Hiller Cultivator: How To Choose A Model For Hilling Potatoes? Technical Characteristics Of KOH-2.8 And Three-row Model. Subtleties Of Operation

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

More recently, cultivators-hillers were used only in large farms, they were hooked onto tractors and cultivated fields with sowing crops. Today, this technique is presented in the industry from miniature to volumetric models and is a good assistant for both owners of large farms and amateur gardeners who process their summer cottages and personal plots.

Peculiarities

Cultivators are agricultural machinery designed to cultivate the soil. As independent mechanisms, they can run on gasoline, electricity or manual traction. They are divided into two main types: steam, which prepare the land for sowing, and row-crop, which cultivate the planted plants. Ridging cultivators belong to the second type. They loosen the soil, sprinkling (sprinkling) the plants evenly, simultaneously cutting and grinding weeds, and saturating the soil with oxygen.

Ridging cultivators can be additional equipment to heavier equipment, for example, a tractor . Hillers are used to care for different types of plants, but they are most applicable on potato plantations, since working with tubers is especially laborious.

Views

Hillers are attachments that help hilling plants. In addition, such a nozzle is used to create furrows, placing seeds in them, followed by filling them with loosened soil. Hillers can be of different types.

• Lister . They are a model with a constant row width, that is, two fixed wings look like a monolithic structure. With the help of such a nozzle, hilling occurs with the formation of a row 20-30 cm wide. A cultivator equipped with lister equipment does not change the width of the soil, and therefore the row spacing will have to be adjusted to the existing equipment.
• Variable width accessory working knives have an adjustable design and are able to move, changing the width between the rows at the discretion of the owner. For such a nozzle, the cultivator must have a capacity of at least 4 liters. with.

Unfortunately, part of the earth, when hilling, crumbles back into the holes, so doing such work can be called energy-intensive.

• Disc hillers can be considered more effective in this case . Those who have tried to work with them are unlikely to prefer other equipment. When choosing disk nozzles, you should pay attention only to high-quality models made of alloy steel of the largest sizes. Bulk ridges they turn out to be much higher.
• Dutch type hiller does not match the performance of the disk, but it is much better than conventional equipment, since the wings are able to move not only in turns, but also vertically.

This eliminates unnecessary work and reduces energy consumption for hilling.

• Active (propeller) hiller in efficiency it can compete with disk. With the help of his propellers, he loosens the soil, grinds the weeds. Its embankments are of better quality and air.
• Plow-shaped hiller often used to work with potatoes. It can be single-row and double-row, that is, it differs in the number of rows processed. With a two-row hiller, the work is more stressful, it is more difficult to manage it. Its wheels should be replaced with large diameter lugs.

On equipment with a single-row hiller, you can leave rubber wheels.

Hilling potatoes

Hiller cultivators are most often used for processing potatoes. When green bushes begin to form over the garden bed, the moment comes for hilling, that is, pouring soil under each plant. During this procedure, weeds are ground, and young shoots receive soil enriched with oxygen and nutrients. The embankment will retain more moisture when watering. It will to some extent protect the bush from parasites and reduce the risk of potatoes getting to the surface, which is fraught with the production of solanine (staining the tubers green).

To use a two-row plow-shaped hiller, the rubber wheels of the technique are changed to lugs . They do not skid on the ground, they clearly maintain the working row. On the hiller, the maximum width of the soil grasp should be set, then, passing in the aisle, the equipment will not cling to potato bushes, and the soil sprinkling under the plants will become uniform and of high quality.

When working with a single-row hiller, the rubber wheels do not need to be changed, they make it easier to walk around the site. The width of the grip should be set according to the possibilities of the crop rows. For processing potato shoots, it is more convenient to use a disc hiller - it produces high mounds, the ridges of which almost do not crumble.

Hilling potatoes is easier to carry out on wet soil

But action should not be taken immediately after the rain, when all the dirt is still collected on the surface, but only after the earth has received and absorbed moisture, but has not completely dried out.

Choice of technique

Hillers cultivators are produced by the industry of various types. To make the right choice, you need to know the size of the area that will have to be processed. And you should also take into account the density of the soil and what kind of plant culture you have to deal with.

The most common type of cultivator-hiller is one-, two-, three-row . Some models can handle more than 3 rows in one pass. For a small plot, a hand-held cultivator is enough, miniature, maneuverable, capable of getting into the most inconvenient places. The larger the landing area, the more powerful the equipment should be. Here are examples of the most popular cultivators-hillers. Having studied their technical characteristics, you can make a choice based on the needs of your agricultural land.

Hinged KON-2, 8

The equipment is aggregated to the tractor using couplings or by the hinged method. The cultivator has wheels with rubber tires, which, while driving, are capable of self-cleaning from the adhesion of wet soil. The mechanism is equipped with four-row hillers for pre-emergence and post-emergence tillage. Having a special suspension, the equipment is capable of repeating the structure of the relief, which significantly improves the quality of earthworks.

The cultivator works simultaneously with the harrowing and hilling system, and can also produce mineral fertilizing of plants.

Equipment KON-2, 8 is capable of performing the following tasks:

• cultivate virgin soil (pre-planting harrowing);
• to form a row spacing (four for one run of the tractor);
• harrow after plant emergence;
• huddle potatoes, forming high ridges;
• simultaneously with other work, apply fertilizer to the soil;
• cut and uproot weeds;
• loosen and grind the soil.

The design of the hiller allows you to adjust the row spacing and the depth of entry into the soil of the working elements. Side cutters protect the bushes from damage.

Bomet (Poland)

The equipment weighs 125 kg and is equipped with three hillers for the care of root crops, as well as duckfoot and loosening tines. Hillers are able to form ridges up to 60 cm, loosen the soil, remove weeds, and apply fertilizer. Row spacing - 50-75 cm.

Ridge former Grimme GH 4

It has three types of hillers for use on different soils: light, medium-heavy, and is also used for working with seedlings. The equipment is able to change the height and rotation of the ridge, which helps to keep fruit out of the surface.

Rigid cultivators make hard farming work easier . Correctly exposed equipment will process the soil with high quality, evenly apply fertilizer to it and become an indispensable assistant in caring for plants.