2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-07 13:49
The article provides a brief description of Metabo chasers and individual models of furrow cutters. Discs for concrete chasers and casings are described. Advice on operation is given.
Peculiarities
From the outset, it should be emphasized that Metabo wall chasers can be considered quite a worthy tool. They are reliable and work well even in rather difficult conditions. This technique is capable of cutting through even hard materials very quickly and with minimal difficulty . The cutting depth is very large.
The characteristic features of the Metabo technique:
- soft start option;
- the ability to fix the spindle;
- prevention of repeated launches;
- disconnection of drives when blocking equipment;
- minimum load on the musculoskeletal system;
- long service life of the equipment.
Model overview
Choosing a decent furrow maker, it makes sense to pay attention to the MFE 40 model with an internal index 604040510.
This device is different:
- sturdy body, obtained by aluminum casting;
- a cut designed for optimal visibility;
- the ability to maintain stable speed under heavy load;
- LED indication of excessively powerful load and blocking during abnormal operation;
- automatic safety clutch for increased safety of use;
- the ability to cut grooves up to 3 cm in one run.
The model with the same name, but with the index 604040500, costs a little more. The weight of such a chaser is 8 kg 980 g. The milling depth reaches 4 cm. Reliable protection against dust penetration is provided.
Technical properties:
- idle speed up to 5000 rpm;
- section of the cutting wheel up to 12.5 cm;
- torsion at rated load at a speed of up to 4200 revolutions;
- torque intensity 6 Nm;
- rated electrical consumption 1, 92 kW;
- power during operation (output) 1, 12 kW;
- weight excluding mains cable 4 kg 600 g.
For concrete, the more professional MFE 65 can also be used . It weighs 18.8 kg, but this weight is fully justified by the capabilities of the product. The groove width can be flexibly adjusted as required. Prevention of unintentional starts is provided. Thanks to the locking spindle, the replacement of the working discs is greatly facilitated.
Technical specifications:
- total power 2, 4 kW;
- 2 main disks;
- the possibility of a cut at 2-6, 5 cm in depth;
- groove width from 0.3 to 4.1 cm (with several intermediate steps);
- the landing section of the disk is 2, 22 cm.
Components and accessories
This list includes more than just discs and shrouds, as is often believed.
For furrowers, the following may also come in handy:
- tension flanges;
- rubber bushings for anchors;
- washers;
- brush holders;
- start buttons;
- ventilation discs;
- half-countersunk screws;
- cable insulators;
- keys;
- lubricants;
-
adjusting nuts;
- thermal sensors;
- indicators;
- handles;
- cross-shaped handles;
- adapters;
- traction;
- clamps;
- friction discs;
- bolts;
- covers;
- spindles and some other parts.
Operating tips
Even the best Metabo equipment, complete with good equipment, must be used carefully and thoughtfully. Appropriate personal protective equipment must of course be used. Diamond blades are better than others because they work more efficiently and wear less.
Moreover, the same abrasive discs create excessive stress on the tool itself. Before starting the device into operation, the surface must not be allowed to touch the cutting part.
Correct gating means making accurate measurements . The depth of the groove for the cable must also take into account the amount of insulation (outer sheath), which must also be hidden. You need to hold the wall chaser strictly with both hands. They need to move slowly; disc braking should occur by itself, and the most correct thing is to wait until it is completed, without trying to force this process. The motor should be periodically purged, and the replacement of brushes is always entrusted to professionals working in a prepared workshop - you cannot change them with your own hands.
Recommended:
Wall Chaser "Zubr": Discs For Concrete Chasers And Brushes, Electric Models "Professional" And Others, An Overview Of Vacuum Cleaners For Chasing Chasers
Shtroborez "Zubr". Discs for concrete chasers, brushes and vacuum cleaner. Electric models of the "Professional" and "Master" series
Blade For Wall Chaser: For Concrete, 125 And 150 Mm, Other Sizes Of Diamond Wheels For Reinforced Concrete. Which One Is Better To Choose? How To Change On A Wall Chaser?
Which blade for a wall chaser to choose for concrete, reinforced concrete: 125 and 150 mm, as well as other sizes of diamond wheels. Recommendations for their replacement and installation
Hilti Wall Chaser: An Overview Of Concrete Models, With And Without Vacuum Cleaner. Choice Of Discs And Brushes For Chasing
What you need to know about a Hilti wall chaser? What should be the basis for the choice of discs and brushes for a chasing cutter, what other accessories can be useful? Overview of concrete models, with and without a vacuum cleaner, tips for use
Bosch Wall Chaser: Models, Disc Replacement And Choice Of Hose For Concrete Chaser, Vacuum Cleaner Selection. Furrow-cutter Nozzle And Its Characteristics
Wall chaser Bosch. Models, disc replacement and hose selection for concrete wall chaser. Vacuum cleaner selection
Arbolite Or Expanded Clay Concrete: Which Is Better? Thermal Conductivity Of Wood Concrete In Comparison With Foam Concrete, Sawdust Concrete, Aerated Concrete, Polystyrene Concrete And Straw Blocks
Before building any structure, it is important to decide which of the building materials is suitable for this. For example, wood concrete or expanded clay concrete. These are two lightweight concrete types with their own advantages and disadvantages. But which one is better? And how much the thermal conductivity coefficient of wood concrete differs in comparison with foam concrete, gas silicate and sawdust concrete