Dimensions Of Dowel-nails (16 Photos): 6x60 Mm, 6x80 Mm, 8x60 Mm, 8x80 And Other Sizes

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

They began to enjoy great popularity dowel-nails , if you need to make quick installation to a concrete, brick surface. The main plus when working with this fastener - this is a quick installation, it is enough to prepare a hole, insert a dowel into it and hammer in with a hammer.

Specifications

The dowel-nail design consists of two parts - a nail and a sleeve (dowel) . The liner looks like a cylinder made of plastic or steel. On the sides there are spacer mustaches, which are straightened when the nail is installed. Technical characteristics of the dowel-nail comply with GOST standards, while slight deviations of parameters are allowed - changes in the size of the diameter, weight, length or structure of the fastener. Dowels are made from a steel rod, the alloy of which must be resistant to various loads. Hardness products range from 54 to 56 HRC (Rockwell).

Allowable curvature rod less than 5 centimeters - 0.1 millimeter, rod more than 5 cm - up to 0. the surfaces of the fasteners are allowed traces from the clips used in processing.

If the dowel has a grooved surface, the distance between the faces can be up to 0.8, and the depth between them is not higher than 0.15.

The surface of the nail is processed protective zinc layer , not less than 6-7 micrometers thick. Load depending on the diameter, the length of the fastener and the material into which the dowel was driven, it may be different. It is necessary to consider base density , with which to work, as well as how and in what plane the installation will take place - vertical or horizontal (floor, wall, ceiling). There is an asymmetrical thread on the nail, which should not make it difficult to insert it into the sleeve, but thanks to it, the nail cannot be pulled out or unscrewed.

The dowels themselves are made of plastic - polypropylene, nylon, polyethylene . They withstand surfaces made of concrete - 200-450 kilograms, from brick - 150-400 kilograms. Just like nails, they can be produced from a steel bar, such fasteners are used as heavy ones and can withstand a load of up to 5 tons. The color of the plastic can be white, black, gray, blue, red and orange.

Size range of species

According to the standards, the dowels are made with a diameter of 5, 6, 8, 10 mm . There are also less common ones, for example 4 mm. The length varies from 20 to 150 mm, The size of the dowel-nail is selected according to the design parameters. For a symbol, two values are indicated in the marking, the first is the diameter, the second is the length. The most popular size range of fasteners is 4x20, 4x40 mm, 5x30, 5x40 mm, 6x30, 6x35, 6x40, 6x50, 6x52, 6x60 mm, 6x70 mm, 6x80 mm, 6x100 mm, 8x40, 8x50, 8x60, 8x80 mm, 8x100 mm, 10x50, 10x60, 10x80, 10x100 mm, 10x120 mm, 10x160 mm, 12x60, 12x70, 12x80 mm.

Also, the sizes of hardware can be determined using tables, which indicate all the necessary parameters for each type.

Dowel-fasteners are divided into types

• Umbrella (or front) … Differs in a cap of a large size and length. Designed for fixing large layers of insulation. The nail can be made of steel or impact resistant plastic.
• Chemical … Fastening takes place by means of a glue capsule. There is a chemical dowel of ampoule and injection types.
• KBT (or fasteners for aerated concrete) … During installation, threading occurs, but the base material itself is not destroyed. It can withstand loads from 400 to 600 kilograms.
• Universal … Designed both for surfaces with voids and for solid surfaces. When installing the nail, the sleeve "twists" and forms a kind of knot, which provides reliable adhesion and fixation.
• Molly (or folding spring) dowel. It is made of steel and when installed "folds", it is mounted in thin and hollow walls. Also popularly it can be called a butterfly dowel.
• Spacer … It has additional fastening whiskers, it can be three-spaced, four-spaced and six-spaced. A threaded nail is driven in with a hammer.
• Frame … Its distinctive feature is the shape of the non-expansion part, it is elongated.
• Metallic for concrete … It is best to use a special gun for fasteners, but manual installation can be done. Holes must be prepared in advance.

It should be noted that some models come with a sealing washer.

Selection rules

Before you buy dowel fasteners, you need to find out in which surface it will be mounted . An important parameter when choosing is diameter and length of the fastener . The larger they are, the more load it can withstand. It also takes into account the thickness, surface density and the presence of voids.

For example, for a plinth, the most common universal dowels with a diameter of 0.6 centimeters and a length of up to 8 centimeters are suitable. This is one of the reliable fasteners, but if the dismantling of the structure is required, problems can arise. It must be remembered that before installation, all the necessary markings are applied for mounting on the wall and under the holes on the baseboard, which will be drilled out in advance in the future . The diameter of the holes must be equal to the diameter of the dowel.

For a toilet with small dimensions installation with dowels would be the most practical option. Complete with hardware should be rubber washers or gaskets. Here you also need to measure the surface and apply a markup where the fasteners will be inserted. Next, a hole is drilled in the tile with a drill, and then with a construction perforator in concrete. For insulation and foam, facade specimens are suitable, at their base there is a special toothed thread, thanks to which the dowel-nail is securely attached to the base.

As a fastener for a TV, for a wall hallway, for hanging a kitchen, shelves and other furniture , which will be installed in a vertical plane, it is better to use metal nails for aerated concrete or frame nails.

An expansion dowel is also a good option, it will not damage or destroy the wall during installation.