2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
An increasingly popular option for interior decoration is laying travertine . There is a special step-by-step technology explaining how to put it on the floor and on the walls. We'll have to take into account a number of subtleties, which now is time to disassemble thoroughly.
Peculiarities
Travertine is a natural stone that has been used for many centuries. It is characterized by excellent wear resistance, mechanical strength and moisture resistance. But another important advantage is outer beauty … Laying travertine the same compatible with old-fashioned and ultra-modern design styles … This material shows itself perfectly both inside the house and in the design of facades.
The stone is light yellow, brown and even deep red colors.
It is very easy to fit into any environment. Travertine tiles are laid in much the same way as usual tiles . However, since it is a natural material, no one cared, of course, that it was easy to cut. However, there are a huge number of options for laying out travertine.
If people want to achieve the perception of a layout as a whole space, it should be used. decorative plasters … In some cases, they try to focus on the elegance of natural raw materials. A luxurious environment is created without problems when using contrast materials … In the overwhelming majority of cases, preference is given to seamless layout . This technique guarantees the disclosure of all the charm of this unusual mineral.
The attractiveness of travertine is due to:
- ease of caring for him;
- resistance to strong heat and even to an open flame;
- versatility of the scope of use;
- flexibility of use;
- chic appearance, elegance.
Travertine tiles must have a very strict geometry . They are characterized by precisely balanced dimensions. Violation of this rule threatens to shift the seams in relation to each other. Lay the material on a completely flat, dry and seasoned surface. Preliminary elimination of defects is achieved by using a screed.
Laying travertine in damp rooms is possible only after preliminary waterproofing.
You will also have to consider moisture resistance the material itself. The tiles are firmly fixed using glue … Spreading too much glue is not recommended. This will only lead to a loss of bond strength.
How to put it on the floor?
Floor laying of stone is done as suture and seamless ways. With a large area of the room, a suture technique is recommended. Even with the involvement of specialists, the shift of the plates becomes inevitable, and therefore the pattern is disturbed. In addition, the natural "breathing" of the material also leads to the appearance of shifts, albeit externally imperceptible. The seams prove to be a very effective means of compensating for microscopic movements, they allow the tiles to remain installed for a very long time.
The best working conditions are created at a temperature of + 10 … 40 degrees Celsius.
This minimizes the initial stacking movement and increases the holding strength. In small rooms, a seamless option will be optimal . The slabs are then laid with gaps of ½ to 1 mm.
Hiding the joints can also be done by "Euro-laying ". In this version, the floor is covered with large slabs with a rough surface finish.
The final grinding is performed after full calculation. The procedure is as follows:
- screed performance;
- placement of slabs without fitting;
- filling the joints with mastic;
- polishing seams under a single plane.
The texture of travertine varies greatly. It is recommended to lay out tiles not from one package, but from different batches . This makes the drawing more beautiful. This method also allows you to simplify the work. There is no need to constantly monitor products, to prevent scratching.
Wall laying technology
Typical travertine can be placed on walls very easily - even reinforcement is not required . In the absence of experience, it is better to abandon various ornaments and patterns, so as not to mark or cut the material. In addition, the modern approach to design determines the popularity of laconic monochrome compositions. It is best if the main part of the display is colored in a neutral tone . Against the background of a monochromatic coating, you can safely introduce single bright accents, expressing maximum imagination in them.
Travertine is best glued to cement-sand glue. Using standard tile adhesive, you can inadvertently change the color of the material.
The procedure is as follows:
- level the walls;
- apply a primer;
- wait for it to dry;
- an adhesive composition is applied;
- carefully lay the tiles on a level (using a rigid support rail).
Large slabs are more difficult to assemble . First of all, the wall is covered with a metal mesh. This supporting structure will have to be plastered. A stone is laid out on a completely dried surface.
Important: after finishing, it is still worth treating it with moisture-resistant liquids that protect against staining.
Recommended:
An Adobe House: The Floor And Walls Are Made Of Adobe Bricks, Do-it-yourself Construction Technology. What Is It And Is It Possible To Build It In Russia? Frame Dwellings With Adobe Walls
An adobe house is a technology forgotten in Russia: the last peak in the popularity of such dwellings came at the beginning of the 20th century, however, with the displacement of bricks and cement, the “clay” approach began to lose its relevance.
Laying Fiberboard On The Floor: How To Fix The Flooring? Substrate Under The Slabs On The Wooden Floor. How To Lay Fiberboard Under Linoleum? Selection Of Nails, Fixing To Concrete Floor
How is fiberboard laid on the floor? What is the best way to attach the flooring to concrete and wood floors? How to make a substrate from a bar under a slab on a wooden floor. What tools and materials are needed when working with fiberboard?
Laying Engineering Boards: On Plywood And Screed, Silane Glue For Installation, Technology And Methods. How To Properly Lay It In A Herringbone Pattern?
What you need to know about laying an engineered board? How is it laid out on plywood and screed? What is remarkable about silane glue for installation, what is the main technology and methods?
Laying Sandstone: On Sand And On A Concrete Base, Do-it-yourself Laying Technology On A Basement. How To Lay On The Ground And Blind Area Around The House?
How is sandstone laid on sand and on a concrete base? Features of the choice of adhesive composition. DIY masonry technology
Laying Ceramic Blocks: Technology For Laying Ceramic Blocks With A Warm Solution. How To Properly Lay Walls With A Grid With Your Own Hands According To Step-by-step Instructions?
What is ceramic block masonry? What is the essence of the technology for laying a ceramic block with a warm solution? We talk about this in our publication
