2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
For several decades now, military affairs cannot do without means of protection against chemical weapons. But even in peaceful conditions, waste structures are very attractive. Therefore, it is necessary to know everything about gas masks PMK-3 to appreciate their merits and apply them correctly.
Characteristic
When creating the PMK-3 combined-arms gas mask, the previous modification of the PMK-2 was taken as a basis. But it has been significantly improved. The official description notes that such a device helps protect against:
- radioactive substances;
- dangerous microorganisms;
- potent toxic substances (AHOV);
- dust with radioactive properties;
- light exposure when using nuclear weapons.
PMK-3 is approved for use in any climatic conditions in our country. Working temperatures from -40 to +40 degrees. The maximum permissible air humidity is 98%.
The designers have taken care of the possibility of drinking water even in polluted places . The spectacle assembly is enlarged in comparison with the previous model, and the drinking tube now does not interfere with the simultaneous use of the communication channel.
The following main parameters are declared:
- filter life - up to 240 hours;
- clarity of speech - 95%;
- continuous stay without risk to health - 24 hours;
- net weight (without a special bag) - 0, 96 kg;
- the guaranteed storage period is up to 15 years.
How to store?
The PMK-3 gas mask, like any other model, should protect from shock, shock and vibration . Even metal parts, not to mention glass ones, can suffer. You should not take the exhalation valves in your hands without the direct need. If such valves become clogged or stick together, blow them out carefully. the washing up helmet-masks are produced only in soapy water; before doing this, you must disconnect the box with the absorbing filter.
Storage bag must always be well dried. Otherwise, rust is likely to occur and even a drop in absorption capacity. The distance to heaters and heat sources should be at least 3 m. If you plan to store the gas mask for a long time, the hole in the bottom of the box should be closed rubber stopper … For storage in large volumes, special boxes are used; can be stored PMK-3 and unheated warehouses . Storage on open ground … But then you need to use factory-capped pallets and tarpaulins for shelter. Contact with acids, alkalis and degassing compounds is inadmissible.
The devices should be protected from sunlight and high temperatures. High air humidity is also harmful to them.
How to use?
The instructions clearly state that a gas mask that has got wet for any reason must be removed from the bag as soon as possible . Then it is thoroughly wiped off and dried on open air. In the cold season, if a protective mask and its parts are brought into the room, they must be rub … Periodically follows check the quality of the connecting pipes … To do this, they are stretched and the jersey is not peeled off.
Gas masks from the series "PMK" and "GP-7" pick up , measuring the horizontal of the head at the level of the forehead. The following gradation is adopted:
- 1 size - no more than 0.55 m;
- 2 size - 0, 56-0, 6 m inclusive;
- 3 size - over 0.6 m.
Wear you need a gas mask with you so that the bag does not interfere with normal use. Put on it is necessary with your eyes closed, holding your breath. The mask is applied to the chin and then pulled from the bottom up. In this case, no folds should appear. Do not use a punctured, scratched or otherwise damaged gas mask.
You also need to consider:
- filter expiration date;
- the duration of the regenerative cartridges;
- the need to exercise using a gas mask.
Recommended:
Gas Masks PMG: Characteristics Of Devices PMG And PMG-2, Use, Storage And Care
Gas masks of the PMG and PMG-2 models are often used in paramilitary performances, when creating cosplay. They are being modernized by fans of post-apocalypse and steampunk. What is the difference between the characteristics of these devices? What is the correct use, storage and care for them?
PMK Gas Masks: Decoding. Review Of PMK-1 And PMK-4, PMK-5 And Other Modifications Of Filtering Military Gas Masks
Description and appointment of gas masks. What are the PMK gas masks and what does the abbreviation mean? A brief overview of PMK-1 and PMK-4, their design features and technical characteristics
Civilian Gas Masks: What Is The Difference Between GP Gas Masks And Combined Arms? Types And Purpose, Order Of Use
What are civilian gas masks? What is the difference between GP gas masks and combined-arms respiratory protection systems? What, in general, are the types of civilian gas masks, what are their purpose and capabilities?
Filtering Gas Masks: What Is The Purpose Of Activated Carbon In Gas Masks? Device And Purpose, Principle Of Operation Of Filtering Gas Masks
What are filter masks? What is activated carbon in gas masks for? What are the components of these PPE? What firms produce them? How to put on and store such a thing correctly? The device and purpose, the principle of operation of filtering gas masks - in our article
Respirators 3M (30 Photos): A Review Of Half Masks And Gas Masks, Filtering Protective Masks For Painting And From Dust, Other Models
Distinctive features of 3m respirators. An overview of half masks, filtering protective masks for painting, dust masks and gas masks. How to choose a 3M respirator?