Walk-behind Tractor In Winter: Preparation For Storing The Walk-behind Tractor In A Cold Garage. Do I Need To Heat The Oil To Take A Walk-behind Tractor For Winter Fishing?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

A walk-behind tractor is a versatile unit that copes well with a number of difficult jobs. Like any special equipment, it requires careful handling and operation. It is not difficult to properly preserve the walk-behind tractor for the winter. The main thing is to approach the process of preparing equipment for the cold season with all responsibility.

Why is it necessary to preserve?

The walk-behind tractor should by no means simply be left in a cold garage until the onset of heat. It is necessary to preserve, store carefully and correctly. In the worst case, after the snow melts, you simply cannot start the unit. Simple recommendations for storing the walk-behind tractor in the winter will help prevent mistakes in this matter.

1. Pay attention first of all to the geared motor. Change the oil - the previous one can also be used, but only if it is in a “good” condition and filtered.
2. We diligently clean the air filters and fill in engine oil.
3. Unscrew the candles, add oil to the cylinder (about 20 ml) and "manually" turn the crankshaft (just a couple of turns).
4. We thoroughly clean all parts of the walk-behind tractor from the accumulation of dust and dirt (do not forget about the most inaccessible places). Further, the body and spare parts of special equipment are covered with a thick layer of oil, which will protect against corrosion. Sharp edges are sharpened.
5. If the walk-behind tractor is equipped with an electric starter, then we remove the battery during winter storage. And also do not forget about regular charging throughout the entire "frosty period".
6. We cover the unit, or rather, its painted parts, with polish. This will help protect the product from decay. It should be noted that we apply the polish only to a clean unit, otherwise there will be no help from it. With the onset of spring, the coating layer should be washed off.
7. Do not forget to open the fuel supply valve of the equipment a couple of times a month and pull the starter handle 2-3 times.

What do they do with gasoline in winter?

Frosts require you to take seriously the preparation of the fuel tank. The opinions of experts in this case differ. Complete draining of the fuel implies the formation of corrosion. However, with a full tank of the walk-behind tractor, which is in storage, the risk of fire increases sharply, which can lead to irreparable consequences.

Operation of equipment in cold weather

Motoblocks are widely used in the cold season. A motor cultivator with a 4-stroke gasoline (or diesel) engine will cope with snow removal.

The universal unit is capable of performing the following functions in winter:

1. acts as an additional source of electricity (power adapter);
2. indispensable for procurement work (garbage removal, wood preparation);
3. removes snow from the territory;
4. means of travel for fishing in winter, and the trailer will serve as a storage place for fishing rods, a tent and a sleeping bag.

Many people wonder whether it is necessary to heat the oil in order to take the unit for winter fishing. The process of heating the engine is necessary when turning on the walk-behind tractor in the cold. So, let's consider the features of turning on the unit in the winter.

1. Modern walk-behind tractors imply cooling (air). This simplifies their operation at subzero temperatures. However, the disadvantage is the rapid cooling of the engine in winter.
2. For the walk-behind tractor, there are special covers for insulation. This will help maintain the "desired" temperature.
3. In winter, the engine must be preheated (sprinkling with hot water diligently).
4. Gearbox oil tends to thicken at low temperatures. Therefore, it is best to use its synthetic types or rather liquid structure.

How to make a snowmobile?

Buying a vehicle through snowdrifts is a costly business. There is an exit! A simple and affordable solution would be to convert the unit into a snowmobile. Such a unit will "cope" with fast driving on snow and mud (in spring).

When designing a homemade all-terrain vehicle, we pay attention to the wheeled chassis . When creating an all-wheel drive "beast" it is necessary to attach sprockets to the axles and connect them with a chain. A conveyor belt is suitable for tracks.

Ideally, it is better to purchase ready-made chassis (modular). "Winter wheels" should be wide and have a large diameter.

The frame, which can be put on the all-terrain vehicle, is made of steel angle. The weight of the trailer must not outweigh the body of the tractor.

Most motoblocks are suitable for work with all types of snow cleaning equipment . One of the options for using a motor-cultivator involves attaching a rotary snow blower. This device perfectly cleans snow with the help of spiral shears. Snowdrifts "fly away" at a distance of up to 7 meters. The gripper of the device works from 60 to 120 cm.

How to prepare special equipment for the upcoming season?

After the unit has successfully “survived” the winter period, we begin to prepare it for the new season and loads. This procedure is divided into several stages.

1. The fuel is being replaced. Drain off the remaining gasoline and add a new one. In winter, gasoline could turn sour.
2. Checking the candle. Its position must be stable, without air access.
3. We open the fuel tap.
4. Keep the air gap lever closed until the engine warms up.
5. We expose the ignition to the "on" mode.
6. We pull the starter handle. As soon as we feel "resistance", we make a sharp movement "towards ourselves."
7. We are not afraid of smoke. It is released when the oil is burned.

If you notice significant malfunctions in the operation of the walk-behind tractor after "winter storage", contact the specialists.