Electric Lopper: How To Choose A Long-handled Garden Chain Lopper For Pruning Trees? Features Of Bosch Models

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Every gardener can say with confidence that it is difficult to do without special tools when processing trees. One of the most popular tools for gardeners is the electric lopper. It is an electronic version of a conventional manual pruner, it has a specific handle, the length of which can be adjusted.

Tool characteristic

Such a unit is quite efficient. It is able to cut even the thickest branches (with a radius of up to 50 mm). Thanks to the adjustable handle, the foreman can work at high heights without using a ladder. The speed of work becomes much higher without loss of quality.

This device is available in various variations

• Rod lopper . Thanks to the specific design of the handle, the operator will not feel fatigue in the arm muscles for a long time. There is a pulley inside the holder. Thanks to him, you can increase the productivity of the structure and cut branches with a diameter of up to 3-4 cm in a couple of approaches. The approximate height is 3.5 meters. An additional boom can be attached if you need to use the tool at a height of more than 5 meters.
• Telescopic lopper . The peculiarity of the device lies in its small size. Consequently, the delimber is very convenient to store and transport. When unfolded, it allows you to carry out garden work at a height of more than 5 m. The ratchet is activated by a special switch on the holder. Such a lopper is capable of making a perfectly straight cut. Many manufacturers also offer more functional models. They are equipped with an electric saw.
• Chain lopper with short handle . This device is an electronic version of the pruner for cutting low branches. The start lever is also located on the holder. You need to place a branch between the blades and turn on the device. The chain mechanism will do all the work for you: the incisors will close and a cut will take place. Long handles provide comfortable work on cutting branches, thanks to which the speed and efficiency of the process is increased. At the same time, during operation, no special efforts are required.

All blades are divided into two groups: contact and flat . The first option involves the location of the incisors on the same line. The branch is placed on the border of two blades. The cutting takes place by squeezing. The flat type is similar to conventional hand scissors: the branch is positioned between the incisors and is removed by a shearing action.

Such a mechanism can only function when connected to a power line. Therefore, before starting to work, you should consider buying extension cords.

Not in all cases it is possible to connect the device to the network. In this situation, cordless loppers come to the rescue. They are even more compact, but in terms of characteristics they are much inferior to network models.

Every company is attentive to operator safety. To this end, all manufacturers equip their products with a starter protection function against unplanned start-up.

Advantages and disadvantages

Electric loppers, like any other electrical engineering, have both positive and negative sides.

Pros:

• the unit operates on electricity, and it is much cheaper than any fuel;
• no physical strength is required for the normal functioning of the device;
• the design has small dimensions, low weight, and also does not emit any noise;
• with careful use, the tool will last a very long time;
• it is possible to work at a height of more than 5 meters;
• thanks to the rotary system, you can cut several branches at one time;
• the unit is environmentally friendly, does not emit smoke or exhaust gases.

Minuses:

• when working at a height, the power cable gets in the way in most cases;
• the nearest outlet may be too far away;
• the devices have low power when compared with gasoline competitors, although such characteristics are quite enough for home use.

How to choose?

Before purchasing this item, each gardener must decide for himself which trees to work with. If you need to cut a small bush or young tree, then the planar option is perfect. It does not require physical strength, the structure will do everything by itself. Old trees with a hard crown are cultivated with contact pruners. They allow you to make a neat cut without damaging the bark.

Before purchasing, you should consider who will use the unit . Men usually do not care what weight or size the lopper has, but for the fairer sex and the elderly, this moment is a very important selection criterion. Also check the insulation of the holder.

An insulated handle will be useful if there are power lines nearby, as well as in high humidity.

Popular models

In today's world, electric loppers are in great demand. The world famous brands Patriot, Stihl, Ryobi, Gardena, Greenworks, Black & Decker and many others are engaged in the production of instruments. Below we will consider the models that are most popular in Russia.

525 PT5S

Husqvarna is a worthy representative of high-rise loppers. The country of origin is Sweden. The most common variant in Russia is the 525 PT5S model. The device is in great demand among professionals. It is distinguished by its maneuverability and small size. Thanks to the powerful engine, the structure picks up speed in a matter of seconds.

The case is shockproof from all sides. You don't have to manually lubricate the chain, everything happens automatically. The unit weighs 7 kg. The cost in Russia is around $ 650-700.

AHS 45 16

Bosch AHS 45 16 is a striking representative of small electric loppers for home use. The tool weighs 2600 grams. A motor with an internal cooler is installed here, so you will never encounter overheating of the instrument. The manufacturer provides for the installation of an ergonomic holder, taking into account the anatomical features of the palm. There is a special shutter to protect the master.

The blades are double-sided, equipped with an anti-collision function with solid objects. The manufacturer creates the cutters using special laser technology. They do not grind for a long time. The tool has a low price (60-70 dollars).

NTE 60

For use in urban environments, a special model of electric trawlers from the manufacturer Stihl is suitable. The model is called NTE 60. To begin with, it should be noted that the unit fully complies with all sanitary standards. It emits a low noise (up to 94 decibels). This device has become widespread among landscape designers. Thanks to him, you can give the crown a decorative appearance. Blades with a length of 30 cm are installed here.

Thanks to the soft starter, it is possible to avoid jerking during operation. Thanks to its sophisticated modern design, the device fits comfortably in the hand. The manufacturer provides a special belt that acts as an additional retainer. The unit weighs 4500 grams and has a high cutting speed. The cost of construction in Russia is from $ 300.

BEHTS 301

Black & Decker has a long history of making electric loppers. The wire model BEHTS 301 is especially widespread in our country. The unit is capable of working with an average thickness of branches of 35 mm. To allow the master to fully control the movement of the cutters, two holders are installed here. Also, the manufacturer provides for the installation of a large starter. It runs along the entire length of the handle, which makes starting the tool more comfortable.

There is a protection function against unintentional inclusion. The holder has a special flap for the safety of the skin of the hands. Branches can be cut in any position due to the double-sided blades. The design is environmentally friendly, small-sized, weighs 2500 grams. The cost in Russia is from $ 80.

HT 5560E

The Carver HT 5560E is a versatile lopper specialized in the creation of beautiful ornamental shrubs and trees. It is designed for cutting small diameter branches (up to 25 mm). The tool is diamond-ground, thanks to which the operator can make a perfectly straight cut without damaging the bush. The manufacturer provides a special cable with protection against accidental disconnection from the power supply network. The design can be easily transported and stored in a special case that comes as standard.

The handle has a flap for the safety of the hands of the master. There is an additional handle for greater comfort while working. The mass of the device is 4400 grams, the cost is from $ 50.