2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
The striking wall clock is an adornment of any classic interior that has not lost its popularity over the years. In addition to its luxurious appearance, the device is distinguished by its ease of use.
Device and principle of operation
The striking wall clock is distinguished not only by its aesthetics, but also by its precise mechanics. They work at the expense of their own energy source, which eliminates the need to purchase batteries or place a structure next to an outlet. Functioning can occur due to the presence of a wound spring in the drum, a weight lifting mechanism or a special quartz crystal. The main advantages of striking watches are:
- reliability of the working mechanism;
- creating a pleasant, cozy sound;
- the presence of a variety of designs, sizes and body shapes.
The practical device is perfect for showing the current time. It is also worth noting that it is often equipped with an additional shelf for small items or even a safe.
It is necessary to separately mention the battle . This function is associated with the movement mechanism, therefore it operates at a specific time, beating the number of hours indicated by the hands. For the implementation of the "special effect" involved are from 1 to 8 hammers, which press on 1, 2 or 3 special springs. It happens, however, that 8 hammers are pressed on 8 springs to signal every quarter of an hour.
The springs themselves look like steel wire coils.
Some modern chiming models are equipped with gongs, which are mounted horizontally or vertically inside the case and are capable of emitting pleasant-sounding signals. It is important to maintain a certain distance between the hammer and the point at which it touches the spring . If the sound is unpleasant, the problem may be too tight contact between the hammer and the spring. A weak sound signal is the result of the distance between the hammer and the spring being too great, and therefore the impact is weak, or the problem is that the sound element is not properly attached to the housing. The fight and travel mechanism work well until the winding of both springs is completed.
Varieties
As a rule, the antique clocks still present in many apartments are mechanical. They consist of the following elements:
- an engine, presented in the form of a weight or a spring;
- transmission mechanism of gear wheels;
- a regulator responsible for uniform movements;
- a descent that transmits pulses from the engine to the governor.
It is the regulator who is responsible for the fact that antique designs are still doing their job successfully. Old clocks are used to decorate classic interiors, especially when it comes to a living room with soft armchairs, a fireplace and a lot of textiles.
The optimal background for antique walkers in a wooden case is brown, noble green and burgundy shades, which create a contrast to the case itself.
Modern retro-style clocks are also considered to be no less popular. They have the necessary touch of antiquity, but are much cheaper and require much less careful maintenance. The models are usually characterized by a minimalist design, as well as the use of large Roman numerals. The designs will perfectly complement not only the classic interior, but also the modern one.
If we are talking about specific models, then, of course, we should mention the products of the Soviet brand "Yantar", or "OCHZ ", which is the result of the activities of the Oryol watch factory. The production of such watches was carried out from 1954 to 1992, so today they are especially appreciated by lovers of historical finds. As a rule, the age of "Yantar" found at a flea market is at least 25 years old. The fight is carried out once every 30 minutes.
German mechanical striking watches are characterized by high precision and excellent quality. Frederich Mauthe Schwenningen has long been one of the most popular wall mount companies . (created in 1844). The first striking watches appeared in 1900, and for almost a century they were successfully exported all over the world. The company was one of the 5 largest watch manufacturers in the world, but closed in 1976 due to bankruptcy. Another German company known all over the world was Gustav Becker, which was born in Germany in 1847. Her watches were especially appreciated for their high-quality movement and noble appearance.
The wall clock of the Berlin company Zentra was distinguished by its beautiful design and unusual sound accompaniment . It is impossible not to mention the Hermle company, which has been leading the market for wall-mounted combat equipment for more than a hundred years. The company was founded in 1922, and today it unites several factories that create not only watch devices, but also spare parts for other brands. The case of the structures is designed in a classic style, but it can be additionally decorated with a neat decor, for example, a painted dial.
Instructions for use
The use of a wall clock with striking begins with the correct setting of the device. The accuracy of the stroke and the durability of use depend on how correctly this procedure is carried out. If the clock suddenly stops, the first step is to check the position of the weight suspension cable and whether the pendulum is well installed. The tolerance for this design is 30 seconds per day. Otherwise, a mandatory adjustment of the device is required.
The spring is wound using a key that turns clockwise . It is important to rotate the key rather slowly, as sudden movements can lead to breakage. The launch of the pendulum must be accompanied by a steady sound that counts down the stroke. Lack of rhythm signals an incorrect adjustment.
After finishing work, you should take care of the tightly closed door, otherwise dust will begin to accumulate inside the watch.
If the accuracy of the stroke is impaired, then the reason may lie in the wrong number of swings of the pendulum. It is adjusted by moving the lens along the pendulum rod. For a lagging mechanism, you will have to move the adjusting nut up, and for a hurrying one, on the contrary, lower it. If the striking clock has stopped, then it would be more correct to contact a specialist, and not try to solve the problem on your own.
After the clock is in operation, it is recommended to wait a few days and count the daily error . To obtain the required figure, the difference in accuracy is divided by the number of days. For example, if a lag of 8 minutes occurs in 4 days, then the error per day will be equal to 2 minutes. One turn of the adjusting nut approximately equals from 30 seconds to a minute, therefore, having found out this parameter in the instructions, it becomes clear how many turns will be required.
Correct care
If you handle your watches with care and provide them with constant care, then they will serve for many years without any problems. First of all, it is important to carry out the installation in such a way that the device shows the correct time. The body must be securely fixed to the wall, and the pendulum must be hung on the rod block with extreme care. Align the watch immediately with horizontal surfaces. If the watch needs to be moved, the transportation procedure should begin with the removal of the pendulum. Then the body is transferred, the pendulum is suspended, and the clock is restarted.
After placing the clock on the wall, it is necessary to slightly move the pendulum left and right until the ticking is absolutely accurate . After the components are fixed with screws, you need to set the minute hand to 6 or 12, provoking a fight. By moving the minute hand and listening to the battle ring out every hour, you can get to the exact time. The clock then starts, but not until the very end.
Immediately you have to calculate the possible deviation and adjust the accuracy.
The striking wall clock can only be operated in a dry and well-heated room . It is strictly forbidden to place them where chemicals or elements that can corrode the case are stored. Carrying a watch with a suspended pendulum is prohibited, as this may cause breakage.
The watch mechanism is necessarily coated with a special oil of the MTs-3 or PS-4 brands. The oil is valid for 2-3 years, after this period it will be necessary to clean and relubricate. The use of other oils is discouraged . It is also important to regularly remove dirt from thickened oil, which negatively affects the accuracy of the watch. The housing should be cleaned with a dry cloth; the use of water is unacceptable. It is worth mentioning that, if possible, repairs and even lubrication should be trusted by a specialist, since your own actions can lead to the termination of the warranty period.
Recommended:
Cuckoo Clock (40 Photos): Mechanical, Wall, Old Clock "Mayak" From The USSR. The Birthplace Of The Clock And The Size Of The Pendulum. What Is The Name Of?
Clocks can be very different: wall, floor, fireplace, table, tower. Their function is not limited to accurate measurement of time. Very often they serve as interior decoration, emphasize the style of the room. Wall clocks fulfill this role more often than others. A mechanical cuckoo clock has become a real symbol of home comfort. This article tells in detail about the history of the creation of antique watches, about all existing types, about the rare watch "Mayak" of the times of the USSR. The article also
Mantel Clock (37 Photos): White Clock And Bronze With Striking, In A Classic Style And In A Different Style, A Clock In A Wooden Case And Other Options
Mantel clocks are an important element of interior decor. What are the features of the white chimney bronze models? How to choose a watch in classic style and other trends? What kinds of mechanisms are there? Which famous brands make watches?
Grandfather Clock (67 Photos): We Choose Mechanical Models With A Pendulum And A Striking In A Wooden Case From Hermle, Italian And Other Manufacturers
Grandfather clocks - a relic of the past or a non-dying classic? Which models are better - mechanical, quartz, with a pendulum and strike, in a wooden case or in a plastic one? Choosing a manufacturer - Hermle, Kieninger, Howard Miller and others
Wall Clock With A Pendulum: Mechanical Clock With Striking In A Wooden Case And Antique Clock With Weights, Other Options. Their Story
A wall clock with a pendulum is a return to the past. They bring coziness and bring joy, but an old clock in a wooden case can interfere with neighbors, which should also not be forgotten when choosing a model. Antique clocks with weights were once used only for the street, and now manufacturers offer their customers a huge selection! Mechanical striking watches are definitely a sign of good taste, and you can learn more about them from the article
Antique Wall Clock (23 Photos): Antique Vintage Clock Gustav Becker And "Pavel Bure", "Henry Moser And Co" And Other Old Clocks On The Wall
Antique wall clocks can perfectly complement the interior. What are the features of antique and vintage watches Gustav Becker, "Pavel Bure" and "Henry Moser &Co"? What is the history of brands?
