials with excellent performance characteristics.
• CRH Klinkier Is a Polish trade mark that sells paving stones at reasonable prices. Offers to the attention of buyers collections from classic to antique designs.
• MUHR another German company producing the highest quality products. Differs in a variety of materials.

Secrets of choice

The best paving stones are those made of clay with a minimum content of various inclusions (chalk, shale, gypsum). Therefore, buying German-made products is an ideal solution. This clinker is made from a homogeneous, refractory, plastic clay.

The choice of building material is determined by the operation . For the arrangement of access roads, modules with a capacity of 5 cm or more are chosen. For pedestrian paths, options with a thickness of 4 cm are optimal. The color of the paving stones should be consistent with the surrounding building elements. If you need a universal option, then it is better to take a gray material. It will fit perfectly into any landscape, regardless of its style.

When choosing a supplier, you need to give preference to the products of a well-known manufacturer engaged in the sale of building materials. Products from renowned manufacturers comply with strict European standards . It is certified, presented in a wide range. Differs in decorative variety. Don't take cheap clinker.

Low price is a messenger of poor quality building materials . Such cladding is performed in violation of production technology. It does not meet high technical specifications. When choosing, one has to take into account the type of foundation for paving, landscape features, the design of the building, near which it is planned to lay.

It is important to clearly define the territory, take material with a small margin. To enhance the characteristics and endurance of clinker, it is bought together with natural building mixtures.

Laying methods on different substrates

Surface design methods can be very diverse. Depending on which side the material is laid on and what pattern, several options are distinguished. Styling can be:

• block two-element;
• block three-element;
• diagonal (with and without blocks),
• Herringbone, around the circumference;
• brick with a shift;
• linear (with and without dressing);
• half and three-quarter with dressing.

The techniques for laying clinker paving stones depend on the base on which the building material is mounted. However, any paving technique requires proper foundation preparation.

Initially, they mark the area for installation . After the territory has been selected and designated, soil is removed from the marked area (depth from 20-25 cm). Move it to another place. The roots are removed, the earth is leveled and tamped. Consider how pillows are made from different materials.

On sandy

Laying on the sand is used in the arrangement of pedestrian paths. After preparing the base, sand is poured onto the bottom of the site (layer 5-10 cm). Level it with a slight slope. The sand is moistened, then rammed with a vibrating plate.

Mix sand with cement (6: 1), make a carrier layer, level it . After that, the curbs are installed (they are attached to a cement-sand mortar). If necessary, dug trenches for the curb in advance and fill them with working solution. A carrier layer (10 cm) is distributed between the side stones, it is rammed.

On concrete

Preparation of a concrete base is needed when arranging a coating for a car entrance. Crushed stone (10-15 cm) is poured into the prepared bed, leveled with a slope, tamped . At the borders, a wooden formwork from boards and stakes is mounted.

The fenced area is poured with a layer of concrete (3 cm) . Reinforcement network is being laid. Another layer of concrete (5-12 cm) is poured on top, the slope is checked. If the pouring area is large, expansion joints are made every 3 m. Fill them with elastic material. Dismantling the formwork. Borders are mounted on the borders (placed on concrete). The screed is covered with fine sand. The technology allows clinker to be laid on glue.

For crushed stone

A layer of crushed stone (10-20 cm) is poured into the prepared base, rammed with a vibrating plate. It is imperative to do this with a slight slope. The sand is mixed with cement and a curb is placed on it. The area between the curbs is covered with a dry cement-sand mixture (layer thickness 5-10 cm ). The site is leveled, observing the slope.

Installation technology

It is necessary to install paving stones correctly on any type of base. Any violation will shorten the life of the coating and speed up the repair time. It is important to provide for the drainage of water from the surface of the paving stones. Modern paving systems can be used for installation.

They consist of tramline drainage mortar, tramline slurry to enhance clinker fixation . In addition, the system includes a grout-grout for filling joints. It can be waterproof or waterproof. These systems are used when laying paving stones on a compacted bearing layer of gravel or crushed stone.

Laying on a prepared substrate

After preparing the pillows, they are directly involved in the laying of paving stones. On the sand and crushed stone base, the paving stones are mounted immediately after the creation of the bearing layer. You need to put it correctly from the corner or the beginning of the track. If it is laid in a radial way, start from the center . To hold the elements, a layer of sand (3-4 cm) is poured onto the supporting layer. It is not rammed, but leveled at a slight slope. The elements are set in sand and leveled with a mallet. Each module is deepened by 1-2 cm, trimmed along the curb tile. Laying is carried out according to the selected scheme. The horizontal of the pavement is regularly checked taking into account the slope.

When paving stones are mounted on concrete, a sand pad or glue is used . In this case, you need to wait until the concrete screed is ready, which takes at least 2 weeks. After that, the clinker is laid according to the previously described method. During installation, the identity of the width and length of the butt joints is monitored. If the building material is put on glue, the principle of operation resembles tile cladding. During the cladding, a paving slab composition is used. It is bred according to the instructions. Next, they are distributed by means of a notched trowel onto the base and the module itself.

The elements are slightly pressed into the base, laid with the same seams, observing the slope in level. At the stage of finishing work, the joints are filled . To do this, use a special mixture (grout) or a mixture of sand and cement. Use a dry composition or a ready-made solution. In the second case, the seams are filled completely to the level of the top. Remove excess material with a dry cloth.

When filling the joints in the first way, make sure that it is tight . The dry mixture is driven into the cracks with a brush or a broom. After that, the finished track is poured with water, leaving for 3-4 days so that the composition grabs and completely dries. If after watering the composition has dropped, the procedure is repeated.

To make the composition even, it is stirred in the most thorough way.