DIY Screw Jack: Drawing Of A Homemade Jack For Lifting The Car, Manufacturing Steps

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10

A car jack is a must-have tool that every car owner should have. Some types of technical malfunctions of the machine can be eliminated with the help of a screw jack. Most often, this mechanism is used to raise the vehicle and change wheels or change tires.

Despite the fact that there are many varieties of such a device, it is the screw jack that is more popular. The small size of the unit makes it possible to transport it even in the smallest car, and the simple design allows you to use the mechanism even without skills.

The price for a screw jack is small, such products are sold in car dealerships.

However, in addition to this, the unit can be made independently.

Peculiarities

An improvised device can be both conventional and heavy machinery. The process of work is reduced to the transformation of the turning stage into translational movement. The key components are the screw-nut and the worm-type gearbox.

Wherein the gearbox supplies a twisting moment to the nut, where, having transformed into a translational movement, it creates a lifting of the load … Improved jacks in the add-on have rollers or balls that help to extend the use of the equipment and speed up the lifting of the machine. But the price of such a model will be much higher.

A self-made device can be used as usual, it is used to raise cars and light trucks to a low height. There are several varieties that differ from each other. To decide which one to do, you need to study everything in more detail.

Rhombic jack is one of the common types. It has 4 rhombus-shaped hinge joints of the screw transmission of the beam. It is the most compact. It is quite easy to make, and in case of breakdown, you can replace parts and use again. The model has increased stability and differs in that there is no displacement point on the body, which is obtained when the car is lifted. However, there are drawbacks everywhere. This model can easily break down if used for other purposes or lifted a very heavy vehicle.

Lever-screw is also quite popular. It ranks second among all types, mainly due to the low price of the parts from which it is made. A fairly simple design allows you to make it in a short time. One of the drawbacks of the view is a little stability and displacement of the fulcrum during lifting of the car.

Combined contains elements of lever and rhombic. Its difference is the stability and strength of the structure. It is difficult to manufacture and use, so it is not considered the best option. The price of the parts is also not happy - it is too high.

Rack screw is a simple option that was previously used for the repair of domestic cars. To make such a jack, you must have at least a little experience.

Any of these types can be made at home, but some will have to work hard to make. Consider the process of creating a jack using available tools.

For use, a special place for the pin is required.

Stages of work

A homemade car jack is usually small and simple in design. This allows even beginners to make it. Usually, materials for manufacturing are inexpensive, and you need very few of them . They can be found at home, in a garage or shed, or purchased from a store.

To work, you need to prepare a steel tube, a square plate, a nut, a washer and a long bolt, as well as a drawing. The latter is the hardest part of the job. Drawings can be found or drawn by yourself. When working on a drawing, you need to indicate the correct sizes of parts, and not do everything "by eye".

The creation itself is not difficult . It is based on a steel tube. The diameter is determined independently, there are no requirements for it. The pipe length must be up to 25 cm.

The first step is to attach the tube to the square plate. It needs to be welded on and the surface cleaned with a grinding disc.

A prepared washer should be placed on the pipe, a long bolt should be inserted into it, onto which a nut must be screwed in advance

Once the mechanical screw jack is ready, it can be used to change the wheels of the machine. Lifting is due to the nut, and the retention is due to the plate, which is the supporting part.

Tips

Not many people decide to make a jack with their own hands, so it is difficult to find advice. However, some points are still worth mentioning.

First of all, special attention should be paid to the following aspects:

• high-quality welding (for joining parts) allows you to get a jack that will not fall apart;
• cutting iron with improvised materials or a grinder is necessary so that the pipe and bolt are of a certain size and fit the drawing;
• processing with a file or grinder makes it possible to get smooth edges of parts;
• painting the parts before assembling the jack is easy enough and will prevent the iron from breaking down.

It is also important to remember about safety measures when performing work. Maintaining health is more important than 1-2 thousand rubles.