UV Resin: How To Use UV Epoxy Resin? What It Is?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15

Epoxy UV Resin is a material with special properties that allow it to be used in jewelry and in the manufacture of handicrafts.

Peculiarities

UV Resin Is a colorless gel that hardens under the influence of ultraviolet radiation. It contains only one component, so it does not need to be mixed with a catalyst. The resin can be painted with powder paints and with a paste. In this way, the desired color is obtained. It takes 1-10 minutes to cure, the curing speed depends on the density of the layer and the amount of pigment used. The material remains liquid before exposure to ultraviolet rays. UV resin resembles gel polish, they have an identical curing process. Follow the rules for creating a gel polish manicure when working with resin.

The main advantages of UV resin:

• fast solidification;
• the ability to apply thin layers;
• transparency;
• high strength of the created coating.

UV resin saves time, allows multiple layers to be cast in minutes … The composition does not need to be diluted, it is completely ready for use, there is no probability of making a mistake with the proportions.

Such a resin does not spoil the mold, because, unlike epoxy, it does not have to be kept in them for days.

Areas of use

From common epoxy ultraviolet has a narrower scope of use … Most often it is used in jewelry when creating various jewelry. This material is also used when conducting master classes. On its basis, they create original jewelry. It makes it possible to be realized in creativity, to implement unusual ideas.

How to use?

By consistency UV resin resembles a thick gel … If there is a need to obtain a more liquid substance, it is heated with a hair dryer. The resin pack can also be microwaved for a few seconds or placed on a battery.

Before using the composition, you need to prepare all the necessary equipment and consumables: an ultraviolet lamp, paints, decorative elements

1. At the first stage, the surface is cleaned with alcohol, degreasing it and removing dust.
2. A small amount of dye is mixed with a colorless resin. You can use a metal or plastic stick to mix.
3. Thereafter, paint is added to obtain the desired color. It is important not to overdo it with the amount of dye - this can negatively affect the hardening of the resin.
4. Much depends on the chosen design - in some cases there is a need for temporary "edges" to contain the composition and prevent its spread beyond the boundaries of the product (you can use narrow tape).
5. The first resin layer is applied to the base (it should be thin) and wait for it to harden. Subsequent coats may also contain dye, but if multiple shades are used, each coat must be poured and dried separately.
6. It is necessary to work carefully and unhurriedly. Haste is fraught with the appearance of bubbles. Heating the resin surface to contact with ultraviolet light can cause bubbles to rise to the surface.
7. After fulfilling all the instructions, the product is placed under an ultraviolet lamp for a couple of minutes. If the colorant has already been added to the resin, the time interval must be increased.
8. It is important to remember that the darker the shade, the longer the substance needs to be irradiated with ultraviolet light.
9. New layers are added on top of the hardened ones until the required height and thickness is reached.

UV resin is an easy-to-use material that allows you to bring a variety of creative ideas to life. It is in demand when conducting master classes, you can experiment with it in creativity, create original jewelry with your own hands.