Jacks Nordberg: An Overview Of The Rolling N3203, 3 T, 2 T, Bottle And Other Models. How To Choose The Right One?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-15 04:10

If you have your own car, then you probably faced the need to repair it or replace wheels. In order to lift the machine and take the necessary actions, you need to have the appropriate devices. One such device is a jack. Among the large number of manufacturers who are engaged in the production of such devices, one can single out the company Nordberg.

Peculiarities

For more than 16 years, Nordberg has been providing the Russian and foreign markets with high-quality equipment for car services . One of the types of their products are jacks, which differ in their type and purpose, are intended for comfortable access to the lower part of the car without using a viewing hole or a lift.

Some models of jacks are used to restore the original shape of damaged body parts and mount wheels. The brand's products are of high quality, all models have different lifting capacities, pick-up and lift heights.

Views

The range of the brand includes rolling jacks, bottle jacks, pneumatic and pneumohydraulic jacks, as well as jacks for moving a car

Pneumatic jacks can also be called glass jacks . They are necessary if there is a small gap between the load and the support. Jacks of this type are often used during repair and installation work. They are a popular tool among motorists, have a high cost, but when working with them, a minimum of physical effort is required from a person. The high cost of these devices directly depends on the complexity of their design, since all joints are highly sealed, as well as an expensive technology for manufacturing their sealed shells. Such jacks are a structure that is equipped with a rubber sole.

They can be divided according to the number of lifting platforms - there are one-, two- and three-section models.

Hydraulic jacks equipped with a lever, body, pump and piston. Under the influence of pressure on the oil, the piston moves in the housing and presses against the body, lifting the vehicle. The oil pressure is created by a pump, which is driven by a hand lever.

Rolling jacks work with hydraulic force. The design of such devices includes a ground cushion and a sturdy frame, a long handle, a compressor where pressure is generated, and a valve system. Small wheels are provided to ensure the movement of the device. Such devices weigh a lot, so rolling is the only way to move them. Such devices are low cost, durable and easy to use. Such models are usually used in auto repair shops, as they have large dimensions.

The most popular and versatile are bottle jacks . They are used for lifting loads up to 100 tons, while having a very simple design. The structure of the jack has a large supporting base and a fairly compact body. There are two types of bottle jacks - with one or two rolling stocks. Jacks with one rod are usually used for car repair in car repair shops, car repair services, in construction and repair work, in other areas where perpendicular lifting of loads is required.

The version with two rods can lift loads in different directions.

Pneumohydraulic jacks are effective equipment for lifting loads weighing from 20 to 50 tons to the desired height. The case for these options is made of high-strength stainless steel. At the same time, it is the housing for the piston and the oil collector. The movable piston is the main part of these types of jacks, therefore, the efficiency of the structure depends on its quality. Oil is also an irreplaceable part. The mechanism of operation of such jacks is very simple. With the help of a pump, the oil is poured into the cylinder, where the valve moves, and the load moves up.

Jacks for moving cars have a conventional design, they move them using a pick-up under the wheel. Grip adjustment is possible with a foot pedal. The hydraulic drive contributes to the instant drive of the wheel, and the trolley, which has a pin, protects it from independent downward movement.

Popular models

Rolling model 3TH Nordberg N3203 from this manufacturer is intended for lifting loads with a maximum weight of 3 tons. The minimum lifting height is 133 mm, and the maximum is 465 mm, the handle length is 1 m. The model weighs 33 kg and has the following dimensions: depth - 740 mm, width - 370, height - 205 mm.

The model provides for a reinforced structure, a 2-rod quick-lift mechanism, a wear-resistant lowering mechanism through the cardan. The valve is protected against overload. The trolley version is very convenient and intended for professional use. The kit includes a repair kit and a rubber nozzle.

Pneumatic jack model No 022 designed for work in car services and tire shops that service cars weighing up to 2 tons. The model can be used with an extension adapter 80 mm long. The device provides a low grip without much physical effort. The air cushion is made of high quality special rubber. The device is equipped with a rubberized handle.

The minimum lift is 115 mm and the maximum is 430 mm. The device weighs 19 kg and has the following dimensions: depth - 1310 mm, width - 280 mm, height - 140 mm. The maximum pressure is 10 bar.

Bottle Jack Model Nordberg No3120 designed for lifting loads weighing up to 20 tons. This device weighs 10, 5 kg and has the following dimensions: width - 150 mm, length - 260 mm, and height - 170 mm. The handle length is 60 mm and the stroke is 150 mm.

The model is very compact, simple and reliable in operation. With a little physical effort, a smooth lifting of the load occurs, and during its use no auxiliary devices are required.

Criterias of choice

The jack must be in the trunk of every vehicle. But in order to choose a suitable model, it is necessary to outline some criteria.

• Light duty jacks that lift from 1 to 2 tons , are intended specifically for light vehicles.
• Models of jacks with medium lifting capacity that are capable of lifting from 3 to 8 tons are used in auto repair shops. This includes rolling jacks and bottle jacks.
• Heavy duty jacks capable of lifting loads from 15 to 30 tons , designed for trucks and trucks. As a rule, these are hydraulic and pneumatic mechanisms.

So that the use of the jack does not cause any particular difficulties, it must have metal wheels … They are much stronger than other options and are not subject to mechanical stress. It is very good if the kit includes a carrying handle. In order to be able to substitute the jack under any point on the underside of the car, a rubber pad must be included in the kit. Thanks to it, you will soften the pressure of the device on the body of the equipment and prevent dents.

Buy a jack in which the power and lifting height will have a margin. After all, you do not know what kind of car you will have in a year, and what kind of breakdowns it may have.